| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| downMapTlv |
Specifies the type of downstream mapping TLV in an MPLS echo request PDU
or no downstream mapping TLV.
'dsmap(1)' specifies the Downstream Mapping TLV
'ddmap(2)' specifies the Downstream Detailed Mapping TLV
'none(3)' specifies none of the above TLVs.
type=sas.OamMplsEchoDownMapTlvType default=dsmap Displayed(tab/group)=DownStream TLV (Test Parameters/DownStream TLV) |
| forwardingClass |
Specifies the forwarding class the LSP trace will use.
type=qos.FcEnum default=be Displayed(tab/group)=Forwarding Class (Test Parameters/Test Probe) |
| ldp |
The LSP to test. May only be specified when
testTargetType is lsp or lspPath.
type=Pointer access=read-create default= Mandatory on create Displayed(tab/group)=LDP Site (/Test Object) |
| ldpPrefix |
Specifies the address prefix of the destination node
for a testTargetType of router. May only be specified
when testTargetType is ldpPrefix.
type=InetAddress default=0.0.0.0 Displayed(tab/group)=LDP Prefix (/Test Object) |
| ldpPrefixType |
Specifies the address type for the ldpPrefix.
type=rtr.InetAddressType access=read-only default=ipv4 valid enums=ipv4 (Where parent is one of (sas.NeAgent)) |
| maxPath |
Specifies the maximum number of paths that can be discovered
for the given LDP Prefix ldpPrefix).
type=int default=128 minimum=1 maximum=255 Displayed(tab/group)=Maximum Paths (Test Parameters/Test Probe) |
| maxTimeToLive |
Specifies the maximum outermost label time-to-live value.
type=int default=30 minimum=1 maximum=255 Displayed(tab/group)=Maximum Time To Live (Test Parameters/Test Probe) |
| prefixLen |
Specifies the Internet address prefix length for the LDP based LSP
for this OAM LDP Tree discovery test. The value of this parameter
is valid only when LDP IP Prefix has been specified.
Denotes the length of a generic Internet network address prefix.
A value of n corresponds to an IP address mask that has n contiguous
1-bits from the most significant bit (MSB), with all other bits set to 0.
This value is always interpreted within the context of an fecPrefixType value.
Every usage of the InetAddressPrefixLength textual convention is required to
specify the InetAddressType object that provides the
context. It is suggested that the InetAddressType object be
logically registered before the object(s) that use the
InetAddressPrefixLength textual convention, if they appear
in the same logical row.
InetAddressPrefixLength values larger than
the maximum length of an IP address for a specific
InetAddressType are treated as the maximum significant
value applicable for the InetAddressType. The maximum
significant value is 32 for the InetAddressType
'ipv4(1)' and 'ipv4z(3)' and 128 for the InetAddressType
'ipv6(2)' and 'ipv6z(4)'. The maximum significant value
for the InetAddressType 'dns(16)' is 0.
The value zero is object-specific and must be defined as
part of the description of any object that uses this
syntax. Examples of the usage of zero might include
situations where the Internet network address prefix
is unknown or does not apply.
The upper bound of the prefix length has been chosen to
be consistent with the maximum size of an InetAddress."
type=int access=read-only default=32 minimum=0 maximum=128 Displayed(tab/group)=LDP Prefix Length (/Test Object) |
| profile |
Specifies the profile value to be used with the
forwarding class specified in forwardingClass.
type=qos.Profile default=out Displayed(tab/group)=Profile (Test Parameters/Test Probe) |
| retryCount |
Specifies the maximum number of consecutive timeouts allowed before
failing a path probe (ping).
type=int default=3 minimum=1 maximum=255 Displayed(tab/group)=Retry Counter (Test Parameters/Test Probe) |
| timeOut |
Specifies the specifies the time-out value, in seconds,
for an lsp trace request during the tree discovery.
type=int default=30 minimum=1 maximum=60 units=Seconds Displayed(tab/group)=Timeout (Test Parameters/Test Probe) |
| Properties inherited from sas.Trace |
|---|
| assurance, maxFailures, maxHistoryRows, packetInterval, packetSize, packetTimeout, packetsToSend, testType, trapGenerationPolicy |
| Properties inherited from sas.AbstractTest |
|---|
| administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from sas.Test |
|---|
| adhocExecuteAndWait, executeAndWait, setNeSchedulableAdminState |
| Methods inherited from sas.AbstractTest |
|---|
| execute, stop |