|
Properties |
|
addrDepFiltering |
Specifies the 'Address Dep. Filtering' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Address Dep. Filtering (ISA NAT Member Stats)
|
|
addrDepFilteringPeriodic |
Specifies the 'Address Dep. Filtering' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Address Dep. Filtering (ISA NAT Member Stats)
|
|
anyV6L4Expired |
Specifies the 'any V6 L4 expired' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Any V6 L4 Expired (ISA NAT Member Stats)
|
|
anyV6L4ExpiredPeriodic |
Specifies the 'any V6 L4 expired' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Any V6 L4 Expired (ISA NAT Member Stats)
|
|
arpsIgnored |
Specifies the 'ARPs Ignored' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ARPs Ignored (ISA NAT Member Stats)
|
|
arpsIgnoredPeriodic |
Specifies the 'ARPs Ignored' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ARPs Ignored (ISA NAT Member Stats)
|
|
destIpIsUnroutable |
Specifies the 'Dest. IP Is Unroutable' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Dest. IP Is Unroutable (ISA NAT Member Stats)
|
|
destIpIsUnroutablePeriodic |
Specifies the 'Dest. IP Is Unroutable' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Dest. IP Is Unroutable (ISA NAT Member Stats)
|
|
destNatDestIpMismatch |
Specifies the 'Dest. NAT dest. IP mismatch' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Dest. NAT Dest. IP Mismatch (ISA NAT Member Stats)
|
|
destNatDestIpMismatchPeriodic |
Specifies the 'Dest. NAT dest. IP mismatch' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Dest. NAT Dest. IP Mismatch (ISA NAT Member Stats)
|
|
destNatForeignIpMismatch |
Specifies the 'Dest. NAT foreign IP mismatch' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Dest. NAT Foreign IP Mismatch (ISA NAT Member Stats)
|
|
destNatForeignIpMismatchPeriodic |
Specifies the 'Dest. NAT foreign IP mismatch' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Dest. NAT Foreign IP Mismatch (ISA NAT Member Stats)
|
|
droppedMulticast |
Specifies the 'Dropped Multicast' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Dropped Multicast (ISA NAT Member Stats)
|
|
droppedMulticastPeriodic |
Specifies the 'Dropped Multicast' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Dropped Multicast (ISA NAT Member Stats)
|
|
drpdWFwdtoPoolDMZ |
Specifies the Pkts Dropped while forwarding to pool DMZ.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Dropped while forwarding to pool DMZ (ISA NAT Member Stats)
|
|
drpdWFwdtoPoolDMZPeriodic |
Specifies the Pkts Dropped while forwarding to pool DMZ.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Dropped while forwarding to pool DMZ (ISA NAT Member Stats)
|
|
dsLiteUnknownAftr |
Specifies the 'DS Lite Unknown AFTR' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=DS Lite Unknown AFTR (ISA NAT Member Stats)
|
|
dsLiteUnknownAftrPeriodic |
Specifies the 'DS Lite Unknown AFTR' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=DS Lite Unknown AFTR (ISA NAT Member Stats)
|
|
dsLiteUnrecognizedNextHdr |
Specifies the 'DS Lite Unrecognized Next Hdr' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=DS Lite Unrecognized Next Hdr (ISA NAT Member Stats)
|
|
dsLiteUnrecognizedNextHdrPeriodic |
Specifies the 'DS Lite Unrecognized Next Hdr' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=DS Lite Unrecognized Next Hdr (ISA NAT Member Stats)
|
|
firewallAddrDepFiltering |
Specifies the 'firewall addr. dep. filtering' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Firewall Address Dep. Filtering (ISA NAT Member Stats)
|
|
firewallAddrDepFilteringPeriodic |
Specifies the 'firewall addr. dep. filtering' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Firewall Address Dep. Filtering (ISA NAT Member Stats)
|
|
flowCreateFailedKey |
Specifies the 'flow create failed, key ambiguous' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Flow Create Failed, Key Ambiguous (ISA NAT Member Stats)
|
|
flowCreateFailedKeyPeriodic |
Specifies the 'flow create failed, key ambiguous' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Flow Create Failed, Key Ambiguous (ISA NAT Member Stats)
|
|
flowCreateFailedPolicies |
Specifies the 'flow create failed, conflicting policies' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Flow Create Failed, Conflicting Policies (ISA NAT Member Stats)
|
|
flowCreateFailedPoliciesPeriodic |
Specifies the 'flow create failed, conflicting policies' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Flow Create Failed, Conflicting Policies (ISA NAT Member Stats)
|
|
flowCreateLogged |
Specifies the 'Flow Create Logged' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Flow Create Logged (ISA NAT Member Stats)
|
|
flowCreateLoggedPeriodic |
Specifies the 'Flow Create Logged' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Flow Create Logged (ISA NAT Member Stats)
|
|
flowDeleteLogged |
Specifies the 'Flow Delete Logged' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Flow Delete Logged (ISA NAT Member Stats)
|
|
flowDeleteLoggedPeriodic |
Specifies the 'Flow Delete Logged' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Flow Delete Logged (ISA NAT Member Stats)
|
|
flowLogFailed |
Specifies the 'Flow Log Failed' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Flow Log Failed (ISA NAT Member Stats)
|
|
flowLogFailedPeriodic |
Specifies the 'Flow Log Failed' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Flow Log Failed (ISA NAT Member Stats)
|
|
flowLogPktRateLimitDropped |
Specifies the 'flow log pkt rate limit dropped' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Flow Log Packet Rate Limit Dropped (ISA NAT Member Stats)
|
|
flowLogPktRateLimitDroppedPeriodic |
Specifies the 'flow log pkt rate limit dropped' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Flow Log Packet Rate Limit Dropped (ISA NAT Member Stats)
|
|
flowLogPktTx |
Specifies the 'Flow Log Packet TX' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Flow Log Packet TX (ISA NAT Member Stats)
|
|
flowLogPktTxPeriodic |
Specifies the 'Flow Log Packet TX' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Flow Log Packet TX (ISA NAT Member Stats)
|
|
forcedPortRangeConflictsWithOutsideIP |
Specifies the 'forced port range conflicts with outside IP' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Forced Port Range Conflicts With Outside IP (ISA NAT Member Stats)
|
|
forcedPortRangeConflictsWithOutsideIPPeriodic |
Specifies the 'forced port range conflicts with outside IP' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Forced Port Range Conflicts With Outside IP (ISA NAT Member Stats)
|
|
forwardedDSLiteV6Pkts |
Specifies the 'Forwarded DS-Lite V6 Packets' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Forwarded DS-Lite V6 Packets (ISA NAT Member Stats)
|
|
forwardedDSLiteV6PktsPeriodic |
Specifies the 'Forwarded DS-Lite V6 Packets' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Forwarded DS-Lite V6 Packets (ISA NAT Member Stats)
|
|
foundFlow |
Specifies the 'Found Flow' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Found Flow (ISA NAT Member Stats)
|
|
foundFlowPeriodic |
Specifies the 'Found Flow' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Found Flow (ISA NAT Member Stats)
|
|
fragListCleanupInProgress |
Specifies the 'frag. list cleanup in progress' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragment List Cleanup In Progress (ISA NAT Member Stats)
|
|
fragListCleanupInProgressPeriodic |
Specifies the 'frag. list cleanup in progress' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragment List Cleanup In Progress (ISA NAT Member Stats)
|
|
fragmentListExpired |
Specifies the 'Fragment List Expired' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragment List Expired (ISA NAT Member Stats)
|
|
fragmentListExpiredPeriodic |
Specifies the 'Fragment List Expired' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragment List Expired (ISA NAT Member Stats)
|
|
fragmentRateTooHigh |
Specifies the 'Fragment Rate Too High' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragment Rate Too High (ISA NAT Member Stats)
|
|
fragmentRateTooHighPeriodic |
Specifies the 'Fragment Rate Too High' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragment Rate Too High (ISA NAT Member Stats)
|
|
fragmentsRXDORMANT |
Specifies the 'Fragments RX DORMANT' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments RX DORMANT (ISA NAT Member Stats)
|
|
fragmentsRXDORMANTPeriodic |
Specifies the 'Fragments RX DORMANT' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments RX DORMANT (ISA NAT Member Stats)
|
|
fragmentsRXDSL |
Specifies the 'Fragments RX DSL' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments RX DSL (ISA NAT Member Stats)
|
|
fragmentsRXDSLPeriodic |
Specifies the 'Fragments RX DSL' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments RX DSL (ISA NAT Member Stats)
|
|
fragmentsRXL2A |
Specifies the 'Fragments RX L2A' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments RX L2A (ISA NAT Member Stats)
|
|
fragmentsRXL2APeriodic |
Specifies the 'Fragments RX L2A' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments RX L2A (ISA NAT Member Stats)
|
|
fragmentsRXLSN |
Specifies the 'Fragments RX LSN' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments RX LSN (ISA NAT Member Stats)
|
|
fragmentsRXLSNPeriodic |
Specifies the 'Fragments RX LSN' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments RX LSN (ISA NAT Member Stats)
|
|
fragmentsRXOUT |
Specifies the 'Fragments RX OUT' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments RX OUT (ISA NAT Member Stats)
|
|
fragmentsRXOUTPeriodic |
Specifies the 'Fragments RX OUT' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments RX OUT (ISA NAT Member Stats)
|
|
fragmentsTXDORMANT |
Specifies the 'Fragments TX DORMANT' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments TX DORMANT (ISA NAT Member Stats)
|
|
fragmentsTXDORMANTPeriodic |
Specifies the 'Fragments TX DORMANT' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments TX DORMANT (ISA NAT Member Stats)
|
|
fragmentsTXDSL |
Specifies the 'Fragments TX DSL' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments TX DSL (ISA NAT Member Stats)
|
|
fragmentsTXDSLPeriodic |
Specifies the 'Fragments TX DSL' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments TX DSL (ISA NAT Member Stats)
|
|
fragmentsTXL2A |
Specifies the 'Fragments TX L2A' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments TX L2A (ISA NAT Member Stats)
|
|
fragmentsTXL2APeriodic |
Specifies the 'Fragments TX L2A' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments TX L2A (ISA NAT Member Stats)
|
|
fragmentsTXLSN |
Specifies the 'Fragments TX LSN' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments TX LSN (ISA NAT Member Stats)
|
|
fragmentsTXLSNPeriodic |
Specifies the 'Fragments TX LSN' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments TX LSN (ISA NAT Member Stats)
|
|
fragmentsTXNAT64 |
Specifies the 'Fragments TX NAT64' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments TX NAT64 (ISA NAT Member Stats)
|
|
fragmentsTXNAT64Periodic |
Specifies the 'Fragments TX NAT64' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments TX NAT64 (ISA NAT Member Stats)
|
|
fragmentsTXOUT |
Specifies the 'Fragments TX OUT' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments TX OUT (ISA NAT Member Stats)
|
|
fragmentsTXOUTPeriodic |
Specifies the 'Fragments TX OUT' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Fragments TX OUT (ISA NAT Member Stats)
|
|
fwdtoPoolDMZ |
Specifies the Pkts Forwarded to pool DMZ.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Forwarded to pool DMZ (ISA NAT Member Stats)
|
|
fwdtoPoolDMZPeriodic |
Specifies the Pkts Forwarded to pool DMZ.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Forwarded to pool DMZ (ISA NAT Member Stats)
|
|
greExpired |
Specifies the 'GRE Expired' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=GRE Expired (ISA NAT Member Stats)
|
|
greExpiredPeriodic |
Specifies the 'GRE Expired' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=GRE Expired (ISA NAT Member Stats)
|
|
iCMPchecksumError |
Specifies the 'ICMP Checksum Error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Checksum Error (ISA NAT Member Stats)
|
|
iCMPchecksumErrorPeriodic |
Specifies the 'ICMP Checksum Error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Checksum Error (ISA NAT Member Stats)
|
|
iCMPembeddedChecksumError |
Specifies the 'ICMP Embedded Checksum Error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Embedded Checksum Error (ISA NAT Member Stats)
|
|
iCMPembeddedChecksumErrorPeriodic |
Specifies the 'ICMP Embedded Checksum Error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Embedded Checksum Error (ISA NAT Member Stats)
|
|
iCMPlengthError |
Specifies the 'ICMP Length Error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Length Error (ISA NAT Member Stats)
|
|
iCMPlengthErrorPeriodic |
Specifies the 'ICMP Length Error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Length Error (ISA NAT Member Stats)
|
|
iCMPlocalUnsupported |
Specifies the 'ICMP Local Unsupported' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Local Unsupported (ISA NAT Member Stats)
|
|
iCMPlocalUnsupportedPeriodic |
Specifies the 'ICMP Local Unsupported' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Local Unsupported (ISA NAT Member Stats)
|
|
iCMPtooShort |
Specifies the 'ICMP Too Short' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Too Short (ISA NAT Member Stats)
|
|
iCMPtooShortPeriodic |
Specifies the 'ICMP Too Short' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Too Short (ISA NAT Member Stats)
|
|
iCMPtypeUnsupported |
Specifies the 'ICMP Type Unsupported' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Type Unsupported (ISA NAT Member Stats)
|
|
iCMPtypeUnsupportedPeriodic |
Specifies the 'ICMP Type Unsupported' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Type Unsupported (ISA NAT Member Stats)
|
|
iCMPunsupportedL3 |
Specifies the 'ICMP Unsupported L3' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Unsupported Embedded L3 (ISA NAT Member Stats)
|
|
iCMPunsupportedL3Periodic |
Specifies the 'ICMP Unsupported L3' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Unsupported Embedded L3 (ISA NAT Member Stats)
|
|
iCMPunsupportedL4 |
Specifies the 'ICMP Unsupported L4' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Unsupported Embedded L4 (ISA NAT Member Stats)
|
|
iCMPunsupportedL4Periodic |
Specifies the 'ICMP Unsupported L4' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Unsupported Embedded L4 (ISA NAT Member Stats)
|
|
iPv4OptIPv6ExtHeaders |
Specifies the 'IPv4 Opt /IPv6 Ext Headers' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv4 Opt /IPv6 Ext Headers (ISA NAT Member Stats)
|
|
iPv4OptIPv6ExtHeadersPeriodic |
Specifies the 'IPv4 Opt /IPv6 Ext Headers' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv4 Opt /IPv6 Ext Headers (ISA NAT Member Stats)
|
|
iPv4UndefinedError |
Specifies the 'IPv4 Undefined Error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv4 Undefined Error (ISA NAT Member Stats)
|
|
iPv4UndefinedErrorPeriodic |
Specifies the 'IPv4 Undefined Error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv4 Undefined Error (ISA NAT Member Stats)
|
|
iPv4headerChecksumViolation |
Specifies the 'IPv4 Header Checksum Violation' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv4 Header Checksum Violation (ISA NAT Member Stats)
|
|
iPv4headerChecksumViolationPeriodic |
Specifies the 'IPv4 Header Checksum Violation' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv4 Header Checksum Violation (ISA NAT Member Stats)
|
|
iPv4headerMalformed |
Specifies the 'IPv4 Header Malformed' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv4 Header Malformed (ISA NAT Member Stats)
|
|
iPv4headerMalformedPeriodic |
Specifies the 'IPv4 Header Malformed' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv4 Header Malformed (ISA NAT Member Stats)
|
|
iPv4malformedPacket |
Specifies the 'IPv4 Malformed Packet' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv4 Malformed Packet (ISA NAT Member Stats)
|
|
iPv4malformedPacketPeriodic |
Specifies the 'IPv4 Malformed Packet' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv4 Malformed Packet (ISA NAT Member Stats)
|
|
iPv4ttlZero |
Specifies the 'IPv4 TTL Zero' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv4 TTL Zero (ISA NAT Member Stats)
|
|
iPv4ttlZeroPeriodic |
Specifies the 'IPv4 TTL Zero' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv4 TTL Zero (ISA NAT Member Stats)
|
|
iPv6FragmentsUnsupported |
Specifies the 'IPv6 fragments Unsupported' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv6 fragments Unsupported (ISA NAT Member Stats)
|
|
iPv6FragmentsUnsupportedPeriodic |
Specifies the 'IPv6 fragments Unsupported' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv6 fragments Unsupported (ISA NAT Member Stats)
|
|
icmp6PtbDroppedMtu1280 |
Specifies the 'ICMP6 PTB dropped (mtu less than 1280)' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP6 PTB Dropped (ISA NAT Member Stats)
|
|
icmp6PtbDroppedMtu1280Periodic |
Specifies the 'ICMP6 PTB dropped (mtu less than 1280)' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP6 PTB Dropped (ISA NAT Member Stats)
|
|
icmpEmbeddedIPv6ExtHdrParseError |
Specifies the 'ICMP embedded IPv6 ext. hdr parse error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Embedded IPv6 Ext. Hdr Parse Error (ISA NAT Member Stats)
|
|
icmpEmbeddedIPv6ExtHdrParseErrorPeriodic |
Specifies the 'ICMP embedded IPv6 ext. hdr parse error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Embedded IPv6 Ext. Hdr Parse Error (ISA NAT Member Stats)
|
|
icmpErrorExtLengthErrorTranslation |
Specifies the 'ICMP error ext length error for 4 to 6 translation' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Error Ext Length Error for 4 to 6 Translation (ISA NAT Member Stats)
|
|
icmpErrorExtLengthErrorTranslationPeriodic |
Specifies the 'ICMP error ext length error for 4 to 6 translation' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Error Ext Length Error for 4 to 6 Translation (ISA NAT Member Stats)
|
|
icmpExpired |
Specifies the 'ICMP Expired' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Expired (ISA NAT Member Stats)
|
|
icmpExpiredPeriodic |
Specifies the 'ICMP Expired' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Expired (ISA NAT Member Stats)
|
|
icmpFragmentedError |
Specifies the 'ICMP/ICMPv6 fragmented error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP/ICMPv6 Fragmented Error (ISA NAT Member Stats)
|
|
icmpFragmentedErrorPeriodic |
Specifies the 'ICMP/ICMPv6 fragmented error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP/ICMPv6 Fragmented Error (ISA NAT Member Stats)
|
|
icmpLocal |
Specifies the 'ICMP Local' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Local (ISA NAT Member Stats)
|
|
icmpLocalPeriodic |
Specifies the 'ICMP Local' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Local (ISA NAT Member Stats)
|
|
icmpTypeUnsupportedFor4To6Translation |
Specifies the 'ICMP type unsupported for 4 to 6 translation' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Type Unsupported For 4 to 6 Translation (ISA NAT Member Stats)
|
|
icmpTypeUnsupportedFor4To6TranslationPeriodic |
Specifies the 'ICMP type unsupported for 4 to 6 translation' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMP Type Unsupported For 4 to 6 Translation (ISA NAT Member Stats)
|
|
icmpv6TypeUnsupported |
Specifies the 'ICMPv6 type unsupported' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMPv6 Type Unsupported (ISA NAT Member Stats)
|
|
icmpv6TypeUnsupportedPeriodic |
Specifies the 'ICMPv6 type unsupported' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICMPv6 Type Unsupported (ISA NAT Member Stats)
|
|
icsStandbyDrop |
Specifies the 'ICS standby drop' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICS Standby Drop (ISA NAT Member Stats)
|
|
icsStandbyDropPeriodic |
Specifies the 'ICS standby drop' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=ICS Standby Drop (ISA NAT Member Stats)
|
|
ipv6DownstreamProhibited |
Specifies the 'IPv6 downstream prohibited' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv6 Downstream Prohibited (ISA NAT Member Stats)
|
|
ipv6DownstreamProhibitedPeriodic |
Specifies the 'IPv6 downstream prohibited' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv6 Downstream Prohibited (ISA NAT Member Stats)
|
|
ipv6ExtHdrParseError |
Specifies the 'IPv6 ext. hdr parse error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv6 Ext. Hdr Parse Error (ISA NAT Member Stats)
|
|
ipv6ExtHdrParseErrorPeriodic |
Specifies the 'IPv6 ext. hdr parse error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=IPv6 Ext. Hdr Parse Error (ISA NAT Member Stats)
|
|
lockedByMgmtCore |
Specifies the 'Locked By Management Core' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Locked By Management Core (ISA NAT Member Stats)
|
|
lockedByMgmtCorePeriodic |
Specifies the 'Locked By Management Core' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Locked By Management Core (ISA NAT Member Stats)
|
|
maxFlowExceeded |
Specifies the 'Maximum Flow Exceeded' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Maximum Flow Exceeded (ISA NAT Member Stats)
|
|
maxFlowExceededPeriodic |
Specifies the 'Maximum Flow Exceeded' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Maximum Flow Exceeded (ISA NAT Member Stats)
|
|
mtuExceeded |
Specifies the 'MTU Exceeded' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=MTU Exceeded (ISA NAT Member Stats)
|
|
mtuExceededPeriodic |
Specifies the 'MTU Exceeded' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=MTU Exceeded (ISA NAT Member Stats)
|
|
nat64Disabled |
Specifies the 'NAT64 Disabled' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=NAT64 Disabled (ISA NAT Member Stats)
|
|
nat64DisabledPeriodic |
Specifies the 'NAT64 Disabled' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=NAT64 Disabled (ISA NAT Member Stats)
|
|
nat64FragHasZeroChecksum |
Specifies the 'NAT64 Fragment Has Zero Checksum' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=NAT64 Fragment Has Zero Checksum (ISA NAT Member Stats)
|
|
nat64FragHasZeroChecksumPeriodic |
Specifies the 'NAT64 Fragment Has Zero Checksum' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=NAT64 Fragment Has Zero Checksum (ISA NAT Member Stats)
|
|
nat64IcmpEmbeddedIpv4Options |
Specifies the 'NAT64 ICMP embedded IP has V4 options' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=NAT64 ICMP Embedded IP has V4 Options (ISA NAT Member Stats)
|
|
nat64IcmpEmbeddedIpv4OptionsPeriodic |
Specifies the 'NAT64 ICMP embedded IP has V4 options' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=NAT64 ICMP Embedded IP has V4 Options (ISA NAT Member Stats)
|
|
nat64IcmpFragUnsupported |
Specifies the 'NAT64 ICMP Fragments Unsupported' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=NAT64 ICMP Fragments Unsupported (ISA NAT Member Stats)
|
|
nat64IcmpFragUnsupportedPeriodic |
Specifies the 'NAT64 ICMP Fragments Unsupported' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=NAT64 ICMP Fragments Unsupported (ISA NAT Member Stats)
|
|
nat64InvalidSrcAddr |
Specifies the 'NAT64 Invalid Source Address' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=NAT64 Invalid Source Address (ISA NAT Member Stats)
|
|
nat64InvalidSrcAddrPeriodic |
Specifies the 'NAT64 Invalid Source Address' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=NAT64 Invalid Source Address (ISA NAT Member Stats)
|
|
nat64UnrecogNextHdr |
Specifies the 'NAT64 Unrecognized Next Hdr' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=NAT64 Unrecognized Next Hdr (ISA NAT Member Stats)
|
|
nat64UnrecogNextHdrPeriodic |
Specifies the 'NAT64 Unrecognized Next Hdr' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=NAT64 Unrecognized Next Hdr (ISA NAT Member Stats)
|
|
nat64v4HasZeroChecksum |
Specifies the 'NAT64 v4 Has Zero Checksum' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=NAT64 v4 Has Zero Checksum (ISA NAT Member Stats)
|
|
nat64v4HasZeroChecksumPeriodic |
Specifies the 'NAT64 v4 Has Zero Checksum' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=NAT64 v4 Has Zero Checksum (ISA NAT Member Stats)
|
|
newFlow |
Specifies the 'New Flow' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=New Flow (ISA NAT Member Stats)
|
|
newFlowPeriodic |
Specifies the 'New Flow' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=New Flow (ISA NAT Member Stats)
|
|
noBufToCopyPkt |
Specifies the 'No Buffer To Copy Packet' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Buffer To Copy Packet (ISA NAT Member Stats)
|
|
noBufToCopyPktPeriodic |
Specifies the 'No Buffer To Copy Packet' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Buffer To Copy Packet (ISA NAT Member Stats)
|
|
noDefaultPolicy |
Specifies the 'no default policy' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Default Policy (ISA NAT Member Stats)
|
|
noDefaultPolicyPeriodic |
Specifies the 'no default policy' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Default Policy (ISA NAT Member Stats)
|
|
noHostOrHostGroup |
Specifies the 'No Host or Host Group' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Host or Host Group (ISA NAT Member Stats)
|
|
noHostOrHostGroupPeriodic |
Specifies the 'No Host or Host Group' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Host or Host Group (ISA NAT Member Stats)
|
|
noIpOrPort |
Specifies the 'No IP or Port' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No IP or Port (ISA NAT Member Stats)
|
|
noIpOrPortPeriodic |
Specifies the 'No IP or Port' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No IP or Port (ISA NAT Member Stats)
|
|
noMatchingFlow |
Specifies the 'No Matching Flow' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Matching Flow (ISA NAT Member Stats)
|
|
noMatchingFlowPeriodic |
Specifies the 'No Matching Flow' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Matching Flow (ISA NAT Member Stats)
|
|
noMultipleHostOrSubscrIPsAllowed |
Specifies the 'No Multiple Host Or Subscriber IPs Allowed' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Multiple Host or Subscriber IPs Allowed (ISA NAT Member Stats)
|
|
noMultipleHostOrSubscrIPsAllowedPeriodic |
Specifies the 'No Multiple Host Or Subscriber IPs Allowed' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Multiple Host or Subscriber IPs Allowed (ISA NAT Member Stats)
|
|
noPolicy |
Specifies the 'No Policy' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Policy (ISA NAT Member Stats)
|
|
noPolicyPeriodic |
Specifies the 'No Policy' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Policy (ISA NAT Member Stats)
|
|
noRadiusConnectionResources |
Specifies the 'no radius connection resources' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Radius Connection Resources (ISA NAT Member Stats)
|
|
noRadiusConnectionResourcesPeriodic |
Specifies the 'no radius connection resources' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Radius Connection Resources (ISA NAT Member Stats)
|
|
noRadiusResources |
Specifies the 'no radius resources' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Radius Resources (ISA NAT Member Stats)
|
|
noRadiusResourcesPeriodic |
Specifies the 'no radius resources' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Radius Resources (ISA NAT Member Stats)
|
|
noResource |
Specifies the 'No Resource' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Resource (ISA NAT Member Stats)
|
|
noResourcePeriodic |
Specifies the 'No Resource' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No Resource (ISA NAT Member Stats)
|
|
noSNatEnabled |
Specifies the 'no SNat enabled' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No SNAT Enabled (ISA NAT Member Stats)
|
|
noSNatEnabledPeriodic |
Specifies the 'no SNat enabled' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No SNAT Enabled (ISA NAT Member Stats)
|
|
noTcpUdpChecksum |
Specifies the 'No TCP/UDP Checksum' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No TCP/UDP Checksum (ISA NAT Member Stats)
|
|
noTcpUdpChecksumPeriodic |
Specifies the 'No TCP/UDP Checksum' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=No TCP/UDP Checksum (ISA NAT Member Stats)
|
|
nptv6IidAllOnes |
Specifies the 'Nptv6 IID All 1's' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Nptv6 IID All 1's (ISA NAT Member Stats)
|
|
nptv6IidAllOnesPeriodic |
Specifies the 'Nptv6 IID All 1's' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Nptv6 IID All 1's (ISA NAT Member Stats)
