|
Properties |
|
actFccRetTotalSessions |
The value of actFccRetTotalSessions indicates the number of
active Real Time Transport Control Protocol (RTCP) sessions allocated
for Fast Channel Change (FCC) and Retransmission (RET) on this virtual
application.
type=long
access=read-only
default=0
|
|
actFccRetTotalSessionsPeriodic |
The value of actFccRetTotalSessions indicates the number of
active Real Time Transport Control Protocol (RTCP) sessions allocated
for Fast Channel Change (FCC) and Retransmission (RET) on this virtual
application.
type=long
access=read-only
default=0
|
|
activeFccSessions |
The value of activeFccSessions indicates the number of active
Real Time Transport Control Protocol (RTCP) sessions allocated for
Fast Channel Change (FCC) on this virtual application.
type=long
access=read-only
default=0
|
|
activeFccSessionsPeriodic |
The value of activeFccSessions indicates the number of active
Real Time Transport Control Protocol (RTCP) sessions allocated for
Fast Channel Change (FCC) on this virtual application.
type=long
access=read-only
default=0
|
|
activeRetSessions |
The value of activeRetSessions indicates the number of active
Real Time Transport Control Protocol (RTCP) sessions allocated for
Retransmission (RET) on this virtual application.
type=long
access=read-only
default=0
|
|
activeRetSessionsPeriodic |
The value of activeRetSessions indicates the number of active
Real Time Transport Control Protocol (RTCP) sessions allocated for
Retransmission (RET) on this virtual application.
type=long
access=read-only
default=0
|
|
activeRtcpSessions |
The value of activeRtcpSessions indicates the number of
active Real Time Transport Control Protocol (RTCP) sessions on this
virtual application.
type=long
access=read-only
default=0
|
|
activeRtcpSessionsPeriodic |
The value of activeRtcpSessions indicates the number of
active Real Time Transport Control Protocol (RTCP) sessions on this
virtual application.
type=long
access=read-only
default=0
|
|
adStreamAborts |
The value of adStreamAborts indicates the number of ad
stream aborts on this virtual application. An ad stream abort could
happen when an egress reset happens.
type=long
access=read-only
default=0
|
|
adStreamAbortsPeriodic |
The value of adStreamAborts indicates the number of ad
stream aborts on this virtual application. An ad stream abort could
happen when an egress reset happens.
type=long
access=read-only
default=0
|
|
adStreamResets |
The value of adStreamResets indicates the number of ad
stream resets on this virtual application. An ad stream reset occurs
when the ingress ad stream stops.
type=long
access=read-only
default=0
|
|
adStreamResetsPeriodic |
The value of adStreamResets indicates the number of ad
stream resets on this virtual application. An ad stream reset occurs
when the ingress ad stream stops.
type=long
access=read-only
default=0
|
|
availableMemory |
The value of availableMemory indicates the amount of
cache available on the virtual application for storing the video
stream.
type=UInt128
access=read-only
default=0
|
|
availableMemoryPeriodic |
The value of availableMemory indicates the amount of
cache available on the virtual application for storing the video
stream.
type=UInt128
access=read-only
default=0
|
|
bandwidthInUse |
The value of bandwidthInUse indicates the total aggregate
bandwidth of the currently running egress streams.
type=long
access=read-only
default=0
|
|
bandwidthInUsePeriodic |
The value of bandwidthInUse indicates the total aggregate
bandwidth of the currently running egress streams.
type=long
access=read-only
default=0
|
|
bandwidthPeak |
The value of bandwidthPeak indicates the maximum bandwidth of
the currently running egress streams since the last clear event.
type=long
access=read-only
default=0
|
|
bandwidthPeakPeriodic |
The value of bandwidthPeak indicates the maximum bandwidth of
the currently running egress streams since the last clear event.
type=long
access=read-only
default=0
|
|
channelAllocationFails |
The value of channelAllocationFails indicates the number of
failed channel allocations on this virtual application.
type=long
access=read-only
default=0
|
|
channelAllocationFailsPeriodic |
The value of channelAllocationFails indicates the number of
failed channel allocations on this virtual application.
