| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| admissionControl |
Admission Control on MPR node
type=mpr.AdmissionControlState default=enabled Displayed(tab/group)=Admission Control (/Network Element Configuration) |
| aisInsertionLofDetection |
Specifies the AIS Insertion LOF Detection state
type=mpr.AisInsertionType default=disabled Displayed(tab/group)=Ais Insertion LOF Detection (/Network Element Configuration) |
| bridgeAddress |
Specifies the bridge Mac address
type=MacAddress access=read-only default=00-00-00-00-00-00 Displayed(tab/group)=MAC Address (/Network Element Configuration) |
| bridgeType |
specifies the bridge type used for the node
type=int default=1 Displayed(tab/group)=Bridge Type (/Network Element Configuration) enums= 1: macAddressBridge - 802.1D 2: virtualBridge - 802.1Q 3: virtualBridge8021ad - 802.1AD |
| dhcpServer |
status of the dhcp for MPR
type=int default=disabled Displayed(tab/group)=DHCP Server (/Network Element Configuration) enums= 1: enabled - Enabled 2: disabled - Disabled |
| ethLOSCriteria |
specifies if the Ethernet Loss of signal is enabled or not for the node
type=int default=1 Displayed(tab/group)=Ethernet LOS Criteria (/Network Element Configuration) enums= 0: enabled - Enabled 1: disabled - Disabled |
| ethernetStatsAggregateMode |
Reports if the Ethernet counters on the L1 LAG include or not the Ethernet traffic frames (associated to queues 9..12)
type=int access=read-only default=ethernetAndTDM Displayed(tab/group)=Ethernet Stats Aggregate Mode (/Aggregation Type) enums= 0: ethernetAndTDM - Ethernet And TDM 1: ethernet - Ethernet |
| eventAlarmLogging |
specifies if the event logging is enabled or not
type=int default=1 Displayed(tab/group)=Event and Alarm Log (/Network Element Configuration) enums= 1: enabled - Enabled 0: disabled - Disabled |
| eventAlarmLoggingIndex |
Specifies if the event logging is enabled
type=int default=1 |
| httpsStatus |
Used to enable/disable HTTPS service for remote and local access, the default value is enabled.
type=int default=enable Displayed(tab/group)=HTTPS Protocol (/Network Element Configuration) enums= 1: enable - Enabled 2: disable - Disabled |
| initialUserPasswordReset |
type=int default=false Displayed(tab/group)=WebCT Initial User Password Reset (/Network Element Configuration) enums= 1: true - True 2: false - False |
| l3VlanId |
IPDP VLAN ID
type=int default=0 minimum=0 maximum=4080 Displayed(tab/group)=L3 VLAN Id (/IP Data Plane Settings) |
| lacIndex |
type=long access=read-only default=1 |
| lacState |
Reflects the LAC status on the node.
type=mpr.LacState default=accessGranted Displayed(tab/group)=Lac state (/LAC Configuration) |
| lacTimeOut |
Specifies the LAC timeout on the node.
type=int minimum=0 maximum=3600 units=sec Displayed(tab/group)=LAC Timeout (/LAC Configuration) |
| mgmtProtocolsCapability |
Specifies the enabled protocols for the node like SSH, FTP, Telnet,etc.
type=mpr.ManagementProtocolsType access=read-only Displayed(tab/group)=Supported Protocols (/Network Element Configuration) |
| neSecurityMode |
Specifies the security mode for SNMP ie. SNMPv2/SNMPv3
type=mpr.NESecurityModeType access=read-only default=unsecure Displayed(tab/group)=SNMP Mode (/Network Element Configuration) |
| physicalImpedance |
Specifies the physical impedance value
type=int default=balance Displayed(tab/group)=Physical Impedance (/Network Element Configuration) enums= 1: balance - Balance 120 Ohm 2: unbalance - Unbalance 75 Ohm |
| radioSerialNo |
Specifies the radio serial number.
type=string access=read-only Displayed(tab/group)=Serial No (/Network Element Configuration) |
| siteId |
Specifies the SiteId of the node
type=string Displayed(tab/group)=Site Id (/Network Element Configuration) |
| staticLagCriteria |
Specifies if static lag is enabled or not for the node
type=int default=1 Displayed(tab/group)=Static Lag Criteria (/Network Element Configuration) enums= 0: enabled - Enabled 1: disabled - Disabled |
| swLicenseNewVer |
Specifies the software New version
type=string access=read-only default= Displayed(tab/group)=SW License (/Network Element Configuration) |
| swLicenseOldVer |
Specifies the software old version
type=string access=read-only default= |
| systemLagPriority |
Specifies the system priority for LAG
type=long default=0 maximum=65535 Displayed(tab/group)=System Priority (/Network Element Configuration) |
| tacacsAuthentication |
type=mpr.TacacsAuthenticationType access=read-only default=0 Displayed(tab/group)=TACACS Authentication (/TACACS Plus) |
| tacacsLastServerUsed |
type=int access=read-only Displayed(tab/group)=Last TACACS Server Used (/TACACS Plus) |
| vRtrRouterId |
type=string default=0.0.0.0 maximum=50 Displayed(tab/group)=Base Virtual Router Ip Address (/IP Data Plane Settings) |
| vlanGroup |
Specifies the Vlan Group name if the node belongs to one.
type=string Displayed(tab/group)=Vlan Group (/Network Element Configuration) |
| wredAdminState |
type=int default=disable Displayed(tab/group)=Wred Status (/Network Element Configuration) enums= 1: enable - Enable 2: disable - Disable |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| Wavence SM | |
| Product Specifics | |
| Wavence SM 19A.0.0 | |
| Wavence SM 20A.0.0 | |
| Wavence SM 21A.0.0 | |
| Wavence SM 22.0.0 | |
| Wavence SM 22A.0.0 | |
| Wavence SM 23.0.0 | |
| Wavence SM 23A.0.0 | |
| Wavence SM 24.0.0 | |
| Wavence SM 25.0.0 | |