|
|
nptv6MapFailed |
Specifies the 'Nptv6 Map Failed' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Nptv6 Map Failed (ISA NAT Member Stats)
|
|
nptv6MapFailedPeriodic |
Specifies the 'Nptv6 Map Failed' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Nptv6 Map Failed (ISA NAT Member Stats)
|
|
packetHashedToWrongMDA |
Specifies the 'Packet Hashed To Wrong MDA' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Packet Hashed To Wrong MDA (ISA NAT Member Stats)
|
|
packetHashedToWrongMDAPeriodic |
Specifies the 'Packet Hashed To Wrong MDA' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Packet Hashed To Wrong MDA (ISA NAT Member Stats)
|
|
pktError |
Specifies the 'Packet Error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Packet Error (ISA NAT Member Stats)
|
|
pktErrorPeriodic |
Specifies the 'Packet Error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Packet Error (ISA NAT Member Stats)
|
|
pktNotIPv4orIPv6 |
Specifies the 'Packet Not IPv4 Or IPv6' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Packet Not IPv4 Or IPv6 (ISA NAT Member Stats)
|
|
pktNotIPv4orIPv6Periodic |
Specifies the 'Packet Not IPv4 Or IPv6' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Packet Not IPv4 Or IPv6 (ISA NAT Member Stats)
|
|
pktRcvError |
Specifies the 'Packet Receive Error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Packet Receive Error (ISA NAT Member Stats)
|
|
pktRcvErrorPeriodic |
Specifies the 'Packet Receive Error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Packet Receive Error (ISA NAT Member Stats)
|
|
pktRxOnWrongPort |
Specifies the number of packets received on the wrong port.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Packets Received On Wrong Port (ISA NAT Member Stats)
|
|
pktRxOnWrongPortPeriodic |
Specifies the number of packets received on the wrong port.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Packets Received On Wrong Port (ISA NAT Member Stats)
|
|
pktSendError |
Specifies the 'Packet Send Error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Packet Send Error (ISA NAT Member Stats)
|
|
pktSendErrorPeriodic |
Specifies the 'Packet Send Error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Packet Send Error (ISA NAT Member Stats)
|
|
policyDeprecatedSubscr |
Specifies the 'policy is deprecated for subscr.' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Policy is Deprecated for Subscr. (ISA NAT Member Stats)
|
|
policyDeprecatedSubscrPeriodic |
Specifies the 'policy is deprecated for subscr.' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Policy is Deprecated for Subscr. (ISA NAT Member Stats)
|
|
policyNotInUseBySubscriber |
Specifies the 'Policy Not In Use By Subscriber' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Policy Not In Use By Subscriber (ISA NAT Member Stats)
|
|
policyNotInUseBySubscriberPeriodic |
Specifies the 'Policy Not In Use By Subscriber' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Policy Not In Use By Subscriber (ISA NAT Member Stats)
|
|
portRangeLogFailed |
Specifies the 'Port Range Log Failed' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Port Range Log Failed (ISA NAT Member Stats)
|
|
portRangeLogFailedPeriodic |
Specifies the 'Port Range Log Failed' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Port Range Log Failed (ISA NAT Member Stats)
|
|
pppoeUplinkDown |
Specifies the 'PPPoE uplink down' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=PPPoE Uplink Down (ISA NAT Member Stats)
|
|
pppoeUplinkDownPeriodic |
Specifies the 'PPPoE uplink down' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=PPPoE Uplink Down (ISA NAT Member Stats)
|
|
reassembledPkts |
Specifies the 'Reassembled Packets' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Reassembled Packets (ISA NAT Member Stats)
|
|
reassembledPktsPeriodic |
Specifies the 'Reassembled Packets' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Reassembled Packets (ISA NAT Member Stats)
|
|
reassemblyFailures |
Specifies the 'Reassembly Failures' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Reassembly Failures (ISA NAT Member Stats)
|
|
reassemblyFailuresPeriodic |
Specifies the 'Reassembly Failures' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Reassembly Failures (ISA NAT Member Stats)
|
|
requestedOutsidePortConflict |
Specifies the 'requested outside port conflict' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Requested Outside Port Conflict (ISA NAT Member Stats)
|
|
requestedOutsidePortConflictPeriodic |
Specifies the 'requested outside port conflict' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Requested Outside Port Conflict (ISA NAT Member Stats)
|
|
requestedPortNotInHostRange |
Specifies the 'requested port not in host range' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Requested Port Not In Host Range (ISA NAT Member Stats)
|
|
requestedPortNotInHostRangePeriodic |
Specifies the 'requested port not in host range' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Requested Port Not In Host Range (ISA NAT Member Stats)
|
|
serviceChainingDecapsulationError |
Specifies the 'Service-chaining decapsulation error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Service-chaining Decapsulation Error (ISA NAT Member Stats)
|
|
serviceChainingDecapsulationErrorPeriodic |
Specifies the 'Service-chaining decapsulation error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Service-chaining Decapsulation Error (ISA NAT Member Stats)
|
|
serviceChainingEncapsulationError |
Specifies the 'Service-chaining encapsulation error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Service-chaining Encapsulation Error (ISA NAT Member Stats)
|
|
serviceChainingEncapsulationErrorPeriodic |