type=long
access=read-only
default=0
|
|
channels |
The value of channels indicates the number of channels
being served on this virtual application.
type=long
access=read-only
default=0
|
|
channelsPeriodic |
The value of channels indicates the number of channels
being served on this virtual application.
type=long
access=read-only
default=0
|
|
currentAbsRetBandwidth |
The value of currentAbsRetBandwidth indicates the current
Retransmission (RET) bandwidth in use.
type=long
access=read-only
default=0
|
|
currentAbsRetBandwidthPeriodic |
The value of currentAbsRetBandwidth indicates the current
Retransmission (RET) bandwidth in use.
type=long
access=read-only
default=0
|
|
currentFccBandwidth |
The value of currentFccBandwidth indicates the current Fast Channel
Change (FCC) bandwidth in use.
type=long
access=read-only
default=0
|
|
currentFccBandwidthPeriodic |
The value of currentFccBandwidth indicates the current Fast Channel
Change (FCC) bandwidth in use.
type=long
access=read-only
default=0
|
|
currentFccRetTotalBandwidth |
The value of currentFccRetTotalBandwidth indicates the current total
Fast Channel Change (FCC) and Retransmission (RET) bandwidth in use.
type=long
access=read-only
default=0
|
|
currentFccRetTotalBandwidthPeriodic |
The value of currentFccRetTotalBandwidth indicates the current total
Fast Channel Change (FCC) and Retransmission (RET) bandwidth in use.
type=long
access=read-only
default=0
|
|
currentHourFccRetTotalBandwidthTime |
The value of currentHourFccRetTotalBandwidthTime indicates the time
(timestamp) when currentHourPeakFccRetTotalBandwidth occurred in the current
hour.
type=Time
access=read-only
default=0
|
|
currentHourPeakAbsRetBandwidth |
The value of currentHourPeakAbsRetBandwidth indicates the absolute peak
value of bandwidth for Retransmission requests (RET) in the current
hour.
type=long
access=read-only
default=0
|
|
currentHourPeakAbsRetBandwidthPeriodic |
The value of currentHourPeakAbsRetBandwidth indicates the absolute peak
value of bandwidth for Retransmission requests (RET) in the current
hour.
type=long
access=read-only
default=0
|
|
currentHourPeakAbsRetBandwidthTime |
The value of currentHourPeakAbsRetBandwidthTime indicates the time
(timestamp) when currentHourPeakAbsRetBandwidth occurred in the current
hour.
type=Time
access=read-only
default=0
|
|
currentHourPeakFccBandwidth |
The value of currentHourPeakFccBandwidth indicates the peak value of
bandwidth for Fast Channel Change (FCC) requests since the last hour.
type=long
access=read-only
default=0
|
|
currentHourPeakFccBandwidthPeriodic |
The value of currentHourPeakFccBandwidth indicates the peak value of
bandwidth for Fast Channel Change (FCC) requests since the last hour.
type=long
access=read-only
default=0
|
|
currentHourPeakFccBandwidthTime |
The value of currentHourPeakFccBandwidthTime indicates the time
(timestamp) when currentHourPeakFccBandwidth occurred in the current hour.
type=Time
access=read-only
default=0
|
|
currentHourPeakFccRetTotalBandwidth |
The value of currentHourPeakFccRetTotalBandwidth indicates the total peak
value of bandwidth for Channel Change (FCC) and Retransmission (RET)
requests in the current hour.
type=long
access=read-only
default=0
|
|
currentHourPeakFccRetTotalBandwidthPeriodic |
The value of currentHourPeakFccRetTotalBandwidth indicates the total peak
value of bandwidth for Channel Change (FCC) and Retransmission (RET)
requests in the current hour.
type=long
access=read-only
default=0
|
|
currentHourPeakFccRetTotalSessionTime |
The value of currentHourPeakFccRetTotalSessionTime indicates the time
(timestamp) when currentHourPeakFccRetTotalSessions occurred in the
current hour.
type=Time
access=read-only
default=0
|
|
currentHourPeakFccRetTotalSessions |
The value of currentHourPeakFccRetTotSess indicates the total peak
number of sessions for Fast Channel Change (FCC) and Retransmission
(RET) since the last hour.
type=long
access=read-only
default=0
|
|
currentHourPeakFccRetTotalSessionsPeriodic |
The value of currentHourPeakFccRetTotSess indicates the total peak
number of sessions for Fast Channel Change (FCC) and Retransmission
(RET) since the last hour.
type=long
access=read-only
default=0
|
|
currentHourPeakFccSessions |
The value of currentHourPeakFccSession indicates the peak number of
Fast Channel Change (FCC) sessions in the current hour.
type=long
access=read-only
default=0
|
|
currentHourPeakFccSessionsPeriodic |
The value of currentHourPeakFccSession indicates the peak number of
Fast Channel Change (FCC) sessions in the current hour.
type=long
access=read-only
default=0
|
|
currentHourPeakFccSessionsTime |
The value of currentHourPeakFccSessionTime indicates the time
(timestamp) when currentHourPeakFccSessions occurred in the current
hour.
type=Time
access=read-only
default=0
|
|
currentHourPeakRetSessions |
The value of currentHourPeakRetSessions indicates the peak number of
Retransmission (RET) sessions in the current hour.
type=long
access=read-only
default=0
|
|
currentHourPeakRetSessionsPeriodic |
The value of currentHourPeakRetSessions indicates the peak number of
Retransmission (RET) sessions in the current hour.
type=long
access=read-only
default=0
|
|
currentHourPeakRetSessionsTime |
The value of currentHourPeakRetSessionsTime indicates the time
(timestamp) when currentHourPeakRetSessions occurred in the current
hour.
type=Time
access=read-only
default=0
|
|
currentTotalRetBandwidth |
The value of currentTotalRetBandwidth indicates the current total
Retransmission (RET) bandwidth in use.
type=long
access=read-only
default=0
|
|
currentTotalRetBandwidthPeriodic |
The value of currentTotalRetBandwidth indicates the current total
Retransmission (RET) bandwidth in use.
type=long
access=read-only
default=0
|
|
dentDroppedPkts |
The value of dentDroppedPkts indicates the number of
packets dropped by the video virtual application due to denting.
type=long
access=read-only
default=0
|
|
dentDroppedPktsPeriodic |
The value of dentDroppedPkts indicates the number of
packets dropped by the video virtual application due to denting.
type=long
access=read-only
default=0
|
|
egressStreamResets |
The value of egressStreamResets indicates the number of
egress stream resets on this virtual application. An egress stream
reset occurs when there are no packets to transmit on the virtual
application.
type=long
access=read-only
default=0
|
|
egressStreamResetsPeriodic |
The value of egressStreamResets indicates the number of
egress stream resets on this virtual application. An egress stream
reset occurs when there are no packets to transmit on the virtual
application.
type=long
access=read-only
default=0
|
|
fccDropCntReq |
The value of fccDropCntReq indicates the drop count for
the Fast Channel Change (FCC) requests due to reserved Retransmission
(RET) bandwidth.
type=long
access=read-only
default=0
|
|
fccDropCntReqPeriodic |
The value of fccDropCntReq indicates the drop count for
the Fast Channel Change (FCC) requests due to reserved Retransmission
(RET) bandwidth.
type=long
access=read-only
default=0
|
|
hiPktPoolLimitHit |
The value of hiPktPoolLimitHit indicates the number of
times the high packet pool limit has been hit. A high value of this
object indicates potential failure in ingress packet storage.
type=long
access=read-only
default=0
|
|
hiPktPoolLimitHitPeriodic |
The value of hiPktPoolLimitHit indicates the number of
times the high packet pool limit has been hit. A high value of this
object indicates potential failure in ingress packet storage.
type=long
access=read-only
default=0
|
|
ingressStreamResets |
The value of ingressStreamResets indicates the number of
ingress stream resets on this virtual application. An ingress stream
reset occurs when the ingress stream stopped coming in for more than
one second.
type=long
access=read-only
default=0
|
|
ingressStreamResetsPeriodic |
The value of ingressStreamResets indicates the number of
ingress stream resets on this virtual application. An ingress stream
reset occurs when the ingress stream stopped coming in for more than
one second.
type=long
access=read-only
default=0
|
|
lastHourFccRetTotalBandwidthTime |
The value of lastHourFccRetTotalBandwidthTime indicates the time
(timestamp) when lastHourPeakFccRetTotalBandwidth occurred in the last
hour.
type=Time
access=read-only
default=0
|
|
lastHourFccRetTotalSessionsTime |
The value of lastHourFccRetTotalSessionsTime indicates the time
(timestamp) when lastHourPeakFccRetTotSessions occurred in the last
hour.
type=Time
access=read-only
default=0
|
|
lastHourPeakAbsRetBandwidth |
The value of lastHourPeakAbsRetBandwidth indicates the absolute peak
value of bandwidth for Retransmission requests (RET) in the last hour.
type=long
access=read-only
default=0
|
|
lastHourPeakAbsRetBandwidthPeriodic |
The value of lastHourPeakAbsRetBandwidth indicates the absolute peak
value of bandwidth for Retransmission requests (RET) in the last hour.
type=long
access=read-only
default=0
|
|
lastHourPeakAbsRetBandwidthTime |
The value of lastHourPeakAbsRetBandwidthTime indicates the time
(timestamp) when lastHourPeakAbsRetBandwidth occurred in the last
hour..
type=Time
access=read-only
default=0
|
|
lastHourPeakFccBandwidth |
The value of lastHourPeakFccBandwidth indicates the peak value of
bandwidth for Fast Channel Change (FCC) requests since the last hour.
type=long
access=read-only
default=0
|
|
lastHourPeakFccBandwidthPeriodic |
The value of lastHourPeakFccBandwidth indicates the peak value of
bandwidth for Fast Channel Change (FCC) requests since the last hour.
type=long
access=read-only
default=0
|
|
lastHourPeakFccBandwidthTime |
The value of lastHourPeakFccBandwidthTime indicates the time
(timestamp) when lastHourPeakFccBandwidth occurred in the last hour.
type=Time
access=read-only
default=0
|
|
lastHourPeakFccRetTotSessions |
The value of lastHourPeakFccRetTotSessions indicates the total peak
number of sessions for Fast Channel Change (FCC) and Retransmission
(RET) since the last hour.
type=long
access=read-only
default=0
|
|
lastHourPeakFccRetTotSessionsPeriodic |
The value of lastHourPeakFccRetTotSessions indicates the total peak
number of sessions for Fast Channel Change (FCC) and Retransmission
(RET) since the last hour.
type=long
access=read-only
default=0
|
|
lastHourPeakFccRetTotalBandwidth |
The value of lastHourPeakFccRetTotalBandwidth indicates the total peak
value of bandwidth for Channel Change (FCC) and Retransmission (RET)
requests in the last hour.
type=long
access=read-only
default=0
|
|
lastHourPeakFccRetTotalBandwidthPeriodic |
The value of lastHourPeakFccRetTotalBandwidth indicates the total peak
value of bandwidth for Channel Change (FCC) and Retransmission (RET)
requests in the last hour.
type=long
access=read-only
default=0
|
|
lastHourPeakFccSessions |
The value of lastHourPeakFccSessions indicates the peak number of
Fast Channel Change (FCC) sessions in the last hour.
type=long
access=read-only
default=0
|
|
lastHourPeakFccSessionsPeriodic |
The value of lastHourPeakFccSessions indicates the peak number of
Fast Channel Change (FCC) sessions in the last hour.
type=long
access=read-only
default=0
|
|
lastHourPeakFccSessionsTime |
The value of lastHourPeakFccSessionTime indicates the time
(timestamp) when lastHourPeakFccSession occurred in the last
hour.
type=Time
access=read-only
default=0
|
|
lastHourPeakRetSessions |
The value of lastHourPeakRetSessions indicates the peak number of
Retransmission (RET) sessions in the last hour.
type=long
access=read-only
default=0
|
|
lastHourPeakRetSessionsPeriodic |
The value of lastHourPeakRetSessions indicates the peak number of
Retransmission (RET) sessions in the last hour.
type=long
access=read-only
default=0
|
|
lastHourPeakRetSessionsTime |
The value of lastHourPeakRetSessionsTime indicates the time
(timestamp) when lastHourPeakRetSessions occurred in the last
hour.
type=Time
access=read-only
default=0
|
|
mallocFailures |
The value of mallocFailures indicates the number of
memory allocation failures on the management core of the video virtual
application.
type=long
access=read-only
default=0
|
|
mallocFailuresPeriodic |
The value of mallocFailures indicates the number of
memory allocation failures on the management core of the video virtual
application.
type=long
access=read-only
default=0
|
|
maxBandwidthExceeded |
The value of maxBandwidthExceeded indicates the number of times
maximum allowed bandwidth has been exceeded for each egress stream.
type=long
access=read-only
default=0
|
|
maxBandwidthExceededPeriodic |
The value of maxBandwidthExceeded indicates the number of times
maximum allowed bandwidth has been exceeded for each egress stream.
type=long
access=read-only
default=0
|
|
mcRetReqCreated |
The value of mcRetReqCreated indicates the total number of
mcast retransmission requests created in response to the unicast
retransmission requests.
type=UInt128
access=read-only
default=0
|
|
mcRetReqCreatedPeriodic |
The value of mcRetReqCreated indicates the total number of
mcast retransmission requests created in response to the unicast
retransmission requests.
type=UInt128
access=read-only
default=0
|
|
mcRtcp |
The value of mcRtcp indicates the number of multicast
retransmissions done in response to Real Time Transport Control
Protocol (RTCP) requests.
type=UInt128
access=read-only
default=0
|
|
mcRtcpPeriodic |
The value of mcRtcp indicates the number of multicast
retransmissions done in response to Real Time Transport Control
Protocol (RTCP) requests.
type=UInt128
access=read-only
default=0
|
|
mcRudp |
The value of mcRudp indicates the number of multicast
retransmissions done in response to Reliable User Datagram Protocol
(RUDP) requests.
type=UInt128
access=read-only
default=0
|
|
mcRudpPeriodic |
The value of mcRudp indicates the number of multicast
retransmissions done in response to Reliable User Datagram Protocol
(RUDP) requests.
type=UInt128
access=read-only
default=0
|
|
peakAbsRetBandwidth |
The value of peakAbsRetBandwidth indicates the absolute peak
value of bandwidth for Retransmission requests (RET) since the last
reboot/clear.
type=long
access=read-only
default=0
|
|
peakAbsRetBandwidthPeriodic |
The value of peakAbsRetBandwidth indicates the absolute peak
value of bandwidth for Retransmission requests (RET) since the last
reboot/clear.
type=long
access=read-only
default=0
|
|
peakAbsRetBandwidthTime |
The value of peakAbsRetBandwidthTime indicates the time
(timestamp) when PeakAbsRetBandwidth occurred since the last
reboot/clear..
type=Time
access=read-only
default=0
|
|
peakFccBandwidth |
The value of peakFccBandwidth indicates the peak value of
bandwidth for Fast Channel Change (FCC) requests since the last
reboot/clear.
type=long
access=read-only
default=0
|
|
peakFccBandwidthPeriodic |
The value of peakFccBandwidth indicates the peak value of
bandwidth for Fast Channel Change (FCC) requests since the last
reboot/clear.
type=long
access=read-only
default=0
|
|
peakFccBandwidthTime |
The value of peakFccBandwidthTime indicates the time
(timestamp) when peakFccBandwidth occurred since the last
reboot/clear.
type=Time
access=read-only
default=0
|
|
peakFccRetTotalBandwidth |
The value of peakFccRetTotalBandwidth indicates the total peak
value of bandwidth for Channel Change (FCC) and Retransmission (RET)
requests since the last reboot/clear.
type=long
access=read-only
default=0
|
|
peakFccRetTotalBandwidthPeriodic |
The value of peakFccRetTotalBandwidth indicates the total peak
value of bandwidth for Channel Change (FCC) and Retransmission (RET)
requests since the last reboot/clear.
type=long
access=read-only
default=0
|
|
peakFccRetTotalBandwidthTime |
The value of peakFccRetTotalBandwidthTime indicates the time
(timestamp) when PeakFccRetTotalBandwidth occurred since the last
reboot/clear.
type=Time
access=read-only
default=0
|
|
peakFccRetTotalSessions |
The value of peakFccRetTotalSessions indicates the total peak
number of sessions for Fast Channel Change (FCC) and Retransmission
(RET) since the last reboot/clear.
type=long
access=read-only
default=0
|
|
peakFccRetTotalSessionsPeriodic |
The value of peakFccRetTotalSessions indicates the total peak
number of sessions for Fast Channel Change (FCC) and Retransmission
(RET) since the last reboot/clear.
type=long
access=read-only
default=0
|
|
peakFccRetTotalSessionsTime |
The value of peakFccRetTotalSessionsTime indicates the time
(timestamp) when peakFccRetTotalSessions occurred since the
last reboot/clear.
type=Time
access=read-only
default=0
|
|
peakFccSessions |
The value of peakFccSessions indicates the peak number of
Fast Channel Change (FCC) sessions since the last reboot/clear.
type=long
access=read-only
default=0
|
|
peakFccSessionsPeriodic |
The value of peakFccSessions indicates the peak number of
Fast Channel Change (FCC) sessions since the last reboot/clear.
type=long
access=read-only
default=0
|
|
peakFccSessionsTime |
The value of peakFccSessionsTime indicates the time
(timestamp) when peakFccSessions occurred since the last
reboot/clear.
type=Time
access=read-only
default=0
|
|
peakRetBandwith |
The value of peakRetBandwith indicates the maximum
Retransmission (RET) bandwidth used since the last clear event.
type=long
access=read-only
default=0
|
|
peakRetBandwithPeriodic |
The value of peakRetBandwith indicates the maximum
Retransmission (RET) bandwidth used since the last clear event.
type=long
access=read-only
default=0
|
|
peakRetSessions |
The value of peakRetSessions indicates the peak number of
Retransmission (RET) sessions since the last reboot/clear.
type=long
access=read-only
default=0
|
|
peakRetSessionsPeriodic |
The value of peakRetSessions indicates the peak number of
Retransmission (RET) sessions since the last reboot/clear.
type=long
access=read-only
default=0
|
|
peakRetSessionsTime |
The value of peakRetSessionsTime indicates the time
(timestamp) when peakRetSessions occurred since the last
reboot/clear.
type=Time
access=read-only
default=0
|
|
pktsLostInSeq10 |
The value of pktsLostInSeq10 indicates the total number
of packets within sequences of 2 to 10 consecutive lost packets of the
video group on this virtual application.
type=long
access=read-only
default=0
|
|
pktsLostInSeq10Periodic |
The value of pktsLostInSeq10 indicates the total number
of packets within sequences of 2 to 10 consecutive lost packets of the
video group on this virtual application.
type=long
access=read-only
default=0
|
|
pktsLostInSeq20 |
The value of pktsLostInSeq20 indicates the total number
of packets within sequences of 11 to 20 consecutive lost packets of
the video group on this virtual application.
type=long
access=read-only
default=0
|
|
pktsLostInSeq20Periodic |
The value of pktsLostInSeq20 indicates the total number
of packets within sequences of 11 to 20 consecutive lost packets of
the video group on this virtual application.
type=long
access=read-only
default=0
|
|
pktsLostInSeq30 |
The value of pktsLostInSeq30 indicates the total number
of packets within sequences of 21 to 30 consecutive lost packets of
the video group on this virtual application.
type=long
access=read-only
default=0
|
|
pktsLostInSeq30Periodic |
The value of pktsLostInSeq30 indicates the total number
of packets within sequences of 21 to 30 consecutive lost packets of
the video group on this virtual application.
type=long
access=read-only
default=0
|
|
pktsLostInSeq40 |
The value of pktsLostInSeq40 indicates the total number
of packets within sequences of 31 to 40 consecutive lost packets of
the video group on this virtual application.
