|
Values |
|
PeerDown |
value=1 |
package=msdp |
The alarm is raised when the Administrative State of a peer changes from Up to Down. The alarm clears when the Administrative State returns to Up. |
|
PeerDown |
value=1 |
package=bgp |
The alarm is raised when a BGP peer has an Operational State other than Up, and the Administrative State is Up. |
|
PeerDown |
value=1 |
package=gmplsuni |
The alarm is raised when the GMPLS peer's Administrative State is Up and the Operational State is Down. The alarm clears when the GMPLS peer's Operational State changes to Up or the Administrative State changes to Down. |
|
PeerConnectionDown |
value=2 |
package=bgp |
The alarm is raised when a BGP peer has a Connection State other than Established, and the Administrative State of the BGP peer is Up. |
|
PeerConnectionDown |
value=2 |
package=msdp |
The alarm is raised when the connectionState of this peer changes from Established to a state other than Established. The alarm clears when the connectionState of this peer returns to the Established state. |
|
PrefixLimitNearing |
value=3 |
package=bgp |
The alarm is raised when a BGP instance exceeds the threshold percentage of the configured maximum. |
|
PrefixLimitExceeded |
value=4 |
package=bgp |
The alarm is raised when a BGP instance learns the maximum number of peer routes. |
|
PeerGroupDown |
value=5 |
package=msdp |
The alarm is raised when the Administrative State of a peer group changes from Up to Down. The alarm clears when the Administrative State returns to Up. |
|
PeerGroupDown |
value=5 |
package=bgp |
The alarm is raised when a BGP peer group has an Operational State other than Up, and the Administrative State is Up. |
|
BgpDown |
value=6 |
package=bgp |
The alarm is raised when a BGP instance has an Operational State other than Up, and the Administrative State is Up. |
|
TemperatureThresholdCrossed |
value=7 |
package=equipment |
The alarm is raised when a temperature crosses a threshold. |
|
EquipmentRemoved |
value=8 |
package=equipment |
The alarm is raised when the compositeEquipmentState attribute has a value of equipmentMissing. |
|
EquipmentMismatch |
value=9 |
package=equipment |
The alarm is raised when the compositeEquipmentState attribute has a value of equipmentMismatch. |
|
EquipmentDown |
value=10 |
package=equipment |
The alarm is raised when the compositeEquipmentState attribute has a value of equipmentOperationallyDown. |
|
EquipmentInTest |
value=11 |
package=equipment |
The alarm is raised when equipment enters a diagnostic state. |
|
LinkDown |
value=12 |
package=equipment |
The alarm is raised when a port has no associated physical link or remote end point is operationally down. |
|
DeploymentFailure |
value=13 |
package=generic |
The alarm is raised when the NFM-P is unable to create, modify, or delete a network object because of NE unreachability or a failed SNMP set operation. The alarm information includes the deployment ID, the requesting user ID, and the deployment type. |
|
ThresholdCrossingAlarm |
value=14 |
package=tca |
The alarm is raised when a monitored object statistics-counter value exceeds a threshold value in the associated statistics policy. |
|
ThresholdCrossingAlarm |
value=14 |
package=generic |
The alarm is raised when a monitored object statistics-counter value exceeds a threshold value in the associated statistics policy. |
|
ThresholdCrossingAlarm |
value=14 |
package=netw |
The alarm is raised when a value crosses a configured rising or falling threshold. The alarm information includes the current threshold value, the default threshold value, and the threshold name. |
|
ThresholdCrossingAlarm |
value=14 |
package=sas |
The alarm is raised when node sends TCA trap. |
|
ThresholdCrossingAlarm |
value=14 |
package=equipment |
The alarm is raised when a port value crosses a threshold. |
|
ThresholdCrossingAlarm |
value=14 |
package=radioequipment |
The alarm is raised when a port value crosses a threshold. |
|
IsisDown |
value=19 |
package=isis |
The alarm is raised when an IS-IS site has an Operational State other than Up, and the Administrative State is Up. |
|
LagDown |
value=20 |
package=lag |
The alarm is raised when all ports in a LAG are operationally down. |
|
LdpInterfaceDown |
value=21 |
package=ldp |
The alarm is raised when an LDP interface is operationally down. |
|
LdpDown |
value=22 |
package=ldp |
The alarm is raised when an LDP site has an Operational State other than Up, and the Administrative State is Up. |
|
LdpTargetedPeerDown |
value=23 |
package=ldp |
The alarm is raised when an LDP targeted peer is operationally down. |
|
LspDown |
value=25 |
package=mpls |
The alarm is raised when the Operational State of an LSP is Down, but the Administrative State is Up. |
|
LspPathDown |
value=26 |
package=mpls |
The alarm is raised when an LSP path is operationally down. |
|
MplsDown |
value=27 |
package=mpls |
The alarm is raised when an MPLS site has an Operational State other than Up, and the Administrative State is Up. |
|
PathReoptimized |
value=28 |
package=mpls |
The alarm is raised when an MPLS path generates an mplsTunnelReoptimized trap. |
|
PathRerouted |
value=29 |
package=mpls |
The alarm is raised when an MPLS path generates an mplsTunnelRerouted trap. |
|
TunnelDown |
value=30 |
package=mpls |
The alarm is raised when an MPLS path has an Operational State other than Up, and the Administrative State is Up. |
|
TunnelDown |
value=30 |
package=svt |
The alarm is raised when the NFM-P detects that a service tunnel is operationally down. |
|
PollerProblem |
value=31 |
package=netw |
The alarm is raised when the NFM-P is unable to poll a network object, for example, because of intermittent or no IP connectivity to an NE, incorrect SNMP or Netconf security parameters, or disabled SNMP on the NE. |
|
NodeRebooted |
value=32 |
package=netw |
The alarm is raised when the NFM-P detects an NE reboot based on the latest NE sysUpTime value. |
|
TrapDestinationMisconfigured |
value=33 |
package=netw |
The alarm is raised when the NFM-P cannot be added to the NE's SNMP trap destinations. |
|
ManagementInterfaceProtectionSwitch |
value=34 |
package=netw |
The alarm is raised when an NE has in-band and out-of-band management interfaces and switches from one type of management to the other. |
|
BootParametersMisconfigured |
value=35 |
package=netw |
The alarm is raised when the SNMP Index Boot Status on an NE is not set to Persistent. |
|
InterfaceDown |
value=36 |
package=vprn |
The alarm is raised when the NFM-P detects that an interface is operationally down. |
|
InterfaceDown |
value=36 |
package=vpls |
The alarm is raised when an L2 management interface has an Operational State of Down, and the associated VPLS site has an Administrative State of Up. |
|
InterfaceDown |
value=36 |
package=netw |
The alarm is raised when an interface or underlying resource fails, as indicated by an interface compositeState attribute value of failed or underlyingResourceFailed. |
|
InterfaceDown |
value=36 |
package=service |
The alarm is raised when the NFM-P detects that a redundant interface is operationally down. |
|
FrameSizeProblem |
value=37 |
package=netw |
The alarm is raised when a provisioned MTU size value is greater than the supported MTU size value. |
|
FrameSizeProblem |
value=37 |
package=service |
The alarm is raised when a provisioned MTU size value is greater than the supported MTU size value. |
|
FrameSizeProblem |
value=37 |
package=svt |
The alarm is raised when a provisioned MTU size value is greater than the supported MTU size value. |
|
AreaTypeMismatch |
value=38 |
package=ospf |
The alarm is raised when an OSPF area on one NE is configured as an NSSA and the same OSPF area on another NE is configured as a stub area. |
|
InterfaceHelloConfig |
value=39 |
package=ospf |
The alarm is raised when an NE receives a hello packet on a non-virtual interface from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
InterfaceDbDescriptConfig |
value=40 |
package=ospf |
The alarm is raised when an NE receives a dbDescript packet on a non-virtual interface from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
InterfaceLsReqConfig |
value=41 |
package=ospf |
The alarm is raised when an NE receives an lsReq packet on a non-virtual interface from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
InterfaceLsUpdateConfig |
value=42 |
package=ospf |
The alarm is raised when an NE receives an lsUpdate packet on a non-virtual interface from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
InterfaceLsAckConfig |
value=43 |
package=ospf |
The alarm is raised when an NE receives an lsAck packet on a non-virtual interface from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
InterfaceNullPacketConfig |
value=44 |
package=ospf |
The alarm is raised when an NE receives a null packet on a non-virtual interface from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
InterfaceHelloAuthFailure |
value=45 |
package=ospf |
The alarm is raised when an NE receives a hello packet on a non-virtual interface from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
InterfaceDbDescriptAuthFailure |
value=46 |
package=ospf |
The alarm is raised when an NE receives a dbDescript packet on a non-virtual interface from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
InterfaceLsReqAuthFailure |
value=47 |
package=ospf |
The alarm is raised when an NE receives an lsReq packet on a non-virtual interface from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
InterfaceLsUpdateAuthFailure |
value=48 |
package=ospf |
The alarm is raised when an NE receives an lsUpdate packet on a non-virtual interface from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
InterfaceLsAckAuthFailure |
value=49 |
package=ospf |
The alarm is raised when an NE receives an lsAck packet on a non-virtual interface from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
InterfaceNullPacketAuthFailure |
value=50 |
package=ospf |
The alarm is raised when an NE receives a null packet on a non-virtual interface from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
InterfaceRxBadPacket |
value=51 |
package=ospf |
The alarm is raised when an NE cannot parse an OSPF packet that it receives on a non-virtual interface. |
|
LsdbOverflow |
value=53 |
package=ospf |
The alarm is raised when the number of received external LSAs exceeds the configured number allowed. By default, there is no limit. The alarm information includes the configured LSDB limit and one of the following LSDB overflow states:
-
0, which means no overflow
-
1, which means nearing limit
-
2, which means limit exceeded
|
|
VirtualLinkHelloConfig |
value=54 |
package=ospf |
The alarm is raised when an NE receives a hello packet on a virtual link from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
VirtualLinkDbDescriptConfig |
value=55 |
package=ospf |
The alarm is raised when an NE receives a dbDescript packet on a virtual link from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
VirtualLinkLsReqConfig |
value=56 |
package=ospf |
The alarm is raised when an NE receives an lsReq packet on a virtual link from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
VirtualLinkLsUpdateConfig |
value=57 |
package=ospf |
The alarm is raised when an NE receives an lsUpdate packet on a virtual link from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
VirtualLinkLsAckConfig |
value=58 |
package=ospf |
The alarm is raised when an NE receives an lsAck packet on a virtual link from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
VirtualLinkNullPacketConfig |
value=59 |
package=ospf |
The alarm is raised when an NE receives a null packet on a virtual link from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
VirtualLinkHelloAuthFailure |
value=60 |
package=ospf |
The alarm is raised when an NE receives a hello packet on a virtual link from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
VirtualLinkDbDescriptAuthFailure |
value=61 |
package=ospf |
The alarm is raised when an NE receives a dbDescript packet on a virtual link from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
VirtualLinkLsReqAuthFailure |
value=62 |
package=ospf |
The alarm is raised when an NE receives an lsReq packet on a virtual link from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
VirtualLinkLsUpdateAuthFailure |
value=63 |
package=ospf |
The alarm is raised when an NE receives an lsReq packet on a virtual link from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
VirtualLinkLsAckAuthFailure |
value=64 |
package=ospf |
The alarm is raised when an NE receives an lsAck packet on a virtual link from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
VirtualLinkNullPacketAuthFailure |
value=65 |
package=ospf |
The alarm is raised when an NE receives a null packet on a virtual link from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
VirtualLinkRxBadPacket |
value=66 |
package=ospf |
The alarm is raised when an NE cannot parse an OSPF packet that it receives on a virtual interface. |
|
GroupDown |
value=69 |
package=rip |
The alarm is raised when a RIP group has an Operational State other than Up, and the Administrative State is Up. |
|
RipAuthenticationFailure |
value=70 |
package=rip |
The alarm is raised when a peer authentication failure occurs. The alarm information includes the peer address. |
|
RipAuthenticationMismatch |
value=71 |
package=rip |
The alarm is raised when a peer authentication mismatch occurs. The alarm indicates the peer address. |
|
RipDown |
value=72 |
package=rip |
The alarm is raised when a RIP site has an Operational State other than Up, and the Administrative State is Up. |
|
SessionDown |
value=73 |
package=rsvp |
The alarm is raised when an RSVP session is operationally down. |
|
RsvpDown |
value=74 |
package=rsvp |
The alarm is raised when an RSVP site has an Operational State other than Up, and the Administrative State is Up. |
|
MediationAuthenticationFailure |
value=75 |
package=security |
The alarm is raised when a mediation authentication failure occurs. This alarm is in some cases automatically cleared when mediation is restored for nodes that use the same mediation policy for read, write and trap access. |
|
MediationAuthenticationFailure |
value=75 |
package=snmp |
The alarm is raised when an NE has no associated NFM-P mediation policy. |
|
ManagementAccessFilterMisconfigured |
value=76 |
package=sitesec |
The alarm is raised when a MAF is misconfigured. |
|
LossOfClock |
value=83 |
package=sonetequipment |
The alarm is raised when a SONET port reports an LOC condition, which causes the NE to set the port Operational State to Down. |
|
LineAlarmIndicationSignal |
value=84 |
package=sonetequipment |
The alarm is raised when a SONET port reports an LAIS error. The alarm corresponds to the lais alarm on an NE. |
|
LineRemoteDefectIndication |
value=85 |
package=sonetequipment |
The alarm is raised when a SONET port reports a line remote defect indication error caused by an LOF, LOC, or LOS condition. The alarm corresponds to the lrdi alarm on an NE. |
|
SectionS1Failure |
value=86 |
package=sonetequipment |
The alarm is raised when a SONET port reports a section synchronization failure. A section synchronization failure occurs when the S1 byte is inconsistent for eight consecutive frames. |
|
SectionB1Error |
value=87 |
package=sonetequipment |
The alarm is raised when a SONET port reports a section error condition that a remote NE raises because of b1 errors received from the local NE. The alarm corresponds to the lrei alarm on an NE. |
