|
Properties |
|
sourceIpAddressType |
type=icmp.InetAddressType
|
|
sourceIpAddress |
type=InetAddress
|
|
targetIpAddressType |
type=icmp.InetAddressType
|
|
targetIpAddress |
type=InetAddress
|
|
maxTimeToLive |
Specifies the maximum outermost label time-to-live value.
type=int
|
|
initialTimeToLive |
Specifies the initial outermost label time-to-live value.
This
enables bypassing the initial (often well known)
portion of a path.
type=int
|
|
curHopCount |
Reflects the current TTL value (range from 1 to 255) for
a 7x50 SR OAM Trace Route operation.
type=int
|
|
curProbeCount |
Reflects the current probe count (1..10) for a
7x50 SR OAM
Trace Route operation
type=int
|
|
diffServField |
type=int
|
|
virtualRouterId |
type=long
|
|
waitMilliSec |
type=int
|
|
destTcpUdpPort |
type=long
|
|
destUdpPortFixed |
type=boolean
|
|
protocol |
type=icmp.IcmpTraceProtocol
|
|
padSize |
type=int
|
|
testTargetType |
Specifies the target type of the pingtest. The
target may either be an Core Routing Instance, or VPRN Site.
type=sas.TestTarget
|
|
srplEndPointAddrType |
Specifies the type of IP address stored in tmnxOamIcmpTrCtlSrV6PyEndPtAdd.
The supported object combinations for 'icmpPing' tests are listed in
the tmnxOamIcmpTrCtlTable DESCRIPTION clause.
type=icmp.InetAddressType
|
|
srplEndPointAddr |
The Segment Routing (SR) policy endpoint address to be used for the SRPL test.
leave empty for non-SRPL tests.
type=InetAddress
|
|
srplPolicyColor |
specifies the Segment Routing (SR) policy color to be used for the test. A color associates an
SR policy with an intent (e.g. low latency).
type=long
|