| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| adaptive |
The Make before Break parameter specifies the traffic rerouting method when you move traffic between primary and secondary LSP paths. The make-before-break functionality ensures that the transition to the new path does not cause any traffic disruption.
For example, when the parameters of an already-established LSP are changed due to a user configuration modification, when the parameter is set to true the resources of the existing LSP are not released until a new path with the same LSP ID is established and passing the traffic seamlessly handed over from the old LSP.
When enabled for the LSP path, the make-before-break functionality is implemented for this LSP path.
type=boolean access=read-only default=true Displayed(tab/group)=Make before Break (/Make before Break (resync may be required to refresh the MBB values)) |
| bypassTunnelActive |
Indicates whether at least one bypass tunnel is active on this path.
type=boolean access=read-only default=false Displayed(tab/group)=Bypass Tunnel Active (/States) |
| computedHopIndex |
type=long access=read-only default=0 minimum=0 maximum=2147483647 |
| destinationAddress |
type=InetAddress access=read-create default=0.0.0.0 Displayed(tab/group)=Destination Site ID |
| destinationAddressType |
type=rtr.InetAddressType access=read-create default=ipv4 |
| egressInterfaceId |
Indicates the egress interface id on the source node
type=long access=read-only default=0 Displayed(tab/group)=Ingress Interface ID (/Source) |
| egressInterfaceName |
Indicates the egress interface name on the source node
type=string access=read-only default=N/A maximum=252 Displayed(tab/group)=Ingress Interface Name (/Source) |
| egressLabel |
Indicates the egress label on the source node
type=long access=read-only default=0 minimum=0 maximum=4294967295 Displayed(tab/group)=Ingress Label (/Source) |
| failCode |
type=mpls.LspPathFailCode access=read-only default=noError Displayed(tab/group)=Failure Code (/States) |
| failedNodeIpAddress |
type=InetAddress access=read-only default=0.0.0.0 Displayed(tab/group)=Failed Site ID (/States) |
| failedNodeIpAddressType |
Indicates the type of failedNodeIpAddress.
type=rtr.InetAddressType access=read-only default=ipv4 |
| groupId |
Indicates the value which identifies the group for this entry.
type=long access=read-only default=0 Displayed(tab/group)=Group ID |
| holdPriority |
DEPRECATED: 8.0.R5 - Not implemented type=int access=read-only default=0 minimum=0 maximum=7 |
| ingressInterfaceId |
Indicates the ingress interface id on the destination node
type=long access=read-only default=0 Displayed(tab/group)=Egress Interface ID (/Destination) |
| ingressInterfaceName |
Indicates the ingress interface name on the destination node
type=string access=read-only default=N/A maximum=252 Displayed(tab/group)=Egress Interface Name (/Destination) |
| ingressLSRId |
type=long access=read-only default=1 minimum=1 maximum=1 |
| ingressLabel |
Indicates the ingress label on the destination node
type=long access=read-only default=0 Displayed(tab/group)=Egress Label (/Destination) |
| instanceId |
type=long access=read-only default=0 |
| isInterArea |
This value indicates whether the LSP path is either inter-area or intra-area.
type=boolean access=read-only default=false Displayed(tab/group)=Inter-Area |
| lastMBBEnd |
Indicates the sysUpTime of the node when the last MBB ended.
type=Date access=read-only Displayed(tab/group)=Last Performed (/Make before Break (resync may be required to refresh the MBB values)) |
| lastMBBMetric |
Indicates the cost of the traffic engineered path for the S2L sub LSP prior to MBB.
type=long access=read-only default=0 Displayed(tab/group)=Last Performed Metric (/Make before Break (resync may be required to refresh the MBB values)) |
| lastMBBState |
Specifies whether the last Make-before-break was successful or failed.
type=int access=read-only default=none Displayed(tab/group)=Last Performed State (/Make before Break (resync may be required to refresh the MBB values)) enums= 1: none 2: success 3: fail |
| lastMBBType |
Indicates the type of last Make-before-break (MBB). If 'none', then no MBB has been attempted.
type=mpls.MBBType access=read-only default=none Displayed(tab/group)=Last Performed Type (/Make before Break (resync may be required to refresh the MBB values)) |
| lspId |
type=long access=read-only default=0 Displayed(tab/group)=LSP ID |
| mbbFailCode |
Specifies the reason code for in-progress MBB failure. A value of 'none' indicates that no
failure has occurred.
type=mpls.LspPathFailCode access=read-only default=noError Displayed(tab/group)=In Progress MBB Failure Code (/Make before Break (resync may be required to refresh the MBB values)) |
| mbbFailNodeAddr |
Specifies the IP address of the node in the S2L sub LSP at which the in-progress MBB failed.
When no failure has occurred, this value is '0.0.0.0'.
type=InetAddress access=read-only default=0.0.0.0 Displayed(tab/group)=In Progress MBB Failed Node (/Make before Break (resync may be required to refresh the MBB values)) |
| mbbFailNodeArType |
Indicates the type of mbbFailNodeAddr.
type=rtr.InetAddressType access=read-only default=ipv4 |
| mbbNextRetry |
Indicates the amount of time remaining in seconds before the next attempt is made to retry the
in-progress MBB.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=In Progress MBB Next Retry (/Make before Break (resync may be required to refresh the MBB values)) |
| mbbRetryAttempts |
Indicates 'n' where nth attempt for the MBB is in progress.
type=int access=read-only default=0 Displayed(tab/group)=In Progress MBB Retry Attempts (/Make before Break (resync may be required to refresh the MBB values)) |
| mbbStarted |
Indicates the sysUpTime of the node when the in-progress MBB started.
type=Date access=read-only Displayed(tab/group)=In Progress MBB Started (/Make before Break (resync may be required to refresh the MBB values)) |
| mbbTypeInProg |
Indicates the type of the Make-before-break (MBB) that is in progress. If 'none', then no MBB is
in progress.
type=mpls.MBBType access=read-only default=none Displayed(tab/group)=In Progress MBB Type (/Make before Break (resync may be required to refresh the MBB values)) |
| metric |
Indicates the cost of the traffic engineered path returned by the IGP.
type=long access=read-only default=0 Displayed(tab/group)=Metric (/CSPF) |
| negotiatedMtu |
type=int access=read-only default=0 units=MTU Displayed(tab/group)=Maximum Transmitted Frame Size (/Transport Properties) |
| operationalBandwidth |
type=int access=read-only default=0 units=Mbps Displayed(tab/group)=Operational Bandwidth (/Traffic Engineering Properties) |
| operationalMTU |
type=long access=read-only default=0 units=MTU Displayed(tab/group)=Operational Maximum Transmitted Frame Size (/Transport Properties) |
| properties |
type=mpls.LspPathProperties access=read-only default=0 |
| s2LPathMonitor |
Pointer to the P2MP LSP S2L path monitor which is used to monitor
and record changes to this S2L path.
type=Pointer access=read-only default= |
| setupPriority |
DEPRECATED: 8.0.R5 - Not implemented type=int access=read-only default=7 minimum=0 maximum=7 |
| signalledPathId |
type=long access=read-only default=0 |
| status |
type=mpls.LspPathState access=read-only default=unknown Displayed(tab/group)=Status |
| templateVersionPointer |
Pointer to the template if this object was created from a template.
type=Pointer default= Displayed(tab/group)=Associated Template (Template/Associated Template) |
| tunnelInstance |
type=int access=read-only default=1 minimum=1 maximum=1 |
| type |
type=mpls.S2LPathType access=read-only default=s2lPath Displayed(tab/group)=Type |
| virtualRouterId |
type=int access=read-only default=1 minimum=1 maximum=1 |
| Properties inherited from netw.SncConnection |
|---|
| resourceId, resourceName, resourcePointer |
| Properties inherited from netw.PointToPointSubnetworkConnection |
|---|
| fromCtp, fromNodeId, fromNodeName, toCtp, toNodeId, toNodeName |
| Properties inherited from netw.SubnetworkConnection |
|---|
| domain |
| Properties inherited from netw.Connection |
|---|
| administrativeState, application, connectionId, operationalState |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |