| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| portAdminConnectionType |
The administrative port's connection type for this spanning tree instance.
This parameter is used to optimize the fast Spanning Tree (6.4.3 of P802.1w).
- The default value is nopointtopoint(1).
- The value pointtopoint(2) forces the port to be treated as if it is connected
through a point-to-point LAN segment to another switch.
- Setting this parameter to autopointtopoint(3) makes the point-to-point status
to be determined automatically by the MAC entity.
- The value edgeport(4) indicates that the port is considered to be an edge port
(18.3.3 of P802.1t)
type=l2fwd.StpPortAdminConnType access=read-only default=nopointtopoint Displayed(tab/group)=Connection Type |
| portAdminEdge |
Upon initialization of the port, this will be the default setting of the operational
edge status of the port. May change depending on AutoEdge setting.
Will not change status after link is up on port.
type=layer2.StpBridgeEnableDisable access=read-only default=disabled Displayed(tab/group)=Admin Edge |
| portAutoEdge |
When enabled STP will determine the operational edge status of the port.
May overwrite the AdminEdge status, if enabled.
If disabled, port will remain as the AdminEdge state.
type=layer2.StpBridgeEnableDisable access=read-only default=enabled Displayed(tab/group)=Auto Edge |
| portManualMode |
The port's manual mode for this spanning tree instance.
This mode defines the way the state of the port(vStpPortState) is managed.
The mode can be dynamic (1) (managed by the Spanning Tree),
or manual (blocking(2) or forwarding(3)).
In manual mode, the port is not involved in the Spanning tree algorithm computation.
type=l2fwd.StpPortManualMode access=read-only default=dynamic Displayed(tab/group)=Mode |
| portRestrictedRole |
When enabled, this port will not be selected as the Root port and will be selected
as Alternate after the Root port is selected.
type=layer2.StpBridgeEnableDisable access=read-only default=disabled Displayed(tab/group)=Restricted Role |
| portRestrictedTcn |
When set to enable, this port will not propagate any topology changes or notifications
to other ports. Is used to prevent bridges outside of a core network from causing
flushes within the core network.
type=layer2.StpBridgeEnableDisable access=read-only default=disabled Displayed(tab/group)=Restricted TCN |
| Properties inherited from l2fwd.AbstractStpPort |
|---|
| bridgeMode, cardSlotNumber, insNumber, insPortIfindex, insPortNumber, portName, portPathCost, portPriority, portRole, portState, shelfNumber, siteId, siteName |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |