|
Properties |
|
cakInfoMissing |
Indicates the number of times internal CAK data is not available for the generation of the SAK.
type=UInt128
access=read-only
default=0
|
|
cakInfoMissingPeriodic |
Indicates the number of times internal CAK data is not available for the generation of the SAK.
type=UInt128
access=read-only
default=0
|
|
cknNotFound |
>
Indicates the number of MKPDUs received with a CKN that does not match the CA configured for the port.
type=UInt128
access=read-only
default=0
|
|
cknNotFoundPeriodic |
>
Indicates the number of MKPDUs received with a CKN that does not match the CA configured for the port.
type=UInt128
access=read-only
default=0
|
|
icvCheckFailed |
Indicates the number of MKPDUs received which contain an Integrity Check Value (ICV) value
that does not authenticate.
type=UInt128
access=read-only
default=0
|
|
icvCheckFailedPeriodic |
Indicates the number of MKPDUs received which contain an Integrity Check Value (ICV) value
that does not authenticate.
type=UInt128
access=read-only
default=0
|
|
invalidCakNameLength |
Indicates the number of MKPDUs received which contain a CAK name that exceeds the maximum
CAK name length.
type=UInt128
access=read-only
default=0
|
|
invalidCakNameLengthPeriodic |
Indicates the number of MKPDUs received which contain a CAK name that exceeds the maximum
CAK name length.
type=UInt128
access=read-only
default=0
|
|
keyNumberInvalid |
Indicates the number of SAKs received with an invalid Key Number.
type=UInt128
access=read-only
default=0
|
|
keyNumberInvalidPeriodic |
Indicates the number of SAKs received with an invalid Key Number.
type=UInt128
access=read-only
default=0
|
|
latestSakLowestPktNumber |
Indicates the Lowest Acceptable Packet Number of the latest SAK.
type=UInt128
access=read-only
default=0
|
|
latestSakLowestPktNumberPeriodic |
Indicates the Lowest Acceptable Packet Number of the latest SAK.
type=UInt128
access=read-only
default=0
|
|
maxPeersSetAsZero |
Indicates the number of Secy SAK installations that have failed due to the max peer entry being
set to 0.
type=UInt128
access=read-only
default=0
|
|
maxPeersSetAsZeroPeriodic |
Indicates the number of Secy SAK installations that have failed due to the max peer entry being
set to 0.
type=UInt128
access=read-only
default=0
|
|
newLivePeers |
>
Indicates the number of validated peers that have been added to the live peer list.
type=UInt128
access=read-only
default=0
|
|
newLivePeersPeriodic |
>
Indicates the number of validated peers that have been added to the live peer list.
type=UInt128
access=read-only
default=0
|
|
paramSetNotQuadSize |
Indicates the number of MKPDUs received which contain a parameter set that is not a multiple
of 4 octets long.
type=UInt128
access=read-only
default=0
|
|
paramSetNotQuadSizePeriodic |
Indicates the number of MKPDUs received which contain a parameter set that is not a multiple
of 4 octets long.
type=UInt128
access=read-only
default=0
|
|
pduLivenessCheckFail |
>
Indicates the number of MKPDUs received which contain an MN that is not acceptably recent.
type=UInt128
access=read-only
default=0
|
|
pduLivenessCheckFailPeriodic |
>
Indicates the number of MKPDUs received which contain an MN that is not acceptably recent.
type=UInt128
access=read-only
default=0
|
|
pduMessageNumberInvalid |
>
Indicates the number of MKPDUs received out of order as indicated by the Message Number.
type=UInt128
access=read-only
default=0
|
|
pduMessageNumberInvalidPeriodic |
>
Indicates the number of MKPDUs received out of order as indicated by the Message Number.
type=UInt128
access=read-only
default=0
|
|
pduNotQuadSize |
>
Indicates the number of MKPDUs received with a size that is not a multiple of 4 octets long.
type=UInt128
access=read-only
default=0
|
|
pduNotQuadSizePeriodic |
>
Indicates the number of MKPDUs received with a size that is not a multiple of 4 octets long.
type=UInt128
access=read-only
default=0
|
|
pduParamSetSizeInvalid |
>
Indicates the number of MKPDUs received which contain a parameter set body length that exceeds
the remaining length of the MKPDU.
type=UInt128
access=read-only
default=0
|
|
pduParamSetSizeInvalidPeriodic |
>
Indicates the number of MKPDUs received which contain a parameter set body length that exceeds
the remaining length of the MKPDU.
type=UInt128
access=read-only
default=0
|
|
pduTooBig |
>
Indicates the number of MKPDUs received where the EAPOL header Indicates a size larger than the
received packet.
