| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| destinationIpAddr |
Specifies the IPv4 address to be used as the destination for
performing the Mtrace test. The multicast trace query is sent to
this destination address. If this object is not set, the multicast
trace starts from this router.
type=InetAddress access=read-only Displayed(tab/group)=Destination Address (/Test Response Destination) |
| destinationIpAddrType |
Specifies the address type of the destinationIpAddr.
type=rtr.InetAddressType access=read-only |
| groupMcastAddr |
type=InetAddress access=read-only |
| groupMcastAddrType |
Specifies the address type of the groupMcastAddr.
type=rtr.InetAddressType access=read-only |
| groupPointer |
The network element that is the origin of the test.
type=Pointer access=read-only Displayed(tab/group)=Multicast Group (/Multicast Group) |
| hopCount |
Specify the maximum number of hops that will be traced
along the path to the source.
type=int access=read-only Displayed(tab/group)=Number of Hops (Test Parameters/Test Probe) |
| initialTimeToLive |
Specifies the initial outermost label time-to-live value.
This enables bypassing the initial (often well known)
portion of a path.
type=int access=read-only |
| maxTimeToLive |
Specifies the maximum outermost label time-to-live value.
type=int access=read-only |
| originatingNode |
The network element that is the origin of the test.
type=string access=read-only maximum=50 |
| originatingPointer |
type=Pointer access=read-only Displayed(tab/group)=On Node (/Test Target) |
| responseIpAddr |
Specify the Ipv4 address to be used as the response
address for performing an OAM 'mcastTraceRoute'
operation. If this object is not set, then the
system ip address is used as the response address.
type=InetAddress access=read-only Displayed(tab/group)=Response Address (/Test Response Destination) |
| responseIpAddrType |
Specifies the address type of the responseIpAddr.
type=rtr.InetAddressType access=read-only |
| sourceMcastAddr |
type=InetAddress access=read-only Displayed(tab/group)=Source (/Multicast Group) |
| sourceMcastAddrType |
Specifies the address type of the sourceMcastAddr.
type=rtr.InetAddressType access=read-only |
| testTargetType |
Specifies the target type of the mtrace test. The
target may either be an Core Routing Instance, or VPRN Site.
type=sas.TestTarget access=read-only Displayed(tab/group)=Target Type (/Test Target) |
| virtualRouterId |
The unique value which identifies this virtual router in the
7x50 SR system. The vRtrID value for each virtual router
must remain constant at least from one re-initialization of the
system management processor (CPM) to the next. There will always
be at least one router entry defined by the agent with vRtrID=1
which represents the base transport router.
If no value is specified the base router ID is used.
type=long access=read-only |
| Overridden Properties | |
|---|---|
| id | The identifier for the STM test. |
| Properties inherited from sas.ArchivedTrace |
|---|
| assurance, id, maxFailures, maxHistoryRows, packetInterval, packetSize, packetTimeout, packetsToSend, trapGenerationPolicy |
| Properties inherited from sas.AbstractTest |
|---|
| administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from sas.AbstractTest |
|---|
| execute, stop |