|
BerLineSignalDegradation |
value=88 |
package=sonetequipment |
The alarm is raised when a SONET port reports a line signal degradation BER error. The alarm corresponds to the lb2er-sd alarm on an NE. |
|
BerLineSignalFailure |
value=89 |
package=sonetequipment |
The alarm is raised when a SONET port reports a line signal degradation BER error. The alarm corresponds to the lb2er-sf alarm on an NE. |
|
SectionLossOfFrame |
value=90 |
package=sonetequipment |
The alarm is raised when a SONET port reports a SLOF error. The alarm corresponds to the slof alarm on an NE. |
|
SectionLossOfSignal |
value=91 |
package=sonetequipment |
The alarm is raised when a SONET port reports a SLOS error. The alarm corresponds to the slos alarm on an NE. |
|
TxSectionSynchronizationError |
value=92 |
package=sonetequipment |
The alarm is raised when a SONET port reports an SS1F error. The alarm corresponds to the ss1f alarm on an NE. |
|
RxSectionSynchronizationError |
value=93 |
package=sonetequipment |
The alarm is raised when a SONET port reports a section synchronization failure. A section synchronization failure occurs when the S1 byte is inconsistent for eight consecutive frames. |
|
LineErrorCondition |
value=94 |
package=sonetequipment |
The alarm is raised when a SONET port reports a line error condition that a remote NE raises because of b1 errors received from the local NE. The alarm corresponds to the lrei alarm on an NE. |
|
TopologyMisconfigured |
value=95 |
package=service |
This alarm is raised when service sites are not fully connected. |
|
TypeMismatch |
value=96 |
package=service |
The alarm is raised when a VLAN type for a Site doesn't match what has been configured on the Service. |
|
ServiceSiteDown |
value=97 |
package=service |
The alarm is raised when all SAPs on a site are operationally down, or when the service tunnels for the site are operationally down. For Backhaul Sites, this alarm is raised when one or more Backhaul Adjacencies is operationally down. |
|
LabelProblem |
value=98 |
package=svt |
The alarm is raised when an ingress or an egress label is missing. |
|
KeepAliveProblem |
value=100 |
package=svt |
The alarm is raised when the NFM-P detects a keep-alive protocol status of senderIdInvalid or responderIdError. |
|
BootEnvironmentSyncFailed |
value=101 |
package=sw |
The alarm is raised when the synchronization of one or more system initialization files between the active and standby CPM cards fails, or when one or both of the CSM compact flash devices do not have enough space when the 'admin redundancy synchronize boot-env' command is executed, or when the node is rebooted. |
|
ConfigFileSyncFailed |
value=102 |
package=sw |
The alarm is raised when the configuration file synchronization between the active and standby CPM cards fails. |
|
BootableConfigBackupFailed |
value=103 |
package=sw |
The alarm is raised when the NFM-P fails to back up a set of NE configuration files. |
|
BootableConfigRestoreFailed |
value=104 |
package=sw |
The alarm is raised when the NFM-P fails to restore a set of NE configuration files. |
|
SaveConfigFailed |
value=105 |
package=sw |
The alarm is raised when the admin save command on an NE fails. |
|
SoftwareUpgradeFailed |
value=106 |
package=sw |
The alarm is raised when an NE software upgrade using the NFM-P fails. |
|
SoftwareBootFailure |
value=107 |
package=sw |
The alarm is raised when an NE fails to boot because of a software problem. |
|
HardwareBootFailure |
value=108 |
package=sw |
The alarm is raised when an NE fails to boot because of a hardware problem. |
|
SoftwareDownloading |
value=109 |
package=sw |
The alarm is raised when an NE begins to download software to a IOM or CPM card. |
|
SoftwareInitializing |
value=110 |
package=sw |
The alarm is raised when software initialization on an IOM or CPM card begins. |
|
SoftwareInitialized |
value=111 |
package=sw |
The alarm is raised when software initialization on an IOM or CPM card completes. |
|
DS1E1AlarmIndicationSignal |
value=112 |
package=tdmequipment |
The alarm is raised when an NE reports that a specific DS1 or E1 channel has an AIS alarm condition. |
|
DS1E1ResourceAvailabilityIndicator |
value=114 |
package=tdmequipment |
The alarm is raised when an NE reports that a specific DS1 or E1 channel has an RAI alarm condition. |
|
DS3E3AlarmIndicationSignal |
value=115 |
package=tdmequipment |
The alarm is raised when an NE reports that a specific DS3 or E3 channel has an AIS alarm condition. |
|
DS3E3LossOfSignal |
value=116 |
package=tdmequipment |
The alarm is raised when an NE reports that a specific DS3 or E3 channel has an LOS alarm condition. |
|
DS3E3OutOfFrame |
value=117 |
package=tdmequipment |
The alarm is raised when an NE reports that a specific DS3 or E3 channel has an OOF alarm condition. |
|
UndefinedSchedulerReference |
value=118 |
package=vs |
The alarm is raised when a queue specified in the access ingress or access egress policy of an L2 access interface is not referenced by the scheduler policy for the interface. |
|
DS3E3ResourceAvailability |
value=119 |
package=tdmequipment |
The alarm is raised when an NE reports that a specific DS3 or E3 channel has an RAI alarm condition. |
|
DS3E3Looped |
value=120 |
package=tdmequipment |
The alarm is raised when an NE reports that a specific DS3 or E3 channel has a remote loopback alarm condition. |
|
NeighborDown |
value=121 |
package=rsvp |
This alarm is raised when a RSVP Interface Neighbor changes to inactive state. The alarm will be cleared when the Neighbor moves to active state. |
|
VirtualLinkDown |
value=122 |
package=ospf |
The alarm is raised when a virtual link is Down. |
|
VirtualNeighborDown |
value=123 |
package=ospf |
The alarm is raised when a neighbor virtual link is operationally down. |
|
DS1E1LossOfSignal |
value=124 |
package=tdmequipment |
The alarm is raised when an NE reports that a specific DS1 or E1 channel has an LOS alarm condition. |
|
DS1E1OutOfFrame |
value=125 |
package=tdmequipment |
The alarm is raised when an NE reports that a specific DS1 or E1 channel has an OOF alarm condition. |
|
DS1E1Looped |
value=126 |
package=tdmequipment |
The alarm is raised when an NE reports that a specific DS1 or E1 channel has a remote loopback alarm condition. |
|
LicensedLimitExceeded |
value=127 |
package=security |
The alarm is raised when the license items in the network exceeds 100 percent of the license capacity. |
|
AuthenticationFailure |
value=128 |
package=security |
The alarm is raised when a configurable number of attempts to log in to a NFM-P client fail. The alarm information includes the user name. The NFM-P will clear the alarm upon a successful user login or account deletion. |
|
SonetPathAlarmIndicationSignal |
value=129 |
package=sonetequipment |
The alarm is raised when a SONET port reports a PAIS error. The alarm corresponds to the pais alarm on an NE. |
|
SonetPathLossOfPointer |
value=130 |
package=sonetequipment |
The alarm is raised when a SONET port reports a PLOP error. The alarm corresponds to the plop alarm on an NE. |
|
SonetPathRemoteDefectIndication |
value=131 |
package=sonetequipment |
The alarm is raised when a SONET port reports a remote PAIS error. The alarm corresponds to the pais alarm on an NE. |
|
SonetPathB3Error |
value=132 |
package=sonetequipment |
The alarm is raised when a SONET port reports a path error condition because of b3 errors. The alarm corresponds to the prei alarm on an NE. |
|
SonetPathPayloadMismatch |
value=133 |
package=sonetequipment |
The alarm is raised when a SONET port reports a PPLM error on a channel, after which the channel is set operationally down. The alarm corresponds to the pplm alarm on an NE. |
|
SonetPathRemoteB3Error |
value=134 |
