| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| deterministicPortReservation |
Specifies the number of ports per subscriber, within the port range available for Deterministic NAT.
The value zero means that no ports are available for Deterministic NAT. A nonzero value is only
supported while the pool type is largeScale. The range of ports available for Deterministic NAT
per outside IP address, starts at the value of portFwdRangeEnd end + 1, and the number of
ports is equal to the value of deterministicPortReservation multiplied by the subscriberLimit.
type=int default=0 minimum=0 maximum=65535 Displayed(tab/group)= • nat.NatPool Deterministic NAT Port Reservation |
| exportAddrPrefix |
Specifies the IP address of the prefix to be exported.
While the export prefix is configured and the poll is active, the system exports this prefix
in the realm of the virtual router instance associated with this pool; to the NAT redundancy
peer, the presence of this prefix is an indication that the Large Scale NAT function in this
virtual router instance is active; hence, the export prefix of this system is the monitor
prefix of the peer. The export prefix must be different from the monitor prefix.
type=InetAddress default=0.0.0.0 Displayed(tab/group)= • nat.NatPool Exported Address Prefix (/Redundancy) |
| exportAddrPrefixLen |
The prefix length of the exportAddrPrefix
type=int minimum=0 maximum=32 Displayed(tab/group)= • nat.NatPool Prefix Length (/Redundancy) |
| exportAddrPrefixType |
The IP address type forexportAddrPrefix
type=rtr.InetAddressType default=ipv4 valid enums=ipv4 (Where parent is one of (nat.NatPool)) |
| followPoolPointer |
Fully Descriptive Name (FDN) of the NAT Pool on which the NAT Pool that acts as the dual-homing
leader for this Large Scale NAT address pool is to be performed.
FDN for VPRN routing instance should be:
svc-mgr:service-id:node-system-address:NAT:natpool-name
For example, if VPRN service-id is 212, the node system address is 1.3.1.3,
and the pool name is 'Test', the FDN would be:
svc-mgr:service-212:1.3.1.3:NAT:natpool-Test.
FDN for Base routing instance should be:
network:node-system-address:router-1:NAT:natpool-name
For example, if the node system address is 1.3.1.3 and the pool name is 'Test',
the FDN would be:
network:1.3.1.3:router-1:NAT:natpool-Test
type=Pointer default= Displayed(tab/group)= • nat.NatPool Follow NAT Pool (/Redundancy) |
| isActive |
Is the Large Scale NAT function of the virtual router instance associated with this pool is active.
type=generic.TruthValue access=read-only default=false Displayed(tab/group)= • nat.NatPool Active |
| monitoredPrefix |
Specifies the IP address of the prefix to be monitored. While the monitor prefix is configured,
the system monitors the presence of this prefix in the routing table of the virtual router
instance associated with this pool; the presence of this prefix is an indication that the NAT
redundancy peer is active; the monitor prefix of this system is the export prefix of the peer.
The monitor prefix must be different from the export prefix."
type=InetAddress default=0.0.0.0 Displayed(tab/group)= • nat.NatPool Monitored Address Prefix (/Redundancy) |
| monitoredPrefixLen |
The prefix length of the prefix to be exported
type=int minimum=0 maximum=32 Displayed(tab/group)= • nat.NatPool Prefix Length (/Redundancy) |
| monitoredPrefixType |
The IP address type for monitoredPrefix
type=rtr.InetAddressType default=ipv4 valid enums=ipv4 (Where parent is one of (nat.NatPool)) |
| natPoolName |
The Name of the NAT Pool
type=string access=read-only |
| redundantAdminState |
Specifies the administrative state of the dual-homing of this NAT address pool.
type=nat.NatAdminState default=outOfService Displayed(tab/group)= • nat.NatPool Administrative State (/Redundancy) |
| routerId |
Specifies the Virtual Router Instance
type=int access=read-only |
| siteId |
type=string access=read-only maximum=64 |
| subscriberLimit |
specifies the maximum number of subscribers per outside IP address.
In case multiple port blocks per subscriber are used, the block size is typically small;
all blocks assigned to a given subscriber belong to the same IP address; the subscriber limit
guarantees that any subscriber can get a minimum number of ports.
type=int default=65535 minimum=1 maximum=65535 Displayed(tab/group)= • nat.NatPool Subscriber Limit |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR |
Supported from 10.0.R1 until 12.0.R1
|
| 7705 SAR Gen 2 | |
| 7450 ESS |
Supported from 11.0.R1
|
| Product Specifics | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 (all versions) | |
| 7705 SAR Gen 2 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |