nat
Nat64Config



public class Nat64Config

Properties
adminState The value of adminState specifies the administrative state of this NAT address pool.

type=nat.NatAdminState
default=outOfService
Displayed(tab/group)=Administrative State

creationOrigin

type=svt.L2RouteOriginType
access=read-create
default=manual

destPrefix The value of nat64Prefix specifies the IP address of the NAT64 prefix. Outward bound IP packets with a destination IP address that matches the NAT64 prefix are subject to the NAT64 function. The value of this object can only be modified while adminState is equal to 'outOfService'.

type=InetAddress
default=64:FF9B::
Displayed(tab/group)=NAT Destination Prefix

destPrefixLen The value of prefixLen specifies the prefix length of the NAT64 prefix The value can only be modified while the value of adminState is equal to 'outOfService'

type=int
default=96
minimum=32
maximum=96
Displayed(tab/group)=NAT Destination Prefix Length

destPrefixType The Address Type, should always be IPv6

type=rtr.InetAddressType
access=read-create
default=ipv6

valid enums=ipv6 (Where parent is one of (nat.NatConfig))

dropZeroIpv4Checksum Specifies if UDP datagrams with zero IPv4 checksum are dropped. If the value is equal to 'false', the system calculates the IPv6 checksum for each such datagram. The value can only be modified while the adminState is equal to 'outOfService'."

type=boolean
default=false
Displayed(tab/group)=Drop UDP with Zero Checksum

ignoreTos Specifies if the IPv4 Type Of Service (TOS) is ignored and the IPv6 Traffic Class bits set to zero. If the set to 'false', the system copies the IPv4 TOS into the IPv6 Traffic Class. The value ocan only be modified while the adminState is equal to 'outOfService'

type=boolean
default=false
Displayed(tab/group)=Ignore IPv4 ToS and Set IPv6 TC

inFragmentIp Specifies if and when the IPv6 payload datagrams are fragmented before transmission.

type=nat.NatFragmentIpMode
default=disabled
Displayed(tab/group)=IP Fragmentation

insertIpv6Frag Specifies if the system always inserts an IPv6 fragment header, to indicate that the sender allows fragmentation. The value can only be modified while the value of adminState is equal to 'outOfService'."

type=boolean
default=false
Displayed(tab/group)=Insert IPv6 Fragment Header

ipv6Mtu Specifies the Maximum Transmission Unit (MTU) of the IPv6 link. The value can only be modified while the value adminState is equal to 'outOfService'."

type=int
default=1520
minimum=1280
maximum=9212
Displayed(tab/group)=IPv6 MTU

routerId Specifies the Virtual Router Instance

type=int
access=read-only
default=1
minimum=1
maximum=10240

setTos Specifies if the IPv6 Traffic Class is ignored and the IPv4 Type Of Service (TOS) bits set to the value specified by the object tos. If set equal to 'false', the system copies the IPv6 Traffic Class into the IPv4 TOS. The value can only be modified while adminState is equal to 'outOfService'

type=boolean
default=false
Displayed(tab/group)=Ignore IPv6 TC and Set IPv4 ToS

subPrefixLen The value of the object subPrefixLen specifies the IPv6 address prefix length to be used for the NAT64 subscribers in this virtual router instance 32...64|128

type=int
default=128
minimum=32
maximum=128
Displayed(tab/group)=Subscriber Prefix Length

tos Specifies what to put in the IPv4 Type Of Service (TOS) field while the value of setTos is equal to 'true'. The value can only be modified while adminState is equal to 'outOfService'."

type=int
default=0
minimum=0
maximum=255
Displayed(tab/group)=ToS Value

  
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed
 
Supported Network Elements
7750 SR Supported from 10.0.R1 until 12.0.R1
  • Excluded chassis types: 7750-SRc12, 7750-SRc4, 7750-SR1 Fixed CFM, 7750 SR-14s, 7750 SR-7s, 7750 SR-1s, 7750 SR-2s
Supported from 12.0.R1 until 13.0.R8
  • Excluded chassis types: 7750-SRc4, 7750-SRa4, 7750-SRa8, 7750 SR-1e, 7750 SR-2e, 7750 SR-3e, 7750-SR1 Fixed CFM, 7750 SR-14s, 7750 SR-7s, 7750 SR-1s, 7750 SR-2s
Supported from 13.0.R8 until 20.5.R1
  • Excluded chassis types: 7750-SRc4, 7750-SRa4, 7750-SRa8, 7750-SR1 Fixed CFM, 7750 SR-14s, 7750 SR-7s, 7750 SR-1s, 7750 SR-2s
Supported from 20.5.R1
  • Excluded chassis types: 7750-SRa4, 7750-SRa8, 7750 SR-14s
7450 ESS Supported from 11.0.R1
  • Excluded chassis types: 7450-ESS1
  • Required Capabilities: MixedMode
Product Specifics
7450 ESS 20.0
7450 ESS 21.0
7450 ESS 22.0
7450 ESS 23.0
7450 ESS 24.0
7450 ESS 25.0
7750 SR 20.0
7750 SR 21.0
7750 SR 22.0
7750 SR 23.0
7750 SR 24.0
7750 SR 25.0