| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| adminState |
Specifies the Admin State desired on the Ping Template Interface
type=icmp.ICMPTemplateAdminState default=3 Displayed(tab/group)=Admin State |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| currentInterval |
The value of the tmnxOamIfPingIfCurrentInterval indicates if the ping check interval being used
is the value of tmnxOamIfPingIfCtlInterval or tmnxOamIfPingIfCtlReactInt.
A value of 'interval' indicates the ping check is failed, waiting for a first success,
or that the ping check is Operational.
A value of reactivation indicates the ping check is recovering.
type=icmp.ICMPTemplateCurrentInterval access=read-only Displayed(tab/group)=Current Interval (Template/Ping Interface Details) |
| currentState |
The value of tmnxOamIfPingIfCurrentState indicates the current state of the ping checks,
this will be used to drive the interface operational state.
A value of 'operational' indicates the ping check succeeded, the interface is up.
A value of 'recovering' indicates the ping check is recovering using the reactivation interval.
A value of 'failed' indicates the ping check failed, the interface is down.
type=icmp.ICMPTemplateCurrentState access=read-only Displayed(tab/group)=Current State (Template/Ping Interface Details) |
| destAddrType |
Specifies the address type of ICMP Ping Template Interface
type=rtr.InetAddressType access=read-only default=ipv4 Displayed(tab/group)=Address Type |
| destAddress |
specifies a destAddress used as a destination address for a ICMP Template Interface
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Destination Address |
| dot1p |
"The value of dot1p specifies the values of the Ethernet dot1p bits in the outer and any
inner Ethernet header, when dot1q or qinq encapsulation is used.
The field is not exposed to egress QoS policy."
type=qos.Dot1pPriority access=read-only Displayed(tab/group)=Dot1P (Template/Ping Interface Details) |
| dscp |
The value of dscp specifies the DSCP to be carried in IP header of the ICMP echo request.
type=sas.DscpEnum access=read-only Displayed(tab/group)=DSCP (Template/Ping Interface Details) |
| failureThreshold |
The value of failureThreshold specifies a count that causes the transition of
the IP interface from operationally up to operationally down because of ping-template failure.
type=int access=read-only minimum=1 maximum=10 Displayed(tab/group)=Failure Threshold (Template/Ping Interface Details) |
| failureThresholdCount |
The value of failureThresholdCount indicates the count of
contiguous ping failures that are counting towards the
tmnxOamIfPingTmplCtlFailThrld when the interface is operationally up.
type=int access=read-only Displayed(tab/group)=Failure Threshold Count (Template/Ping Interface Details) |
| interval |
The value of interval specifies the packets transmit interval used
when the interface is operational.
type=int access=read-only minimum=1 maximum=60 units=seconds Displayed(tab/group)=Interval (Template/Ping Interface Details) |
| passedThresholdCount |
The value of passedThresholdCount indicates the count of
contiguous ping successes that are counting towards the
reactivationThreshold when the interface is operationally down.
type=int access=read-only Displayed(tab/group)=Passed Threshold Count (Template/Ping Interface Details) |
| reactivationFailThreshold |
The value of reactivationFailThreshold specifies the number of consecutive failures without previous successes, that must occur
transmitting at the reactivation interval before changing to the standard interval and subsequently waiting for the first success.
type=int access=read-only minimum=0 maximum=10 Displayed(tab/group)=Reactivation Fail Threshold (Template/Ping Interface Details) |
| reactivationInterval |
The value of reactivationInterval specifies the packets transmit interval
used when the IP interface is operationally down because of ping-template failure
and the previous ICMP echo request successfully received a response.
type=int access=read-only minimum=1 maximum=60 units=seconds Displayed(tab/group)=Reactivation Interval (Template/Ping Interface Details) |
| reactivationThreshold |
The value of reactivationThreshold specifies the number of consecutive successful ICMP
responses that triggers the interface from operationally down to operationally up.
type=int access=read-only minimum=1 maximum=10 Displayed(tab/group)=Reactivation Threshold (Template/Ping Interface Details) |
| reactivationTimeoutLost |
The value of reactivationTimeoutLost specifies the wait time before declaring the packet is lost.
type=int access=read-only minimum=1 maximum=60 units=seconds Displayed(tab/group)=Reactivation Timeout Lost (Template/Ping Interface Details) |
| size |
The value of size specifies the number of consecutive successful ICMP
responses that triggers the interface from operationally down to operationally up.
type=int access=read-only minimum=12 maximum=9786 units=bytes Displayed(tab/group)=Size (Template/Ping Interface Details) |
| templateName |
The value of templateName indicates the value of the ICMP Template object
for the ICMP Template entry used to ICMP Template Configuration.
type=string access=read-only |
| templatePointer |
The pointer to the Template Pointer used for the creation of the ICMP Ping Template Object.
type=Pointer access=read-create default= Mandatory on create Displayed(tab/group)=Template Pointer |
| timeOut |
The value of timeOut specifies the time the function will wait before declaring
an ICMP echo request packet is lost.
type=int access=read-only minimum=1 maximum=60 units=seconds Displayed(tab/group)=TimeOut (Template/Ping Interface Details) |
| ttl |
The value of ttl specifies the time to live setting in the ICMP ping packet
type=int access=read-only minimum=1 maximum=255 Displayed(tab/group)=Time to Live (Template/Ping Interface Details) |
| Properties inherited from rtr.VirtualInterfaceConfiguration |
|---|
| routerId, routerName, siteId, siteName, virtualInterfaceId, virtualInterfaceName |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7450 ESS | Supported from 20.10.R1 |
| 7750 SR | Supported from 20.10.R1 |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | Supported from 20.10.R1 |
| 7950 XRS | Supported from 20.10.R1 |