| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| administrativeState |
The value specifies the administrative state of the hop.
type=netw.AdministrativeState default=mplsXcUp Displayed(tab/group)=Administrative State (/States) |
| egressInterfaceId |
The value specifies the egress interface. Read only and is updated by the router.
type=long access=read-only default=0 |
| egressLabel |
Valid range is 16-1048575 or 0 (if not applicable)
type=long default=0 minimum=0 maximum=1048575 Displayed(tab/group)=Egress Label (/Egress) |
| egressLabelProtectSwap |
The Egress Label parameter specifies the static hop egress label when protection is in effect.
This parameter is configurable only when the Label Action parameter value is Swap/Protect-Swap.
type=long default=0 minimum=0 maximum=1048575 Displayed(tab/group)=Egress Label (/Egress Protect-Swap) |
| hopId |
Hop Id is an internal Id assigned to the hop
type=long access=read-create default=0 minimum=1 maximum=1024 |
| implicitNullLabel |
The value of this property specifies whether or not to signal implicit null values.
type=boolean default=false Displayed(tab/group)=Enable Implicit Null Label (/Egress) |
| index |
The Hop Index parameter specifies the position of the hop in the ordered hop list. The range is
1 to 1024. There is no default. The value is incremented for each new hop.
type=int default=1 minimum=1 maximum=1024 Displayed(tab/group)=Hop Index |
| ingressLabel |
The Ingress Label parameter specifies the value of the static hop ingress label.
type=long access=read-create default=0 minimum=32 maximum=262143 Displayed(tab/group)=Ingress Label (/Ingress) |
| interfacePointer |
The value specifies an existing MPLS interface on the selected node
type=Pointer access=read-create default= Mandatory on create Displayed(tab/group)=Interface |
| labelAction |
The Label Action parameter specifies how the static hop treats a received label. The parameter
options are as follows:
unspecified (displayed default)- The option is not selectable.
Pop - The site specified by the Site ID parameter is the last hop; the NE removes the label. The
Ingress Label value must match the Egress Label value of the previous hop.
Swap - The site specified by the Site ID parameter is an intermediate hop. The Ingress Label
value must match the Egress label value of the previous hop. The Egress Label value must match
the Ingress Label value of the next hop.
Swap/Protect-Swap - The FRR support defines an alternate static swap label-map to use if the
next-hop segment goes down. The Site ID is used to specify the node on which the LSP will be
created. The Interface name specifies the MPLS interface to use to forward the MPLS packets.The
Egress label under the Egress group specifies the value with which the ingress label is replaced
and the packet is forwarded to the destination specified by the next-hop. Similarly the Egress
label under the Egress Protect-Swap group specifies an alternate value with which the ingress
label is replaced and the packet is forwarded to the destination specified by next-hop if the
primary route (defined under Egress Group) fails.
type=int access=read-create default=unspecified Displayed(tab/group)=Label Action (/Label Action) enums= 2: pop - Pop 3: swap - Swap 4: protect_swap - Swap/Protect-Swap |
| nextHopAddr |
The Next Hop parameter specifies the IP address of the next hop in dotted-decimal format. There
is no default.
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Next Hop (/Egress) |
| nextHopAddrProtectSwap |
The Next Hop parameter specifies the IP address of the next hop in dotted-decimal format, when
protection is in effect. The default is 0.0.0.0. This parameter is configurable only when the
Label Action parameter value is Swap/Protect-Swap.
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Next Hop (/Egress Protect-Swap) |
| nextHopAddrType |
type=rtr.InetAddressType access=read-only default=ipv4 valid enums=ipv4 (Where parent is one of (mpls.StaticLsp)) |
| operationalState |
The value specifies the operational state of the hop. Read only and is updated by the router.
type=netw.OperationalState access=read-only default=unspecified Displayed(tab/group)=Operational State (/States) |
| sitePointer |
The value specifies an MPLS site
type=Pointer access=read-create default= Mandatory on create Displayed(tab/group)=Site |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7450 ESS | |
| 7210 SAS M |
Supported for all versions
|
| 7210 SAS T |
Supported for all versions
|
| 7210 SAS K |
Supported for all versions
|
| 7210 SAS Mxp |
Supported for all versions
|
| 7210 SAS S/Sx | |
| 7210 SAS X | |
| 7210 SAS R | |
| 7250 IXR | |
| 7750 SR | |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7705 SAR | |
| 7705 SAR H | |
| OS9700E/9800E | |
| DC VSC | |
| DC 7850 | |
| DC 210 | |
| DC VSA8 | |
| 7950 XRS | |
| Wavence SM | |
| Product Specifics | |
| OS9700E/9800E 6.4.3 | |
| OS9700E/9800E 6.4.4 | |
| OS9700E/9800E 6.4.5 | |
| OS9700E/9800E 6.4.6 | |