| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| agingEnabled |
type=boolean default=true Displayed(tab/group)=Aging Enabled (/Properties) |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| discardUnknownDestinations |
type=boolean default=false Displayed(tab/group)=Discard Unknown Destinations (/Properties) |
| entries |
type=long access=read-only default=0 Displayed(tab/group)=Entries (/Properties) |
| fdbNumEntriesInUse |
Specifies the current number of entries currently in use in the FDB of this service.
type=long access=read-only default=0 Displayed(tab/group)=Entries In Use By FDB (/Properties) |
| highWatermark |
type=long default=95 minimum=0 maximum=100 units=% Displayed(tab/group)=High Watermark (/Properties) |
| knownEntries |
type=int access=read-only default=0 |
| learningEnabled |
type=boolean default=true Displayed(tab/group)=Learning Enabled (/Properties) |
| localAgeTime |
type=long default=300 minimum=60 maximum=86400 units=seconds Displayed(tab/group)=Local Age Time (/Properties) |
| lowWatermark |
type=long default=90 minimum=0 maximum=100 units=% Displayed(tab/group)=Low Watermark (/Properties) |
| macFlushOnFail |
Specifies whether a special mac-flush is sent when a
port or sap becomes operational down. Replace the property
"macflushOnFail" on VPLS site.
type=l2fwd.MacFlushAdminState default=disabled Displayed(tab/group)=MAC Flush on Fail (/Properties) |
| macMoveAdministrativeState |
type=l2fwd.MacMoveState default=down Displayed(tab/group)=Administrative State (/MAC Move) |
| macMoveFrequency |
type=int default=2 minimum=1 maximum=10 Displayed(tab/group)=Move Frequency (/MAC Move) |
| macMoveNumRetries |
"This value specifies the number of times retries are performed for re-enabling the SAP/SDP.
A value of zero indicates unlimited number of retries."
type=long default=3 minimum=0 maximum=255 Displayed(tab/group)=Number of Retries (/MAC Move) |
| macMovePrimaryPortsCumulativeFactor |
"The value specifies a factor for the secondary ports defining how many MAC-relearn periods should be used to measure the
MAC-relearn rate. This rate must be exceeded during consecutive periods before the corresponding ports (SAP and/or spoke-SDP)
are blocked by the MAC-move feature.
type=long default=3 minimum=3 maximum=10 Displayed(tab/group)=Primary Ports Cumulative Factor (/MAC Move) |
| macMoveRetryTimeout |
type=int default=10 minimum=0 maximum=120 Displayed(tab/group)=Retry Timeout (/MAC Move) |
| macMoveSecondaryPortsCumulativeFactor |
"The value specifies a factor for the secondary ports defining how many MAC-relearn periods should be used to measure the
MAC-relearn rate. This rate must be exceeded during consecutive periods before the corresponding ports (SAP and/or spoke-SDP)
are blocked by the MAC-move feature.
type=long default=2 minimum=2 maximum=9 Displayed(tab/group)=Secondary Ports Cumulative Factor (/MAC Move) |
| macSubnetLength |
"Specifies how many bits, starting from the beginning of the MAC address
are used for MAC learning and switching."
type=int default=48 minimum=24 maximum=48 Displayed(tab/group)=MAC Subnet Length (/Properties) |
| propagateMacFlush |
Specifies whether 'MAC flush' messages received from the given LDP are
propagated to all spoke-SDPs and mesh-SDPs within the context of this
VPLS service. The propagation will follow the 'split-horizon' principle
and any data-path blocking in order to avoid the looping of these messages.
type=boolean default=false Displayed(tab/group)=Propagate MAC Flush (/Properties) |
| remoteAgeTime |
type=long default=900 minimum=60 maximum=86400 units=seconds Displayed(tab/group)=Remote Age Time (/Properties) |
| selLearnedFdb |
Specifies whether the learned MAC addresses in the VPLS can be programmed selectively
on the line cards on which the service is configured.
type=boolean default=false Displayed(tab/group)=Selective Learned FDB (/Properties) |
| size |
type=long default=250 minimum=1 maximum=131071 units=entries Displayed(tab/group)=Size (/Properties) |
| staticEntries |
type=long access=read-only default=0 Displayed(tab/group)=Static Entries (/Properties) |
| Properties inherited from l2fwd.ServiceSite |
|---|
| serviceId, subscriberId, svcComponentId |
| Properties inherited from fwd.Site |
|---|
| siteId, siteName |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |