| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| administrativeState |
type=l2fwd.IgmpSnoopingState default=down Displayed(tab/group)=Administrative State |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| evpnProxy |
Specifies whether evpn-proxy mode is enabled on this service.
type=vpls.IgmpSnoopingAdminState default=disabled Displayed(tab/group)=EVPN Proxy |
| fwdIpv4McastToInt |
This property, specifies whether or not to forward IPv4 multicast traffic from the VPLS to the Routed-VPLS L3 interface.
type=boolean default=false Displayed(tab/group)=Forward IPv4 multicast to IP interface (/Routed VPLS) |
| ipMcastEcmp |
Specifies whether ECMP behavior is enabled on R-VPLS services on multicast traffic.
type=boolean default=false Displayed(tab/group)=IP Multicast ECMP (/Routed VPLS) |
| queryInterval |
type=int default=125 minimum=1 maximum=65535 units=seconds Displayed(tab/group)=Query Interval |
| querySrcAddress |
This property, together with the value of useQuerySrcAddress,
specifies the source IP address used when generating IGMP queries.
The value of this property is only used when the value of
useQuerySrcAddr is 'true'.
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Query Source Address |
| querySrcAddressType |
type=rtr.InetAddressType default=ipv4 |
| rVplsMrouter |
This property, specifies whether a multicast router is attached behind the Routed-VPLS L3 interface.
type=boolean default=false Displayed(tab/group)=MRouter Port (/Routed VPLS) |
| reportSrcAddress |
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Report Source Address |
| reportSrcAddressType |
type=rtr.InetAddressType default=ipv4 |
| robustCount |
type=int default=2 minimum=1 maximum=255 Displayed(tab/group)=Robust Count |
| serviceId |
type=long access=read-only default=0 |
| useQuerySrcAddress |
This property, together with the value of querySrcAddress, specifies
the source IP address used when generating IGMP queries.
When the value of this property is 'true', the value
configured in querySrcAddress is used as the query
source address. When the value of this property is 'false',
the IP address of the system interface is used."
type=boolean default=false Displayed(tab/group)=Use Query Source Address |
| vpls.IgmpSnpgMrouter-Set |
type=Children-Set |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |