| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| administrativeState |
type=l2fwd.StpState default=down Displayed(tab/group)=Administrative State (/States) |
| bridgeForwardDelay |
type=int default=15 minimum=4 maximum=30 units=seconds Displayed(tab/group)=Bridge Forward Delay (/Properties) |
| bridgeHelloTime |
type=int default=2 minimum=1 maximum=10 units=seconds Displayed(tab/group)=Bridge Hello Time (/Properties) |
| bridgeMaxAge |
type=int default=20 minimum=6 maximum=40 units=seconds Displayed(tab/group)=Bridge Max Age (/Properties) |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| designatedRoot |
type=MacAddress access=read-only default=00-00-00-00-00-00 Displayed(tab/group)=Designated Root Bridge (/Properties) |
| forwardDelay |
type=int access=read-only default=0 units=seconds Displayed(tab/group)=Forward Delay (/Properties) |
| helloTime |
type=int access=read-only default=0 units=seconds Displayed(tab/group)=Hello Time (/Properties) |
| holdTime |
type=int access=read-only default=0 units=seconds Displayed(tab/group)=Hold Time (/Properties) |
| maxAge |
type=int access=read-only default=0 units=seconds Displayed(tab/group)=Max Age (/Properties) |
| operationalState |
type=l2fwd.StpState access=read-only default=unknown Displayed(tab/group)=Operational State (/States) |
| priority |
type=int default=32768 minimum=0 maximum=65535 Displayed(tab/group)=Priority (/Properties) |
| rootBridgeOperationalState |
type=l2fwd.StpState access=read-only default=unknown Displayed(tab/group)=Root Bridge Operational State (/States) |
| rootCost |
type=int access=read-only default=0 Displayed(tab/group)=Root Path Cost (/Properties) |
| rootPort |
type=int access=read-only default=0 Displayed(tab/group)=Root Port (/Properties) |
| rstpProtocol |
The value of the property specifies the
version of Spanning Tree Protocol the bridge is currently
running.
The value 'rstp(2)' corresponds to the Rapid Spanning
Tree Protocol specified in IEEE 802.1D/D4-2003.
The value 'compDot1w(3)' corresponds to the mode where the
Rapid Spanning Tree is backward compatible with IEEE
802.1w.
The value 'dot1w(4)' corresponds to the Rapid Spanning
Tree Protocol fully conformant to IEEE 802.1w.
The value 'mstp(5)' corresponds to the Multiple Spanning
Tree Protocol specified in iEEE 802.1Q-REV/D3.0-04/2005.
New values may be defined as future versions of the
protocol become available.
type=l2fwd.RstpProtocol default=rstp Displayed(tab/group)=STP Mode (/Properties) |
| stpMaxBPDUs |
type=int default=6 minimum=1 maximum=10 units=PDUs/Hello Interval Displayed(tab/group)=Maximum BPDUs (/Properties) |
| stpProtocol |
The value indicates whether stp, rstp or mstp is running on this VCP.
If the protocol is not enabled on this VCP, the value notApplicable is returned.
type=l2fwd.StpProtocol access=read-only default=notApplicable Displayed(tab/group)=Operational STP Protocol (/Properties) |
| topologyChangeInProgress |
type=boolean access=read-only default=false Displayed(tab/group)=Topology Change In Progress (/Properties) |
| Properties inherited from l2fwd.ServiceSite |
|---|
| serviceId, subscriberId, svcComponentId |
| Properties inherited from fwd.Site |
|---|
| siteId, siteName |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |