| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| bsrAddress |
Indicates the address of the elected bootstrap router.
type=InetAddress access=read-create default=0.0.0.0 Displayed(tab/group)=BSR Address (BootStrap Router/Elected BootStrap Router) |
| bsrAddressType |
Indicates the type of address of the elected bootstrap router.
type=rtr.InetAddressType access=read-create default=ipv4 |
| bsrCandidateAddress |
It is used to configure the address of the
Candidate Bootstrap Router(CBSR). To participate in the bootstrap
election, the router sends bootstrap messages(BSM). These messages
carry the BSR address of the router.
type=InetAddress default=0.0.0.0 Displayed(tab/group)=CBSR Address (BootStrap Router/Candidate BootStrap Router) |
| bsrCandidateAddressType |
Indicates the address type of the Candidate Bootstrap Router(IPv4, IPV6,...).
type=rtr.InetAddressType access=read-create default=ipv4 |
| bsrCandidateAdminState |
It is used to administratively enable/disable
participating in the Bootstrap election. Note that even if
the value of the object is set to 'inService', if the
vRtrPimGenCBSRAddress is not set or vRtrPimGenCBSRPriority is zero,
bootstrap messages will not be sent.
type=netw.AdministrativeState access=read-only default=pimDown Displayed(tab/group)=CBSR Admin State (BootStrap Router/Candidate BootStrap Router) |
| bsrCandidateHashMaskLength |
It is used to configure the length of
a mask that is to be ANDed with the group address before
the hash function is called. All groups with the same hash
map to the same RP. For example, if this value is 24, only the first
24 bits of the group addresses matter. This mechanism is used to
map one group or multiple groups to a RP.
type=int default=30 minimum=0 maximum=32 Displayed(tab/group)=CBSR Hash Mask Length (BootStrap Router/Candidate BootStrap Router) |
| bsrCandidateOperState |
It indicates the operational status of the
Bootstrap mechanism. If the BSR operational state is 'outOfService',
it could be because the router interface corresponding to
vRtrPimGenCBSRAddress is down or PIM is not enabled on that interface
or vRtrPimGenCBSRPriority is zero.
type=netw.OperationalState access=read-only default=pimUp Displayed(tab/group)=CBSR Operational State (BootStrap Router/Candidate BootStrap Router) |
| bsrCandidatePriority |
Indicates whether the router is eligible
to be a bootstrap router. If the value of this object is set to zero,
the router does not participate in the bootstrap election. The
highest priority is 255.
type=int access=read-only default=0 minimum=0 maximum=255 Displayed(tab/group)=CBSR Priority (BootStrap Router/Candidate BootStrap Router) |
| bsrExpiryTime |
If vRtrPimGenBSRState is not 'electedBSR', vRtrPimGenBSRExpiryTime
indicates the minimum time remaining before the elected bootstrap
router will be declared down.
If vRtrPimGenBSRState is 'electedBSR', vRtrPimGenBSRExpiryTime
indicates the time remaining before the router sends the next
Bootstrap Message(BSM).
type=long access=read-only units=seconds Displayed(tab/group)=BSR Expiry Time (BootStrap Router/Elected BootStrap Router) |
| bsrHashMaskLength |
Indicates the hash mask length of the the elected BSR.
type=int access=read-only Displayed(tab/group)=BSR Hash Mask Length (BootStrap Router/Elected BootStrap Router) |
| bsrPriority |
Indicates the priority of the elected bootstrap
router. Higher value means higher priority.
type=int access=read-only Displayed(tab/group)=BSR Priority (BootStrap Router/Elected BootStrap Router) |
| bsrRpfIfIndex |
It indicates the RPF interface towards
the elected BSR. The value of this object will be zero if there
is no elected BSR in the network.
type=int access=read-only Displayed(tab/group)=BSR RPF Index (BootStrap Router/Elected BootStrap Router) |
| bsrRpfInterfaceName |
It indicates the name of RPF interface towards
the elected BSR. The value of this object will be zero if there
is no elected BSR in the network.
type=string access=read-only default= maximum=252 Displayed(tab/group)=BSR RPF Interface (BootStrap Router/Elected BootStrap Router) |
| bsrState |
Indicates the state of the router with respect to
the bootstrap mechanism.
'candidateBSR', 'pendingBSR' and 'electedBSR' are the states of the
router participating in the Bootstrap election.
'acceptAny' and 'acceptPreferred' are the states of the router
not participating in the Bootstrap election.
type=pim.BSRState access=read-only Displayed(tab/group)=BSR State (BootStrap Router/BootStrap Router) |
| bsrUpTime |
Indicates the time since the current E-BSR became the elected BSR.
type=Time access=read-only Displayed(tab/group)=BSR Up Time (BootStrap Router/Elected BootStrap Router) |
| siteId |
Represents the Pim Site Id.
type=InetAddress access=read-create default=0.0.0.0 Displayed(tab/group)=PIM Site (BootStrap Router/Candidate BootStrap Router) |
| siteIdAddrType |
type=rtr.InetAddressType access=read-create default=ipv4 |
| Properties inherited from multicastmgr.MCContainedObject |
|---|
| nwId, serviceId, vRtrId |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR | |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7450 ESS |
Supported from 8.0.R1 until 10.0.R1
|
| DC VSC | |
| DC 7850 | |
| DC 210 | |
| DC VSA8 | |
| 7950 XRS | |