type=long
access=read-only
default=0
|
|
pktsLostInSeq40Periodic |
The value of pktsLostInSeq40 indicates the total number
of packets within sequences of 31 to 40 consecutive lost packets of
the video group on this virtual application.
type=long
access=read-only
default=0
|
|
pktsLostInSeqMore |
The value of pktsLostInSeqMore indicates the total
number of packets within sequences of 41 or more consecutive lost
packets of the video group on this virtual application.
type=long
access=read-only
default=0
|
|
pktsLostInSeqMorePeriodic |
The value of pktsLostInSeqMore indicates the total
number of packets within sequences of 41 or more consecutive lost
packets of the video group on this virtual application.
type=long
access=read-only
default=0
|
|
receivedDataOctets |
The value of receivedDataOctets indicates the number of data
octets received on this virtual application.
type=UInt128
access=read-only
default=0
|
|
receivedDataOctetsPeriodic |
The value of receivedDataOctets indicates the number of data
octets received on this virtual application.
type=UInt128
access=read-only
default=0
|
|
receivedDataPacketErrors |
The value of receivedDataPacketErrors indicates the number of
malformed or non-RTP (Real Time Transport Protocol) packets received
on this virtual application.
type=UInt128
access=read-only
default=0
|
|
receivedDataPacketErrorsPeriodic |
The value of receivedDataPacketErrors indicates the number of
malformed or non-RTP (Real Time Transport Protocol) packets received
on this virtual application.
type=UInt128
access=read-only
default=0
|
|
receivedDataPackets |
The value of receivedDataPackets indicates the number of data
packets received on this virtual application.
type=UInt128
access=read-only
default=0
|
|
receivedDataPacketsPeriodic |
The value of receivedDataPackets indicates the number of data
packets received on this virtual application.
type=UInt128
access=read-only
default=0
|
|
requestedRtpPkts |
The value of requestedRtpPkts indicates the number of
Real-time Transport Protocol (RTP) packets requested in the Real-time
Transport Control Protocol (RTCP) feedback (FB) messages received on
this virtual application.
type=long
access=read-only
default=0
|
|
requestedRtpPktsPeriodic |
The value of requestedRtpPkts indicates the number of
Real-time Transport Protocol (RTP) packets requested in the Real-time
Transport Control Protocol (RTCP) feedback (FB) messages received on
this virtual application.
type=long
access=read-only
default=0
|
|
retReqQuenched |
The value of retReqQuenched indicates the total number of
unicast retransmission requests quenched with the mulicast
retransmission.
type=UInt128
access=read-only
default=0
|
|
retReqQuenchedPeriodic |
The value of retReqQuenched indicates the total number of
unicast retransmission requests quenched with the mulicast
retransmission.
type=UInt128
access=read-only
default=0
|
|
rtcpConfigErrors |
The value of rtcpConfigErrors indicates the number of
Real-time Transport Control Protocol (RTCP) config errors on this
virtual application. These errors occur when there is inconsistency
between the RTCP values and the configured values.
type=long
access=read-only
default=0
|
|
rtcpConfigErrorsPeriodic |
The value of rtcpConfigErrors indicates the number of
Real-time Transport Control Protocol (RTCP) config errors on this
virtual application. These errors occur when there is inconsistency
between the RTCP values and the configured values.
type=long
access=read-only
default=0
|
|
rtcpIntErrors |
The value of rtcpIntErrors indicates the number of
Real-time Transport Control Protocol (RTCP) interface related errors
on this virtual application.
type=long
access=read-only
default=0
|
|
rtcpIntErrorsPeriodic |
The value of rtcpIntErrors indicates the number of
Real-time Transport Control Protocol (RTCP) interface related errors
on this virtual application.
type=long
access=read-only
default=0
|
|
rtcpIpcErrors |
The value of rtcpIpcErrors indicates the number of
Real-time Transport Control Protocol (RTCP) inter-process
communication message processing errors on this virtual application.
type=long
access=read-only
default=0
|
|
rtcpIpcErrorsPeriodic |
The value of rtcpIpcErrors indicates the number of
Real-time Transport Control Protocol (RTCP) inter-process
communication message processing errors on this virtual application.
