Overview Package Class Deprecated Help

ipsec
IPSecSecurityPolicyEntry

public class IPSecSecurityPolicyEntry

Properties
creationOrigin

type=svt.L2RouteOriginType
access=read-create
default=manual
ipsecPolicyEntryId Identifies the ID of a Security Policy entry and is the primary index for the table.

type=long
access=read-create
default=0
minimum=1
maximum=16
Displayed(tab/group)=Entry ID
ipsecPolicyId Identifies the ID of a Security Policy and is the primary index for the table.

type=long
access=read-only
minimum=0
maximum=8192
localAddrAny Specifies whether the IP address on the VPN side can be any IP address. If the value is 'true' then local IP address can be any IP address.

type=boolean
default=false
localAddress Specifies the IP address on the VPN side. If the value of localAddrAny is 'true' then the value of localAddress will be empty.

type=InetAddress
default=0.0.0.0
Displayed(tab/group)=IP Address (/Local IP Address)
localAddressOption The Local Address Option specifies the local IP prefix for the IPsec security policy entry. The NFM-P considers the local IP as the source IP when traffic is examined in the direction of the VPRN to the tunnel, and as the destination IP when traffic flows from the tunnel to the VPRN.

type=ipsec.AddressOptionType
default=0
Displayed(tab/group)=Local Address Option (/Local IP Address)
localAddressType Specifies the address type of local address. If the value of localAddressAny is 'true' then the value of localAddressType will be 'unknown'.

type=rtr.InetAddressType
access=read-only
default=ipv4

suppress enums=dns, ipv4Mcast, ipv4z, ipv6, ipv6Mcast, ipv6z (Where parent is one of (ipsec.IPSecSecurityPolicy))
localPrefixLength When combined with an IP address value, the Prefix Length parameter specifies a local IP prefix. The range is 1 to 32 for an IPv4 address. A value of 32 is typically reserved for an IPv4 system address. The IPv4 default is 24.

type=int
default=0
minimum=0
maximum=32
Displayed(tab/group)=Prefix length (/Local IP Address)
localV6AddrAny Specifies whether the IP address on the VPN side can be any IP address. If the value is 'true' then local IP address can be any IP address.

type=boolean
default=false
localV6Address Specifies the IP address on the VPN side. If the value of localV6AddrAny is 'true' then the value of localV6Address will be empty.

type=InetAddress
default=0:0:0:0:0:0:0:0
Displayed(tab/group)=IPv6 Address (/Local IPv6 Address)
localV6AddressOption To select either 'localV6AddrAny' or specify the local address.

type=ipsec.AddressOptionType
default=0
Displayed(tab/group)=Local IPv6 Address Option (/Local IPv6 Address)
localV6AddressType Specifies the address type of local address. If the value of localV6AddrAny is 'true' then the value of localV6AddressType will be 'unknown'.

type=rtr.InetAddressType
access=read-only
default=ipv6
localV6PrefixLength Specifies the number of bits to match the local address. If the value of localV6AddrAny is 'true' then the value of localV6PrefixLength will be 0.

type=int
default=0
minimum=0
maximum=128
Displayed(tab/group)=Prefix length (/Local IPv6 Address)
remoteAddrAny Specifies whether the IP address on the tunnel side can be any IP address. If the value is 'true' then remote IP address can be any IP address.

type=boolean
default=false
remoteAddress Specifies the IP address on the tunnel side. If the value of remoteAddrAny is 'true' then the value of remoteAddress will be empty.

type=InetAddress
default=0.0.0.0
Displayed(tab/group)=IP Address (/Remote IP Address)
remoteAddressOption The Remote Address Option specifies the remote IP prefix for the IPsec security policy entry. The NFM-P considers the remote IP as the source IP when traffic flows from the tunnel to the VPN when traffic flows from the VPRN to the tunnel.

type=ipsec.AddressOptionType
default=0
Displayed(tab/group)=Remote Address Option (/Remote IP Address)
remoteAddressType Specifies the address type of address in remoteAddress. If the value of remotelAddrAny is 'true' then the value of remoteAddressType will be 'unknown'.

type=rtr.InetAddressType
access=read-only
default=ipv4

suppress enums=dns, ipv4Mcast, ipv4z, ipv6, ipv6Mcast, ipv6z (Where parent is one of (ipsec.IPSecSecurityPolicy))
remotePrefixLength When combined with an IP address value, the Prefix Length parameter specifies a remote IP prefix. The range is 1 to 32 for an IPv4 address. A value of 32 is typically reserved for an IPv4 system address. The IPv4 default is 24.

type=int
default=0
minimum=0
maximum=32
Displayed(tab/group)=Prefix length (/Remote IP Address)
remoteV6AddrAny Specifies whether the IP address on the tunnel side can be any IP address. If the value is 'true' then remote IP address can be any IP address.

type=boolean
default=false
remoteV6Address Specifies the IP address on the tunnel side. If the value of remoteV6AddrAny is 'true' then the value of remoteV6Address will be empty.

type=InetAddress
default=0:0:0:0:0:0:0:0
Displayed(tab/group)=IPv6 Address (/Remote IPv6 Address)
remoteV6AddressOption To select either 'localV6AddrAny' or specify the local address.

type=ipsec.AddressOptionType
default=0
Displayed(tab/group)=Remote IPv6 Address Option (/Remote IPv6 Address)
remoteV6AddressType Specifies the address type of address in remoteV6Address. If the value of remoteV6AddrAny is 'true' then the value of remoteV6AddressType will be 'unknown'.

type=rtr.InetAddressType
access=read-only
default=ipv6
remoteV6PrefixLength Specifies the number of bits to match of the remoteV6Address. If the value of remoteV6AddrAny is 'true' then the value of remoteV6PrefixLength will be 0.

type=int
default=0
minimum=0
maximum=128
Displayed(tab/group)=Prefix length (/Remote IPv6 Address)
serviceId Identifies the service the IPsec Security belongs to.

type=long
access=read-only
default=0
siteId

type=string
access=read-only
default=0.0.0.0
maximum=50
  
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed
 
Supported Network Elements
7750 SR Supported from 10.0.R1 until 13.0.R13
  • Excluded chassis types: 7750-SR1, 7750-SRc4, 7750-SRa4, 7750-SRa8, 7750 SR-1e, 7750 SR-2e, 7750 SR-3e, 7750-SR1 Fixed CFM, 7750 SR-14s, 7750 SR-7s, 7750 SR-1s, 7750 SR-2s
Supported from 13.0.R13 until 14.0.R1
  • Excluded chassis types: 7750-SRc4, 7750-SRa4, 7750-SRa8, 7750-SR1 Fixed CFM, 7750 SR-14s, 7750 SR-7s, 7750 SR-1s, 7750 SR-2s
Supported from 14.0.R1 until 14.0.R4
  • Excluded chassis types: 7750-SRc4, 7750-SRa4, 7750-SRa8, 7750 SR-1e, 7750 SR-2e, 7750 SR-3e, 7750-SR1 Fixed CFM, 7750 SR-14s, 7750 SR-7s, 7750 SR-1s, 7750 SR-2s
Supported from 14.0.R4 until 20.10.R1
  • Excluded chassis types: 7750-SRc4, 7750-SRa4, 7750-SRa8, 7750-SR1 Fixed CFM, 7750 SR-14s, 7750 SR-7s, 7750 SR-1s, 7750 SR-2s
Supported from 20.10.R1 until 21.2.R1
  • Excluded chassis types: 7750-SRc4, 7750-SRa4, 7750-SRa8, 7750 SR-14s, 7750 SR-7s, 7750 SR-1s
Supported from 21.2.R1 until 21.7.R1
  • Excluded chassis types: 7750-SRc4, 7750-SRa4, 7750-SRa8, 7750 SR-7s, 7750 SR-14s
Supported from 21.7.R1
  • Excluded chassis types: 7750-SRc4, 7750-SRa4, 7750-SRa8
7705 SAR Gen 2
7450 ESS Supported from 11.0.R1
  • Excluded chassis types: 7450-ESS1
  • Required Capabilities: MixedMode
7705 SAR Hm
7705 SAR Supported from 6.1.R1
  • Excluded chassis types: 7705-SARM ASAP, 7705-SARM, 7705-SARM ASAP FL, 7705-SARM FL, 7705 SAR-A T1/E1, 7705 SAR-A, 7705-SARF
7705 SAR H Supported from 6.1.R1
Product Specifics
7450 ESS 20.0
7450 ESS 21.0
7450 ESS 22.0
7450 ESS 23.0
7450 ESS 24.0
7450 ESS 25.0
7705 SAR Gen 2 25.0
7705 SAR H 20.0
7705 SAR H 21.0
7705 SAR H 22.0
7705 SAR H 23.0
7705 SAR H 24.0
7705 SAR H 25.0
7705 SAR H 9.0
7705 SAR Hm 20.0
7705 SAR Hm 21.0
7705 SAR Hm 22.0
7705 SAR Hm 23.0
7705 SAR Hm 24.0
7705 SAR Hm 25.0
7705 SAR 20.0
7705 SAR 21.0
7705 SAR 22.0
7705 SAR 23.0
7705 SAR 24.0
7705 SAR 25.0
7750 SR 20.0
7750 SR 21.0
7750 SR 22.0
7750 SR 23.0
7750 SR 24.0
7750 SR 25.0