type=UInt128
access=read-only
default=0
|
|
pduTooBigPeriodic |
>
Indicates the number of MKPDUs received where the EAPOL header Indicates a size larger than the
received packet.
type=UInt128
access=read-only
default=0
|
|
pduTooSmall |
>
Indicates the number of MKPDUs received that are less than 32 octets.
type=UInt128
access=read-only
default=0
|
|
pduTooSmallPeriodic |
>
Indicates the number of MKPDUs received that are less than 32 octets.
type=UInt128
access=read-only
default=0
|
|
peerRemovedDueToTimeout |
>
Indicates the number of peers removed from the live/potential peer list due to not receiving
an MKPDU within the MKA Live Time (6.0 sec).
type=UInt128
access=read-only
default=0
|
|
peerRemovedDueToTimeoutPeriodic |
>
Indicates the number of peers removed from the live/potential peer list due to not receiving
an MKPDU within the MKA Live Time (6.0 sec).
type=UInt128
access=read-only
default=0
|
|
peerUsingSameMemberId |
Indicates the number of MKPDUs received which contain a peerlist with an MI entry which
conflicts with the local MI.
type=UInt128
access=read-only
default=0
|
|
peerUsingSameMemberIdPeriodic |
Indicates the number of MKPDUs received which contain a peerlist with an MI entry which
conflicts with the local MI.
type=UInt128
access=read-only
default=0
|
|
previousSakLowestPktNumber |
Indicates the Lowest Acceptable Packet Number of the previous SAK
type=UInt128
access=read-only
default=0
|
|
previousSakLowestPktNumberPeriodic |
Indicates the Lowest Acceptable Packet Number of the previous SAK
type=UInt128
access=read-only
default=0
|
|
sakDecryptFail |
Indicates the number of AES Key Wrap SAK decryption failures that have occurred.
type=UInt128
access=read-only
default=0
|
|
sakDecryptFailPeriodic |
Indicates the number of AES Key Wrap SAK decryption failures that have occurred.
type=UInt128
access=read-only
default=0
|
|
sakEncryptFail |
Indicates the number of AES Key Wrap SAK encryption failures that have occurred.
type=UInt128
access=read-only
default=0
|
|
sakEncryptFailPeriodic |
Indicates the number of AES Key Wrap SAK encryption failures that have occurred.
type=UInt128
access=read-only
default=0
|
|
sakFromNonkeyServer |
Indicates the number of SAKs received from an MKA participant that has not been designated as
the Key Server.
type=UInt128
access=read-only
default=0
|
|
sakFromNonkeyServerPeriodic |
Indicates the number of SAKs received from an MKA participant that has not been designated as
the Key Server.
type=UInt128
access=read-only
default=0
|
|
sakFromNonlivePeer |
Indicates the number of SAKs received from peer that is not a member of the Live Peers List.
type=UInt128
access=read-only
default=0
|
|
sakFromNonlivePeerPeriodic |
Indicates the number of SAKs received from peer that is not a member of the Live Peers List.
type=UInt128
access=read-only
default=0
|
|
sakGeneratedByServer |
>
Indicates the number of SAKs generated by this MKA instance.
type=UInt128
access=read-only
default=0
|
|
sakGeneratedByServerPeriodic |
>
Indicates the number of SAKs generated by this MKA instance.
type=UInt128
access=read-only
default=0
|
|
sakInstallationFailed |
Indicates the number of Secy SAK installation failures that have occurred.
type=UInt128
access=read-only
default=0
|
|
sakInstallationFailedPeriodic |
Indicates the number of Secy SAK installation failures that have occurred.
type=UInt128
access=read-only
default=0
|
|
sakInstalledForRx |
>
Indicates the number of SAKs installed for receiving.
type=UInt128
access=read-only
default=0
|
|
sakInstalledForRxPeriodic |
>
Indicates the number of SAKs installed for receiving.
type=UInt128
access=read-only
default=0
|
|
sakInstalledForTx |
>
Indicates the number of SAKs installed for transmitting.
type=UInt128
access=read-only
default=0
|
|
sakInstalledForTxPeriodic |
>
Indicates the number of SAKs installed for transmitting.
type=UInt128
access=read-only
default=0
|
|
unsupportedAgility |
Indicates the number of MKPDUs received which contain an unsupported Algorithm Agility value.
type=UInt128
access=read-only
default=0
|
|
unsupportedAgilityPeriodic |
Indicates the number of MKPDUs received which contain an unsupported Algorithm Agility value.
type=UInt128
access=read-only
default=0
|