|
Properties |
|
targetIpAddressType |
Specifies address type of targetIpAddress.
type=icmp.InetAddressType
|
|
targetIpAddress |
Specifies the destination IP address used in the ICMP ping.
type=InetAddress
|
|
virtualRouterId |
The unique value which identifies this virtual router in the
7x50 SR system. The vRtrID value for each virtual router
must remain constant at least from one re-initialization of the
system management processor (CPM) to the next. There will always
be at least one router entry defined by the agent with vRtrID=1
which represents the base transport router.
If no value is specified the base router ID is used.
type=long
|
|
timeToLive |
Specifies the vc-label time-to-live value
type=long
|
|
forwardingClass |
Specifies the forwarding class the ICMP ping test used.
type=qos.FcEnum
|
|
fcQueue |
Specifies the forwarding class queue the ICMP ping test used.
type=boolean
|
|
forwardingClassId |
Specifies the forwarding class ID the icmp ping test used.
This value is generated from the forwardingClass property.
type=string
|
|
profile |
Specifies the profile value used with the
forwarding class specified in forwardingClass.
type=qos.Profile
|
|
testTargetType |
Specifies the target type of the pingtest. The
target may either be an Core Routing Instance, or VPRN Site.
type=sas.TestTarget
|
|
srplEndPointAddrType |
Specifies the type of IP address stored in tmnxOamIcmpPingCtlSrV6PyEndPtAdd.
The supported object combinations for 'icmpPing' tests are listed in
the tmnxOamIcmpPingCtlTable DESCRIPTION clause.
type=icmp.InetAddressType
|
|
srplEndPointAddr |
The Segment Routing (SR) policy endpoint address to be used for the SRPL test.
leave empty for non-SRPL tests.
type=InetAddress
|
|
srplPolicyColor |
specifies the Segment Routing (SR) policy color to be used for the test. A color associates an
SR policy with an intent (e.g. low latency).
type=long
|