| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| lpsLearningWinTimeWithStaticConversion |
If it is enabled, when the learning window is expired, the dynamic MACs learned
on all LPS ports will be converted to static.
It is configurable only when the learning window is enabled.
type=lps.LpsEnabledDisabled default=disabled Displayed(tab/group)=Status (/Convert To Static) |
| lpsLearningWindowBootupStatus |
If it is enabled, Learning window will start at boot-up time.
type=lps.LpsEnabledDisabled default=disabled Displayed(tab/group)=Learning Time Window Bootup Status (/Learning Window) |
| lpsLearningWindowExpiryStatus |
If it is enabled Learning Window is Running, if Disabled Learning Window has Expired.
type=lps.LpsEnabledDisabled access=read-only default=disabled Displayed(tab/group)=Learning Time Window Expiry Status (/Learning Window) |
| lpsLearningWindowNoAging |
If it is enabled, all mac-address learnt on the port would be deferred from aging.
type=lps.LpsEnabledDisabled default=disabled Displayed(tab/group)=Learning Time Window No Aging (/Learning Window) |
| lpsLearningWindowTime |
The learning time window that can be configured on the switch to learn new
MACs on the LPS port. This parameter applies to the whole switch
type=int default=0 minimum=0 maximum=65535 Displayed(tab/group)=Learning Time Window (Minutes) |
| lpsLearningWindowTimeRemaining |
Amount of time (in seconds) remaining until the learning window expires.
type=long access=read-only default=0 minimum=0 maximum=172800 units=seconds Displayed(tab/group)=Learning Time Window Time Remaining (/Learning Window) |
| portIfindex |
It converts the L2 addresses learned on the given port in IfIndex format from dynamic to static.
The value of '0' means to convert all LPS ports on the entire chassis.
type=long default=0 |
| siteId |
IP address of the node to which this Learned Port Security configuration belongs
type=InetAddress default=0.0.0.0 |
| siteIdAddrType |
type=rtr.InetAddressType default=ipv4 |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods |
|---|
deployer
: Deployer - the deployment state
synchronousDeploy
: boolean - (Optional) Specify whether to block until the changes have been fully deployed to the network. A value of "true" means to block. A value of "false" means to return immediately. Default: false (asynchronous)
clearOnDeployFailure
: boolean - (Optional) Specify whether to clear any failed deployers. A value of "true" means to clear. A value of "false" means to leave the failed deployer. Default: false
deployRetries
: int - (Optional) The number of times to attempt re-deployment during synchronous deployment. This parameter is meaningless in the asynchronous case. Default: 0
deployRetryInterval
: long - (Optional) The number of milliseconds to wait between deployment retries. This parameter is meaningless in the asynchronous case. Default: 0
taskDescription
: string - (Optional) A user friendly description of what the operation does. This information will be used by the task manager.
aInSiteId
: string - The IP address of the switch.
continueOnFailure
: continueOnFailure - (Optional) Continue processing requests in this stream if an exception occurs, unless the request is invalid. Default: false
lps.LPSConfiguration.restartLearningWindowTimerException