Specifies the 'Service-chaining encapsulation error' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Service-chaining Encapsulation Error (ISA NAT Member Stats)
|
|
serviceChainingFilterDrop |
Specifies the 'Service-chaining filter drop' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Service-chaining Filter Drop (ISA NAT Member Stats)
|
|
serviceChainingFilterDropPeriodic |
Specifies the 'Service-chaining filter drop' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Service-chaining Filter Drop (ISA NAT Member Stats)
|
|
serviceChainingRx |
Specifies the 'Service-chaining rx' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Service-chaining Rx (ISA NAT Member Stats)
|
|
serviceChainingRxDropped |
Specifies the 'Service-chaining rx dropped' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Service-chaining Rx Dropped (ISA NAT Member Stats)
|
|
serviceChainingRxDroppedPeriodic |
Specifies the 'Service-chaining rx dropped' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Service-chaining Rx Dropped (ISA NAT Member Stats)
|
|
serviceChainingRxPeriodic |
Specifies the 'Service-chaining rx' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Service-chaining Rx (ISA NAT Member Stats)
|
|
serviceChainingTx |
Specifies the 'Service-chaining tx' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Service-chaining Tx (ISA NAT Member Stats)
|
|
serviceChainingTxPeriodic |
Specifies the 'Service-chaining tx' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Service-chaining Tx (ISA NAT Member Stats)
|
|
ssdpDropped |
Specifies the 'SSDP Dropped' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=SSDP Dropped (ISA NAT Member Stats)
|
|
ssdpDroppedPeriodic |
Specifies the 'SSDP Dropped' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=SSDP Dropped (ISA NAT Member Stats)
|
|
ssdpRx |
Specifies the 'SSDP RX' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=SSDP RX (ISA NAT Member Stats)
|
|
ssdpRxPeriodic |
Specifies the 'SSDP RX' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=SSDP RX (ISA NAT Member Stats)
|
|
ssdpTx |
Specifies the 'SSDP TX' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=SSDP TX (ISA NAT Member Stats)
|
|
ssdpTxPeriodic |
Specifies the 'SSDP TX' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=SSDP TX (ISA NAT Member Stats)
|
|
statsType |
type=int
access=read-only
|
|
subscriberIdCached |
Specifies the 'Subscriber-ID Cached' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Subscriber ID Cached (ISA NAT Member Stats)
|
|
subscriberIdCachedPeriodic |
Specifies the 'Subscriber-ID Cached' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Subscriber ID Cached (ISA NAT Member Stats)
|
|
subscriberIdDelayed |
Specifies the 'Subscriber-ID Delayed' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Subscriber ID Delayed (ISA NAT Member Stats)
|
|
subscriberIdDelayedPeriodic |
Specifies the 'Subscriber-ID Delayed' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Subscriber ID Delayed (ISA NAT Member Stats)
|
|
subscriberIdTimeout |
Specifies the 'Subscriber-ID Timeout' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Subscriber ID Timeout (ISA NAT Member Stats)
|
|
subscriberIdTimeoutPeriodic |
Specifies the 'Subscriber-ID Timeout' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Subscriber ID Timeout (ISA NAT Member Stats)
|
|
subscriberIdUnknown |
Specifies the 'Subscriber-ID Unknown' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Subscriber ID Unknown (ISA NAT Member Stats)
|
|
subscriberIdUnknownPeriodic |
Specifies the 'Subscriber-ID Unknown' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Subscriber ID Unknown (ISA NAT Member Stats)
|
|
tCPnoFlow |
Specifies the 'TCP No Flow' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=TCP No Flow (ISA NAT Member Stats)
|
|
tCPnoFlowForFIN |
Specifies the 'TCP No Flow For FIN' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=TCP No Flow for FIN (ISA NAT Member Stats)
|
|
tCPnoFlowForFINPeriodic |
Specifies the 'TCP No Flow For FIN' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=TCP No Flow for FIN (ISA NAT Member Stats)
|
|
tCPnoFlowForRST |
Specifies the 'TCP No Flow For RST' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=TCP No Flow For RST (ISA NAT Member Stats)
|
|
tCPnoFlowForRSTPeriodic |
Specifies the 'TCP No Flow For RST' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=TCP No Flow For RST (ISA NAT Member Stats)
|
|
tCPnoFlowPeriodic |
Specifies the 'TCP No Flow' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=TCP No Flow (ISA NAT Member Stats)
|
|
tcpClosed |
Specifies the 'TCP Closed' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=TCP Closed (ISA NAT Member Stats)
|
|
tcpClosedPeriodic |
Specifies the 'TCP Closed' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=TCP Closed (ISA NAT Member Stats)
|
|
tcpExpired |
Specifies the 'TCP Expired' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=TCP Expired (ISA NAT Member Stats)
|
|
tcpExpiredPeriodic |
Specifies the 'TCP Expired' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=TCP Expired (ISA NAT Member Stats)
|
|
tcpResetWaiting |
Specifies the 'TCP reset waiting' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=TCP Reset Waiting (ISA NAT Member Stats)
|
|
tcpResetWaitingPeriodic |
Specifies the 'TCP reset waiting' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=TCP Reset Waiting (ISA NAT Member Stats)
|
|
tcpUdpChecksumFailure |
Specifies the 'TCP/UDP Checksum Failure' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=TCP/UDP Checksum Failure (ISA NAT Member Stats)
|
|
tcpUdpChecksumFailurePeriodic |
Specifies the 'TCP/UDP Checksum Failure' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=TCP/UDP Checksum Failure (ISA NAT Member Stats)
