| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| destinationIpAddr |
Specifies the IPv4 address to be used as the destination for
performing the Mtrace test. The multicast trace query is sent to
this destination address. If this object is not set, the multicast
trace starts from this router.
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Destination Address (/Test Response Destination) |
| destinationIpAddrType |
Specifies the address type of the destinationIpAddr.
type=rtr.InetAddressType access=read-only default=ipv4 |
| groupMcastAddr |
type=InetAddress access=read-only default=0.0.0.0 |
| groupMcastAddrType |
Specifies the address type of the groupMcastAddr.
type=rtr.InetAddressType access=read-only default=ipv4 |
| groupPointer |
The network element that is the origin of the test.
type=Pointer access=read-create default= Mandatory on create Displayed(tab/group)=Multicast Group (/Multicast Group) |
| hopCount |
Specify the maximum number of hops that will be traced
along the path to the source.
type=int default=5 minimum=1 maximum=255 Displayed(tab/group)=Number of Hops (Test Parameters/Test Probe) |
| initialTimeToLive |
Specifies the initial outermost label time-to-live value.
This enables bypassing the initial (often well known)
portion of a path.
type=int default=1 minimum=1 maximum=255 |
| maxTimeToLive |
Specifies the maximum outermost label time-to-live value.
type=int default=4 minimum=1 maximum=255 |
| originatingNode |
The network element that is the origin of the test.
type=string access=read-only maximum=50 |
| originatingPointer |
type=Pointer access=read-create default= Mandatory on create Displayed(tab/group)=On Node (/Test Target) |
| responseIpAddr |
Specify the Ipv4 address to be used as the response
address for performing an OAM 'mcastTraceRoute'
operation. If this object is not set, then the
system ip address is used as the response address.
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Response Address (/Test Response Destination) |
| responseIpAddrType |
Specifies the address type of the responseIpAddr.
type=rtr.InetAddressType access=read-only default=ipv4 |
| sourceMcastAddr |
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Source (/Multicast Group) |
| sourceMcastAddrType |
Specifies the address type of the sourceMcastAddr.
type=rtr.InetAddressType access=read-only default=ipv4 |
| testTargetType |
Specifies the target type of the mtrace test. The
target may either be an Core Routing Instance, or VPRN Site.
type=sas.TestTarget default=coreSite Displayed(tab/group)=Target Type (/Test Target) |
| virtualRouterId |
The unique value which identifies this virtual router in the
7x50 SR system. The vRtrID value for each virtual router
must remain constant at least from one re-initialization of the
system management processor (CPM) to the next. There will always
be at least one router entry defined by the agent with vRtrID=1
which represents the base transport router.
If no value is specified the base router ID is used.
type=long default=1 minimum=1 maximum=10240 |
| Properties inherited from sas.Trace |
|---|
| assurance, maxFailures, maxHistoryRows, packetInterval, packetSize, packetTimeout, packetsToSend, testType, trapGenerationPolicy |
| Properties inherited from sas.AbstractTest |
|---|
| administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from sas.Test |
|---|
| adhocExecuteAndWait, executeAndWait, setNeSchedulableAdminState |
| Methods inherited from sas.AbstractTest |
|---|
| execute, stop |