type=long
access=read-only
default=0
|
|
rtcpParseErrors |
The value of rtcpParseErrors indicates the number of
Real-time Transport Control Protocol (RTCP) packet parsing errors on
this virtual application.
type=long
access=read-only
default=0
|
|
rtcpParseErrorsPeriodic |
The value of rtcpParseErrors indicates the number of
Real-time Transport Control Protocol (RTCP) packet parsing errors on
this virtual application.
type=long
access=read-only
default=0
|
|
rtcpSgErrors |
The value of rtcpSgErrors indicates the number of
Real-time Transport Control Protocol (RTCP) channel errors on this
virtual application. These errors occur when a channel is not found
for a given interface to process RTCP packets.
type=long
access=read-only
default=0
|
|
rtcpSgErrorsPeriodic |
The value of rtcpSgErrors indicates the number of
Real-time Transport Control Protocol (RTCP) channel errors on this
virtual application. These errors occur when a channel is not found
for a given interface to process RTCP packets.
type=long
access=read-only
default=0
|
|
rtcpSubErrors |
The value of rtcpSubErrors indicates the number of
Real-time Transport Control Protocol (RTCP) subscriber parameter
errors on this virtual application. These errors occur when the
subscriber calculations exceed the maximum allowed bandwidth.
type=long
access=read-only
default=0
|
|
rtcpSubErrorsPeriodic |
The value of rtcpSubErrors indicates the number of
Real-time Transport Control Protocol (RTCP) subscriber parameter
errors on this virtual application. These errors occur when the
subscriber calculations exceed the maximum allowed bandwidth.
type=long
access=read-only
default=0
|
|
ssrcCollisions |
The value of ssrcCollisions indicates the number of
synchronization source (SSRC) id collisions on this virtual
application.
type=long
access=read-only
default=0
|
|
ssrcCollisionsPeriodic |
The value of ssrcCollisions indicates the number of
synchronization source (SSRC) id collisions on this virtual
application.
type=long
access=read-only
default=0
|
|
transmittedDataOctets |
The value of transmittedDataOctets indicates the number of data
octets transmitted on this virtual application.
type=UInt128
access=read-only
default=0
|
|
transmittedDataOctetsPeriodic |
The value of transmittedDataOctets indicates the number of data
octets transmitted on this virtual application.
type=UInt128
access=read-only
default=0
|
|
transmittedDataPacketErrors |
The value of transmittedDataPacketErrors indicates the number of
failed data packets due to lack of resources to be transmitted on this
virtual application.
type=UInt128
access=read-only
default=0
|
|
transmittedDataPacketErrorsPeriodic |
The value of transmittedDataPacketErrors indicates the number of
failed data packets due to lack of resources to be transmitted on this
virtual application.
type=UInt128
access=read-only
default=0
|
|
transmittedDataPackets |
The value of transmittedDataPackets indicates the number of data
packets transmitted on this virtual application.
type=UInt128
access=read-only
default=0
|
|
transmittedDataPacketsPeriodic |
The value of transmittedDataPackets indicates the number of data
packets transmitted on this virtual application.
type=UInt128
access=read-only
default=0
|
|
transmittedLostPackets |
The value of transmittedLostPackets indicates the number of
packets not found in the video virtual application buffer for
retransmission. When a retransmission request arrives, packets are
checked in the buffer and if they are not found, the value of this
object is incremented.
type=long
access=read-only
default=0
|
|
transmittedLostPacketsPeriodic |
The value of transmittedLostPackets indicates the number of
packets not found in the video virtual application buffer for
retransmission. When a retransmission request arrives, packets are
checked in the buffer and if they are not found, the value of this
object is incremented.
type=long
access=read-only
default=0
|
|
usedMemory |
The value of usedMemory indicates the amount of cache
being used by the video group for storing the video stream.
type=UInt128
access=read-only
default=0
|
|
usedMemoryPeriodic |
The value of usedMemory indicates the amount of cache
being used by the video group for storing the video stream.
type=UInt128
access=read-only
default=0
|