|
|
tcpUdpMalformed |
Specifies the 'TCP/UDP Malformed' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=TCP/UDP Malformed (ISA NAT Member Stats)
|
|
tcpUdpMalformedPeriodic |
Specifies the 'TCP/UDP Malformed' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=TCP/UDP Malformed (ISA NAT Member Stats)
|
|
tempNoPolicy |
Specifies the 'temp. no policy' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Temp. No Policy (ISA NAT Member Stats)
|
|
tempNoPolicyPeriodic |
Specifies the 'temp. no policy' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Temp. No Policy (ISA NAT Member Stats)
|
|
toLocal |
Specifies the 'To Local' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=To Local (ISA NAT Member Stats)
|
|
toLocalIgnored |
Specifies the 'To Local Ignored' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=To Local Ignored (ISA NAT Member Stats)
|
|
toLocalIgnoredPeriodic |
Specifies the 'To Local Ignored' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=To Local Ignored (ISA NAT Member Stats)
|
|
toLocalPeriodic |
Specifies the 'To Local' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=To Local (ISA NAT Member Stats)
|
|
tooManyFragListsForFlow |
Specifies the 'too many Fragment lists for flow' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Too Many Fragment Lists For Flow (ISA NAT Member Stats)
|
|
tooManyFragListsForFlowPeriodic |
Specifies the 'too many Fragment lists for flow' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Too Many Fragment Lists For Flow (ISA NAT Member Stats)
|
|
tooManyFragmentHoles |
Specifies the 'Too Many Fragment Holes' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Too Many Fragment Holes (ISA NAT Member Stats)
|
|
tooManyFragmentHolesPeriodic |
Specifies the 'Too Many Fragment Holes' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Too Many Fragment Holes (ISA NAT Member Stats)
|
|
tooManyFragmentedPackets |
Specifies the 'Too Many Fragmented Packets' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Too Many Fragmented Packets (ISA NAT Member Stats)
|
|
tooManyFragmentedPacketsPeriodic |
Specifies the 'Too Many Fragmented Packets' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Too Many Fragmented Packets (ISA NAT Member Stats)
|
|
tooManyFragmentsForIpPacket |
Specifies the 'Too Many Fragments For IP Packet' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Too Many Fragments For IP Packet (ISA NAT Member Stats)
|
|
tooManyFragmentsForIpPacketPeriodic |
Specifies the 'Too Many Fragments For IP Packet' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Too Many Fragments For IP Packet (ISA NAT Member Stats)
|
|
tooManyFragsBuffered |
Specifies the 'Too Many Fragments Buffered' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Too Many Fragments Buffered (ISA NAT Member Stats)
|
|
tooManyFragsBufferedPeriodic |
Specifies the 'Too Many Fragments Buffered' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Too Many Fragments Buffered (ISA NAT Member Stats)
|
|
udpExpired |
Specifies the 'UDP Expired' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=UDP Expired (ISA NAT Member Stats)
|
|
udpExpiredPeriodic |
Specifies the 'UDP Expired' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=UDP Expired (ISA NAT Member Stats)
|
|
unresolvedL2AwareV6Host |
Specifies the 'unresolved L2-aware V6 host' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Unresolved L2-aware V6 Host (ISA NAT Member Stats)
|
|
unresolvedL2AwareV6HostPeriodic |
Specifies the 'unresolved L2-aware V6 host' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Unresolved L2-aware V6 Host (ISA NAT Member Stats)
|
|
unsupportedProtocol |
Specifies the 'Unsupported Protocol' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Unsupported Protocol (ISA NAT Member Stats)
|
|
unsupportedProtocolPeriodic |
Specifies the 'Unsupported Protocol' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Unsupported Protocol (ISA NAT Member Stats)
|
|
upnpDropped |
Specifies the 'UPnP Dropped' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=UPnP Dropped (ISA NAT Member Stats)
|
|
upnpDroppedPeriodic |
Specifies the 'UPnP Dropped' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=UPnP Dropped (ISA NAT Member Stats)
|
|
upnpRateTooHigh |
Specifies the 'UPnP Rate Too High' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=UPnP Rate Too High (ISA NAT Member Stats)
|
|
upnpRateTooHighPeriodic |
Specifies the 'UPnP Rate Too High' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=UPnP Rate Too High (ISA NAT Member Stats)
|
|
upnpRx |
Specifies the 'UPnP RX' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=UPnP RX (ISA NAT Member Stats)
|
|
upnpRxPeriodic |
Specifies the 'UPnP RX' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=UPnP RX (ISA NAT Member Stats)
|
|
upnpTx |
Specifies the 'UPnP TX' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=UPnP TX (ISA NAT Member Stats)
|
|
upnpTxPeriodic |
Specifies the 'UPnP TX' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=UPnP TX (ISA NAT Member Stats)
|
|
v4PktsFragmented |
Specifies the 'Fragmented Ipv4 Packets .
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Ipv4 Packets Fragmented (ISA NAT Member Stats)
|
|
v4PktsFragmentedPeriodic |
Specifies the 'Fragmented Ipv4 Packets .
type=UInt128
access=read-only
default=0
Displayed(tab/group)=Ipv4 Packets Fragmented (ISA NAT Member Stats)
|
|
v6PktsFragmented |
Specifies the 'V6 Packets Fragmented' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=V6 Packets Fragmented (ISA NAT Member Stats)
|
|
v6PktsFragmentedPeriodic |
Specifies the 'V6 Packets Fragmented' stats value.
type=UInt128
access=read-only
default=0
Displayed(tab/group)=V6 Packets Fragmented (ISA NAT Member Stats)
|