package=sonetequipment |
The alarm is raised when a SONET port reports a path error condition that a remote NE raises because of b3 errors received from the local NE. The alarm corresponds to the prei alarm on an NE. |
|
TrapMalformed |
value=135 |
package=netw |
The alarm is raised when the number of varbinds in an incoming SNMP trap is fewer than the number expected. |
|
DatabaseBackupFailed |
value=136 |
package=db |
The alarm is raised when the database backup files cannot be created because of, for example, a lack of disk space or insufficient file permissions. |
|
OutOfBandManagementConnectionDown |
value=138 |
package=netw |
The alarm is raised when the NFM-P cannot reach a managed NE using the ping function over an out-of-band connection. |
|
InBandManagementConnectionDown |
value=139 |
package=netw |
The alarm is raised when the NFM-P cannot reach a managed NE using the ping function over an in-band connection. |
|
StandbyCPMManagementConnectionDown |
value=140 |
package=netw |
The alarm is raised when the NFM-P cannot reach a managed NE using the ping function. |
|
OspfInterfaceDown |
value=141 |
package=ospf |
The alarm is raised when an OSPF interface is operationally down. |
|
RouteDistinguisherNotConfigured |
value=142 |
package=l3fwd |
The alarm is raised when no RD is configured for an L3 service site. |
|
SonetPathUnequippedPathError |
value=143 |
package=sonetequipment |
The alarm is raised when a SONET port reports a path unequipped error. The alarm corresponds to the Path Alarm Unequipped Path Error alarm on an NE. |
|
DiskCapacityProblem |
value=144 |
package=equipment |
The alarm is raised when a compact flash capacity threshold value on an NE is reached or exceeded. The alarm condition is detected during resynchronization or when a tnmxEqFlashDiskFull trap is received. The threshold value is not configurable. The severity of the alarm depends on the percentage of disk capacity used, as listed below:
-
75 percent, Minor
-
90 percent, Major
-
100 percent, Critical
|
|
EquipmentFailure |
value=145 |
package=equipment |
The alarm is raised when a I/O card or control processor or power-supply tray reports a failure. When the object type is ControlProcessor, a CPM may be unable to boot. When the object type is Power Supply Tray and the alarm is raised during device discovery, a power-supply tray may be out of service. When the object type is a Power Supply Tray and the device is in the managed state, a power-supply tray may be out of service or the AC power shelf has a fault condition. The alarm clears when the status changes to OK. |
|
FirmwareMismatchAlarm |
value=146 |
package=equipment |
The alarm is raised when a device detects a mismatch between the firmware version and the device software image. The alarm information includes the expected firmware version. |
|
HardwareRedundancyAlarm |
value=147 |
package=equipment |
The alarm is raised when the primary CPM fails. |
|
DataLossAlarm |
value=148 |
package=equipment |
The alarm is raised when a device detects an error while writing to a compact flash unit. |
|
DataLossAlarm |
value=148 |
package=sw |
The alarm is raised when the NFM-P receives the tmnxLogAccountingDataLoss trap, which is sent when a statistics collection interval ends while an NE is writing data to an accounting file. The statistics collection for the interval stops immediately, and collection for the next interval begins. The accounting statistics file for the interrupted collection contains an incomplete data set as a result. |
|
SoftwareFailureAlarm |
value=149 |
package=equipment |
The alarm is raised when the CPM fails to load the software from the specified location. The alarm information includes the software location. |
|
BundleDown |
value=152 |
package=bundle |
The alarm is raised when the bundle Administrative State is Up and the Operational State is Down. |
|
IsisAdjacencyDown |
value=153 |
package=isis |
The alarm is raised when an IS-IS interface has no adjacencies or adjacency state is not up, for example, because the IS-IS protocol on the remote site is down. |
|
IsisAuthTypeFailure |
value=154 |
package=isis |
The alarm is raised when IS-IS receives a PDU that contains the wrong authentication type. |
|
IsisAuthFailure |
value=155 |
package=isis |
The alarm is raised when IS-IS receives a PDU that contains incorrect authentication information. |
|
IsisAreaMismatch |
value=156 |
package=isis |
The alarm is raised when IS-IS receives a Hello PDU from an IS with which it does not share an area address. |
|
IsisManualAddressDrops |
value=157 |
package=isis |
The alarm is raised when a manual area address assigned to an IS is ignored during a route computation. |
|
IgmpDown |
value=158 |
package=igmp |
The alarm is raised when an IGMP site has an Operational State other than Up, and the Administrative State is Up. |
|
QueryVerMismatch |
value=159 |
package=igmp |
The alarm is raised when an interface configured for IGMPv3 receives a query message for an earlier IGMP version. The interface subsequently enters an IGMP mode that is compatible with the earlier version. The alarm information includes the IGMP version on the interface and the IGMP version of the received query. |
|
CModeRxQueryMismatch |
value=160 |
package=igmp |
The alarm is raised when an IGMP interface receives an IGMP query of a higher version than the version configured on the interface, for example, when the interface is configured for IGMPv1 and it receives an IGMPv2 or IGMPv3 query. The interface does not process the received IGMP message. |
|
IgmpSnoopingDown |
value=161 |
package=layer2 |
The alarm is raised when IGMP snooping is disabled on an NE and a TLS VLAN or MVR VLAN service is provisioned on the NE. |
|
MvrSiteDown |
value=162 |
package=layer2 |
The alarm is raised when MVR is disabled on an NE and a TLS VLAN or MVR VLAN service is provisioned on the NE. |
|
TlsSiteDown |
value=163 |
package=layer2 |
The alarm is raised when MVR is disabled on an NE and a TLS VLAN or MVR VLAN service is provisioned on the NE. |
|
ForwardingTableSizeLimitReached |
value=164 |
package=l2fwd |
The alarm is raised when the number of MAC address entries in the FIB reaches or exceeds the VPLS site high watermark specified by l2fwd.SiteFib.highWatermark. The alarm clears when the number of MAC address entries in the FIB drops below the VPLS site low watermark specified by l2fwd.SiteFib.lowWatermark. The alarm can be raised against a VPLS site, L2 access interface, or spoke SDP binding. |
|
CorruptImageFile |
value=171 |
package=mediation |
The alarm is raised when one or more files in the NFM-P software image specified for a device software upgrade is invalid, corrupt or absent. The NFM-P validates a device software file set before it imports the file set and distributes it to an NE. Ensure that the file set downloads properly to the NE and is not tampered with before you re-attempt the upgrade. The alarm clears when a valid file set is on the NE and the NFM-P activates the software image in the file set. |
|
NodeColdStart |
value=172 |
package=netw |
The alarm is raised when the NFM-P receives a SNMPv2-MIB.coldStart trap from an NE. |
|
PersistentIndexParametersMisconfigured |
value=173 |
package=netw |
The alarm is raised when persistence is set to Off in the NE BOF. |
|
UpgradedBuildVersionMismatch |
value=174 |
package=netw |
The alarm is raised when the software version that an NE reports after a software upgrade does not match the version of the software used for the upgrade. |
|
SnmpDaemonProblem |
value=175 |
package=netw |
The alarm is raised when one of the following occurs:
-
The NFM-P receives an unexpected response to an SNMP request, for example, when a managed NE sends the wrong object in response to an SMNP get or get-next request.
-
The NFM-P receives the TIMETRA-SYSTEM-MIB.tmnxSnmpdError trap from a managed NE.
|
|
SnmpAuthenticationFailure |
value=176 |
package=netw |
The alarm is raised when an NE SNMP agent has received an SNMP message that is not properly authenticated. An NE typically does not, by default, send the notification that generates the alarm; the notification must be manually enabled through CLI. |
|
NodeVersionMismatch |
value=177 |
package=netw |
The alarm is raised when the software version on an NE differs from the version recorded for the NE in the NFM-P database. |
|
NodeUpgraded |
value=178 |
package=netw |
The alarm is raised when the NFM-P detects an NE software version upgrade. |
|
SnmpTrapDropped |
value=179 |
package=netw |
The alarm is raised when the NFM-P receives a tmnxTrapDropped notification from an NE to indicate that the NE has dropped a trap. As a result, the NFM-P resynchronizes the table associated with the dropped trap. |
|
ModuleOutOfMemory |
value=180 |
package=netw |
The alarm is raised when the available NE memory is insufficient for allocation to a task. |
|
RedundancySwitchover |
value=181 |
package=netw |
The alarm is raised when a NFM-P main server receives a CPMSwitchover trap from an NE, which indicates that the standby CPM detects an active CPM failure and is preparing to take over as the new active CPM. |
|
ActivitySwitch |
value=182 |
package=netw |
The alarm is raised when a NFM-P main server activity switch occurs. |
|
PimDown |
value=184 |
package=pim |
The alarm is raised when a PIM site is administratively Up but operationally Down. The alarm is cleared when the PIM site becomes operationally Up but administratively Down. |
|
InvalidJoinPrune |
value=185 |
package=pim |
The alarm is raised when the RP address in a Join Prune message is not the RP for the group specified in the message. |
|
InvalidRegister |
value=186 |
package=pim |
The alarm is raised when the RP address in a Register message is not the RP for the group specified in the message. |
|
GroupInSSMRange |
value=187 |
package=pim |
The alarm is raised when an NE receives a PIM register, PIM (*,G) assert, PIM (*,G) join/prune, or an IGMP local membership message for a group defined in the SSM address range. |
|
NeighborLoss |
value=188 |
package=vpls |
The alarm is raised when the NFM-P detects a loss of connection to a PIM neighbor. |
|
NeighborLoss |
value=188 |
package=pim |
The alarm is raised when the connection to a neighbor is lost. |
|
TemplateInconsistency |
value=189 |
package=policy |
The alarm is raised when there is a parameter type or value mismatch between a global policy and a local policy. |
|
MFibTableSizeLimitReached |
value=190 |
package=vpls |
The alarm is raised when the NFM-P receives a svcTlsMfibTableFullAlarmRaised trap for a VPLS site. The alarm clears when the NFM-P receives a svcTlsMfibTableFullAlarmCleared trap for the site. |
|
PrimaryImageBootFailure |
value=191 |
package=sw |
The alarm is raised when the primary software image specified in an NE BOF is unusable. |
|
DependentObjectDeleted |
value=192 |
package=template |
The alarm is raised when an object referenced by a template cannot be found. The alarm is deprecated in the NFM-P, Release 6.0 and later. |
|
ChildTemplateInvalid |
value=193 |
package=template |
The alarm is raised when a child template in a template binding is invalid. The alarm is deprecated in the NFM-P, Release 6.0 and later. |
|
ParentTemplateInvalid |
value=194 |
package=template |
The alarm is raised when a parent template in a template binding is invalid. The alarm is deprecated in the NFM-P, Release 6.0 and later. |
|
BackupDiskSpaceBelowThreshold |
value=195 |
package=db |
The alarm is raised when the primary or standalone database backup disk space threshold specified in the nms-server.xml file is reached. |
|
DataFileDiskSpaceBelowThreshold |
value=196 |
package=db |
The alarm is raised when the primary or standalone database data file disk space threshold specified in the nms-server.xml file is reached. |
|
ArchiveLogDiskSpaceBelowThreshold |
value=197 |
package=db |
The alarm is raised when the primary or standalone database archived log disk space threshold specified in the nms-server.xml file is reached. |
|
OldArchiveLogsDeleted |
value=198 |
package=db |
The alarm is raised when the NFM-P deletes the applied archive logs because database disk space is low. In a standalone deployment, the NFM-P deletes all archive logs. In a redundant deployment, the NFM-P deletes the applied archive logs, and can raise the alarm against the primary or standby database. |
|
AllArchiveLogsDeleted |
value=199 |
package=db |
The alarm is raised when the NFM-P deletes all database archive logs because it requires more disk space. When database disk space is low, the NFM-P first deletes the archive logs that have been applied to the standby database and raises the OldArchiveLogsDeleted alarm. If deleting the applied archive logs does not free up sufficient disk space, the NFM-P deletes the remaining archive logs, which creates an archive log gap that requires a standby database reinstantiation to correct. The alarm is raised only in a redundant NFM-P system. |
|
UnableDeleteArchivedLogs |
value=200 |
package=db |
The alarm is raised when database disk space is low and the NFM-P is unable to delete the archive logs. |
|
DBFailOver |
value=201 |
package=db |
The alarm is raised when a database failover occurs. A standby database reinstantiation is required. The alarm clears when the standby database is online. |
|
TwoPrimaryDatabase |
value=202 |
package=db |
The alarm is raised when the standby database initializes as a primary database because of a database failover. The alarm clears when the original primary database is operational as the new standby database. |
|
SwitchOverDatabase |
value=203 |
package=db |
The alarm is raised when a database switchover occurs. |
|
SwitchOverDatabaseFailed |
value=204 |
package=db |
The alarm is raised when a database switchover fails. |
|
DatabaseArchivedLogNotApplied |
value=205 |
package=db |
The alarm is raised when, during a database backup, the NFM-P determines that the archive logs are not being applied to the standby database, as indicated by the archive log gap. The archive log gap threshold is defined in the nms-server.xml file. The alarm is raised only in a redundant NFM-P system. |
|
MaxNumMcastRoutes |
value=206 |
package=l3fwd |
The alarm is raised when the number of multicast routes in a VPRN exceeds the configured maximum. |
|
McastRoutesMidLevelThresholdReached |
value=207 |
package=l3fwd |
The alarm is raised when the number of multicast routes in a VPRN exceeds the configured threshold value. The alarm information includes the number of multicast routes and the threshold value. |
|
StandbyServerStatus |
value=208 |
package=netw |
The alarm is raised when the primary NFM-P main server cannot communicate with the NFM-P standby main server. The alarm clears when communication between the servers is restored. |
|
MirrorDestinationMisconfigured |
value=209 |
package=mirror |
The alarm is raised when more than two destination Sites are configured for a service mirror. |
|
CcagDown |
value=210 |
package=ccag |
The alarm is raised when the CCAG Administrative State is Up and the Operational State is Down. |
|
DefaultInstanceInconsistency |
value=211 |
package=policy |
The alarm is raised when an accounting policy is the default for more then one service type or more then one network type. |
|
FirmwareUpgradeAlarm |
value=212 |
package=equipment |
The alarm is raised when a device automatically upgrades the firmware of a hot-inserted IOM or CPM. |
|
IfVlanSubTypeConflict |
value=213 |
package=vlan |
The alarm is raised when more than one type of VLAN service is configured with the same VLAN ID. The alarm is raised against an L2 access interface. |
|
IsisRejectedAdjacency |
value=214 |
package=isis |
The alarm is raised when the NFM-P receives a vRtrIsisRejectedAdjacency trap, which indicates that an adjacency cannot be established in response to a Hello PDU from an IS because of a lack of resources. |
|
ManagementVlanConflict |
value=215 |
package=vlan |
The alarm is raised when a management VLAN ID is in use by another service type. |
|
MemoryConsumption |
value=216 |
package=netw |
The alarm is raised when one of the following occurs.
-
The number of traps from a particular NE that await processing by the NFM-P surpasses the NE red threshold for trap memory management in the NFM-P server configuration.
-
The global number of traps that await processing by the NFM-P surpasses the yellow threshold for trap memory management in the NFM-P server configuration. Caution: Nokia strongly recommends against modifying NE trap management threshold values; modifying these values can seriously degrade NFM-P performance. The alarm clears when one of the following occurs.
-
The number of traps from the NE that await processing falls below the NE red threshold.
-
The global number of traps that await processing falls below the system yellow threshold. The NE is resynchronized only if required.
|
|
MirrorEncapsulationTypeInconsistent |
value=217 |
package=mirror |
The alarm is raised when the encapsulation types of the mirror sites differ. |
|
MissSpokeConfiguration |
value=218 |
package=vpls |
The alarm is raised when the NFM-P detects a spoke SDP binding between two sites in one M-VPLS or VPLS. The alarm is not raised by the NFM-P, Release 4.0 or later. |
|
MvrConfiguredFromVplsNotExist |
value=219 |
package=vpls |
The alarm is raised when an MVR source is an MVR VPLS that does not exist. The alarm clears when the MVR VPLS is created. |
|
MvrConfiguredProxySapNotExist |
value=220 |
package=vpls |
The alarm is raised when a configured MVR proxy SAP does not exist. The alarm clears when the proxy SAP is created. |
|
SdpBindingDown |
value=221 |
package=svt |
The alarm is raised when an SDP binding has an Operational State other than Up. |
|
SdpBindingTunnelDown |
value=222 |
package=svt |
The alarm is raised when an SDP binding tunnel has an Operational State other than Up. |
|
SiteManagementVlanConflict |
value=223 |
package=vlan |
The alarm is raised when the management VLAN ID is used for another type of service. |
|
SiteVlanSubTypeConflict |
value=224 |
package=vlan |
The alarm is raised when more than one type of VLAN service has the same VLAN ID. The alarm is raised against a site. |
|
SystemMemoryConsumption |
value=225 |
package=netw |
The alarm is raised when the global number of SNMP traps that await processing by the NFM-P surpasses the system red threshold for trap memory management specified in the base configuration of the NFM-P server. Caution: Nokia strongly recommends against modifying NE trap management threshold values; modifying these values can seriously degrade NFM-P performance. The alarm clears when the number of traps that await processing falls below the system red threshold. The NFM-P resynchronizes the NEs, if required. |
|
ThresholdCrossingAlarmDbl |
value=226 |
package=generic |
The alarm is raised when a value crosses a configured rising or falling threshold. The alarm information includes the current threshold value, the default threshold value, and the threshold name. |
|
VlanSubTypeConflict |
value=227 |
package=vlan |
The alarm is raised when more than one type of VLAN service has the same VLAN ID. The alarm is raised against a service. |
|
SystemNameChange |
value=228 |
package=netw |
The alarm is raised when an NE undergoes a system name change. The alarm information includes the old system name and the new system name. |
|
DuplicateVrfPolicy |
value=229 |
package=l3fwd |
The alarm is raised when the NFM-P detects a duplicate VRF policy in a VPRN. The alarm information includes the VRF policy ID and type, and information about the service site. Note: starting from SAM 12.0 R1, NFM-P no longer raise this alarm since it is not much useful but has performance issue. |
|
DuplicateVrfTarget |
value=230 |
package=l3fwd |
The alarm is raised when the NFM-P detects a duplicate VRF target in a VPRN. The alarm information includes the VRF policy ID and type, and information about the service site. |
|
ExportPolicyNotFound |
value=231 |
package=l3fwd |
The alarm is raised when a VRF export policy for a VPRN cannot be found. The alarm information includes the policy ID. Note: starting from SAM 12.0 R1, NFM-P no longer raise this alarm since it is not much useful but has performance issue. |
|
ImportPolicyNotFound |
value=232 |
package=l3fwd |
The alarm is raised when a VRF import policy for a VPRN cannot be found. The alarm information includes the policy ID. Note: starting from SAM 12.0 R1, NFM-P no longer raise this alarm since it is not much useful but has performance issue. |
|
PhysicalLinkPortsMisconfigured |
value=239 |
package=netw |
The alarm is raised when there is an MTU size mismatch between a link endpoint and a port. The alarm clears when the MTUs match. |
|
PollDeadlineMissed |
value=240 |
package=netw |
The alarm is raised when a NFM-P server cannot finish browsing a statistics MIB before a polling interval expires. |
|
RedAlarmThresholdReached |
value=241 |
package=netw |
The alarm is raised when the number of outstanding NFM-P alarms reaches the critical threshold. When this happens, the NFM-P discards alarms to keep the number below the threshold. |
|
ReachabilityProblem |
value=243 |
package=netw |
The alarm is raised when a mediation poll of the SysUpTimeAlarm object on an NE fails, for example, because of network congestion or because the NE is too busy to respond. The probable cause is an unreachable NE Mediation agent on the NE. The polling interval depends on the NE type and is configurable in nms-server.xml. By default, the NFM-P polls a managed NE every four minutes. If a poll fails, the alarm is raised. The alarm clears when the NFM-P receives a response from the NE, and the NFM-P GUI icon that represents the NE turns from red to green. |
|
StatsRetrieveFailed |
value=244 |
package=sw |
The alarm is raised when the NFM-P main or auxiliary server cannot transfer an accounting file from an NE. |
|
YellowAlarmThresholdReached |
value=245 |
package=netw |
The alarm is raised when the number of outstanding NFM-P alarms reaches the yellow threshold. When this happens, the NFM-P discards non-critical alarms to keep the number below the threshold. |
|
DatabaseRedundancyFailure |
value=246 |
package=db |
The alarm is raised when the NFM-P detects a standby database problem, for example, the database is down or not in managed recovery mode. The alarm clears when the standby database is functional. The alarm is raised only in a redundant NFM-P system. |
|
SonetPathLossOfCodegroupDelineationError |
value=248 |
package=sonetequipment |
The alarm is raised when a SONET port reports a PLCD error. The alarm corresponds to the plcd alarm on an NE. |
|
AccessInterfaceDown |
value=249 |
package=service |
The alarm is raised when an L2 or L3 interface operational state is Down. The alarm is not raised against an L2 access interface that is associated with an MC ring or MC LAG in the standby state. |
|
EncapsulationTypeIncompatible |
value=250 |
package=vll |
The alarm is raised when the encapsulation types of two SAPs in the same Ipipe are mismatched. |
|
CeAddressIncompatible |
value=251 |
package=ipipe |
The alarm is raised when two SAPs in an Ipipe have the same CE IP address, or when the CE IP address is not the same as the CE IP address of the peer SDP binding. |
|
ReinstantiateStandbyDatabase |
value=252 |
package=db |
The alarm is raised when a standby database reinstantiation occurs. |
|
ReinstantiateStandbyDatabaseFailed |
value=253 |
package=db |
The alarm is raised when a standby database reinstantiation fails. |
|
PrimaryDatabaseWasDown |
value=254 |
package=db |
The alarm is raised when the primary database returns to service after being unavailable for at least one poll. |
|
upgradedCardAlarm |
value=255 |
package=equipment |
The alarm is raised when the standby CPM is rebooted and operational after a software upgrade. A device resets an IOM automatically after 120 minutes if the IOM is not manually reset after a CPM upgrade. |
|
downgradedCardAlarm |
value=256 |
package=equipment |
The alarm is raised when an IOM is not upgraded or reset after a device software upgrade of both CPMs. A device resets an IOM automatically after 120 minutes if the IOM is not manually reset after a CPM upgrade. |
|
TimedLicenseExpiryNotice |
value=263 |
package=security |
The alarm is raised when the NFM-P license timer expires. The alarm information includes the license expiry date. |
|
LspPathBypassTunnelActive |
value=264 |
package=mpls |
The alarm is raised when an LSP primary path is rerouted to the bypass tunnel. The alarm clears when the primary path returns to the original tunnel and the actual hop returns to the primary path. |
|
TxRetransmit |
value=266 |
package=ospf |
The alarm is raised when an NE retransmits an OSPF packet on a non-virtual interface. The alarm information includes the NE ID of the OSPF neighbor. |
|
peerSetConfigurationIssue |
value=267 |
package=pim |
The alarm is raised when a peer set is misconfigured. |
|
missingStaticRPConfigurations |
value=268 |
package=pim |
The alarm is raised when a static RP configuration is missing. |
|
invalidRPLoopbackInterfaceConfig |
value=269 |
package=pim |
The alarm is raised when an RP loopback interface configuration is invalid. |
|
mismatchAnyCastRPTypes |
value=270 |
package=pim |
The alarm is raised when there is an anycast RP type mismatch. |
|
SubscrAuthPolicyMisconfigured |
value=271 |
package=rtr |
The alarm is raised when a subscriber authentication policy for DHCP relay is misconfigured. |
|
SubscrAuthPolicyMisconfigured |
value=271 |
package=vpls |
The alarm is raised when a subscriber authentication policy for DHCP relay is misconfigured. |
|
SasThresholdExceededAlarm |
value=272 |
package=sas |
The alarm is raised when a rising or falling threshold is crossed by a jitter, latency, or loss value. The alarm is raised only against a scheduled test. The alarm information includes the threshold type, the threshold setting, and the current rising or falling value. |
|
scriptBackupLost |
value=273 |
package=subscrident |
The alarm is raised when the primary subscriber identification script URL is operationally up, but a lower-priority script or URL is operationally down. |
|
backupScriptInUse |
value=274 |
package=subscrident |
The alarm is raised when the primary subscriber identification script is operationally down, but one of the other scripts is operationally up. |
|
noFunctioningScript |
value=275 |
package=subscrident |
The alarm is raised when all subscriber identification scripts are operationally down. |
|
HostConnectivityLostRateExceeded |
value=276 |
package=ressubscr |
The alarm is raised when the trapDroppedRaisesAlarm parameter is enabled and the maximum allowed number of SHCV host connectivity loss events on a SAP is exceeded. The SHCV action in response to the alarm is specified by the maxHostLostConnectivityRate parameter. If the specified action is to remove the host information, the host information is removed and the connectivity of the host is not subsequently verified. |
|
VirtualRouterDown |
value=277 |
package=vrrp |
The alarm is raised when the aggregated Operational State of a VR is Down. This alarm is deprecated from 21.6 onwards. Please use the below three alarms as alternatives. {{vrrp.VRInstance.mismatchSubnets}} {{vrrp.VRInstance.mismatchVrrpTypes}} {{vrrp.VRInstance.mismatchBackupAddress}} |
|
mismatchVrrpTypes |
value=278 |
package=vrrp |
The alarm is raised when two VR instances in a VR are of different types, for example, when one VR instance type is Network and the other is IES. |
|
mismatchBackupAddress |
value=279 |
package=vrrp |
The alarm is raised when two VR instances in a VR have different backup addresses. |
|
mismatchSubnets |
value=280 |
package=vrrp |
The alarm is raised when two VR Instances in a VR have backup addresses that are in different subnets. |
|
AuthFailure |
value=281 |
package=vrrp |
The alarm is raised when authentication fails. The alarm information includes the source IP address. |
|
IPListMismatch |
value=282 |
package=vrrp |
The alarm is raised when the IP address list in an advertisement message from the current master does not match the configured IP address list. |
|
MultipleOwners |
value=283 |
package=vrrp |
The alarm is raised when an owner VR instance detects another instance that advertises itself as an owner. |
|
InstanceDown |
value=284 |
package=vrrp |
The alarm is raised when the NFM-P detects that a VRRP instance is operationally down. |
|
InstanceDown |
value=284 |
package=srrp |
The alarm is raised when the NFM-P detects that an SRRP instance is operationally down. |
|
NewSsh2ServerKeyDetected |
value=285 |
package=security |
The alarm is raised when a NFM-P main server detects a new public SSH key. |
|
RowThresholdConstraintViolated |
value=286 |
package=db |
The alarm is raised when the number of records in a database table exceeds the number specified in a size constraint policy. |
|
SasTooManyTestsOnNodeAlarm |
value=287 |
package=sas |
The alarm is raised when an NE reaches 60 percent of the allowed number of created or simultaneously executed OAM tests. An attempt to create or execute an NE schedulable test on an NE fails when the number of tests reaches 95 percent of the NE capacity. The alarm information includes the following:
-
the NE ID
-
the number of deployed tests on the NE
-
the allowed number of deployed tests on the NE
|
|
UnsupportedNode |
value=288 |
package=netw |
The alarm is raised when, during network discovery, the NFM-P detects an NE that uses an unsupported device software version. The alarm information includes the IP address of the NE. |
|
TraceError |
value=289 |
package=netw |
The alarm is raised when unusual error log trace messages are generated on an NE. The alarm information includes the title of the logged event and message details. |
|
SapVlanSubTypeConflict |
value=290 |
package=vlan |
The alarm is raised when a SAP resynchronization indicates that the VLAN subtype of the SAP is different from the site subtype. The alarm information includes the ID of the associated port. |
|
MissingLocalEntry |
value=291 |
package=l2fwd |
The alarm is raised when a protected MAC address is not configured on all sites of a VPLS. This can occur if the protected MAC address is added or removed using a CLI. |
|
SdpBindingMisconfigured |
value=293 |
package=svt |
The alarm is raised when the return SDP binding type does not match the originating SDP binding type, for example, when the return SDP binding is spoke and the originating SDP binding is mesh. |
|
IncompleteConfig |
value=294 |
package=bundle |
The alarm is raised when there are not exactly two APS bundles in an APS group. |
|
IncompleteConfig |
value=294 |
package=multichassis |
The alarm is raised when a peer configuration cannot be found on the peer NE. |
|
IncompleteConfig |
value=294 |
package=lag |
The alarm is raised when an MC LAG has fewer than two members. |
|
IncompleteConfig |
value=294 |
package=rmon |
The alarm is raised when an object is created with default values but not yet made active. |
|
AsymmetricalConfig |
value=295 |
package=lag |
The alarm is raised when the members of an MC LAG do not have matching configurations. |
|
AsymmetricalConfig |
value=295 |
package=multichassis |
The alarm is raised when there is a peer configuration mismatch that prevents MC operation. |
|
AsymmetricalConfig |
value=295 |
package=bundle |
The alarm is raised when the bundles in an APS group do not have matching configurations. |
|
DatabaseRedundancyRealTimeApplyFailure |
value=296 |
package=db |
The alarm is raised when database redundancy falls out of real-time apply transfer mode, which means that the primary database transactions are not immediately replicated to the standby database. The alarm clears when the database is operating in real-time apply mode. |
|
StpExceptionCondition |
value=297 |
package=l2fwd |
The alarm is raised when a SAP detects an STP exception condition, for example, one-way communication or a downstream loop. The alarm clears when the STP condition changes. |
|
CliLoginFailed |
value=298 |
package=netw |
The alarm is raised when a CLI login attempt fails because of an incorrect user name or password. |
|
CliConnectionProblem |
value=299 |
package=netw |
The alarm is raised when the NFM-P fails to open a CLI session on an NE because the number of open CLI sessions on the NE is at the maximum. |
|
UnmanageFailed |
value=300 |
package=netw |
The alarm is raised when an attempt to unmanage an NE fails. |
|
IsisInterfaceDown |
value=301 |
package=isis |
The alarm is raised when an IS-IS interface has an Operational State other than Up. |
|
DatabaseRedundancyOutOfSync |
value=302 |
package=db |
The alarm is raised when the primary NFM-P server polls the primary and standby databases and detects a difference in the primary and standby database archive log sequence numbers that is greater than one. The alarm may indicate that the primary database is not sending archive logs to the standby quickly enough, or that the standby database is not able to process the archive logs at the rate that the primary sends them. The alarm is raised only in a redundant NFM-P system. |
|
EthernetPortSignalFailure |
value=303 |
package=ethernetequipment |
The alarm is raised when a device reports a signal failure on an Ethernet port. |
|
EthernetPortRemoteFault |
value=304 |
package=ethernetequipment |
The alarm is raised when a device reports a remote fault on an Ethernet port. |
|
EthernetPortLocalFault |
value=305 |
package=ethernetequipment |
The alarm is raised when a device reports a local fault on an Ethernet port that is administratively up. |
|
EthernetPortNoFrameLock |
value=306 |
package=ethernetequipment |
The alarm is raised when a device reports No Frame Lock on an Ethernet port. |
|
EthernetPortHighBer |
value=307 |
package=ethernetequipment |
The alarm is raised when a device reports a high bit-error rate on an Ethernet port. |
|
OspfLsaRateThresholdExceededPerRouter |
value=308 |
package=topology |
The alarm is raised when the OSPF LSA rate for an NE exceeds the maximum allowed value because of an unstable NE link. |
|
OspfInternalLsaThresholdExceededPerArea |
value=309 |
package=topology |
The alarm is raised when the number of OSPF internal LSAs for an area exceeds the maximum allowed value because of a large IGP network. |
|
OspfInternalLsaRateThresholdExceededPerArea |
value=310 |
package=topology |
The alarm is raised when the OSPF internal LSA rate for an area exceeds the maximum allowed value because of an unstable IGP network. |
|
AuxiliaryServerStatus |
value=311 |
package=server |
The alarm is raised when a main server cannot communicate with an auxiliary server. The alarm clears when communication is restored. |
|
TodSuiteAssignmentFailure |
value=312 |
package=svq |
The alarm is raised when an object fails to perform the action specified in a Time of Day suite. |
|
TodSuiteAssignmentFailure |
value=312 |
package=service |
The alarm is raised when a Time of Day suite cannot be assigned to an aggregation scheduler, or to an L2 or L3 access interface, because of a configuration conflict or a lack of resources. The alarm is not raised against a SAP. |
|
SapStaticHostDynamicMacConflict |
value=313 |
package=antispoof |
The alarm is raised when an NE tries to learn a dynamic MAC address from an IP-only static host. |
|
LogLocFailure |
value=340 |
package=file |
The alarm is raised when an attempt to create a log or billing file fails. The probable cause is AdminLocFailure when using the admin location fails, in which case the backup location, if specified, is used. The probable cause is BackupLocFailure when using the backup location fails. |
|
McacPolicyDropped |
value=341 |
package=igmp |
The alarm is raised when an IGMP group is dropped because a multicast CAC policy is applied. |
|
McacPolicyDropped |
value=341 |
package=svt |
The alarm is raised when an IGMP group is dropped because a multicast CAC policy is applied to an SDP binding. |
|
McacPolicyDropped |
value=341 |
package=vpls |
The alarm is raised when an IGMP group is removed from a SAP because a multicast CAC policy is applied. |
|
McacPolicyDropped |
value=341 |
package=pim |
The alarm is raised when a PIM group is dropped because a multicast CAC policy is applied. |
|
LicenseMismatch |
value=342 |
package=security |
The alarm is raised when the primary main server license does not match the standby main server license. |
|
MissingHopConfiguration |
value=350 |
package=mpls |
The alarm is raised when a static LSP is created without hops. |
|
LastHopNotMatchingDestination |
value=351 |
package=mpls |
The alarm is raised when the last hop in a static LSP is not the destination. |
|
LastHopIncorrectLabelAction |
value=352 |
package=mpls |
The alarm is raised when the label action specified for the last hop in a static LSP is not a pop action. |
|
MsdpDown |
value=353 |
package=msdp |
The alarm is raised when an MSDP site is administratively down. The alarm clears when the site is administratively up. |
|
MsdpRPFFailure |
value=354 |
package=msdp |
The alarm is raised when an MSDP site experiences an RPF failure. |
|
MissedStatsCollection |
value=355 |
package=netw |
The alarm is raised when a NFM-P main server cannot collect statistics from the node during a statistics poll. It is cleared after NFM-P main server can collect statistics from the node during a statistics poll. |
|
EventsThrottled |
value=356 |
package=netw |
The alarm is raised when an NE throttles events because the event rate exceeds the configured maximum. |
|
FtpClientFailure |
value=357 |
package=netw |
The alarm is raised when an NE sends notification that an FTP operation initiated by the FTP client fails because of file unavailability, interruption during the file transfer, or a lack of available storage space. |
|
JMSServerDown |
value=360 |
package=netw |
The alarm is raised when JMS communication fails. |
|
DataMtReused |
value=361 |
package=pim |
The alarm is raised when a data MDT is reused. |
|
PppLoopbackDetected |
value=362 |
package=ppp |
The alarm is raised when the value of tmnxPppLocalMagicNumber is the same as the value of tmnxPppRemoteMagicNumber, which indicates that the link may be looped back. |
|
RadiusAcctPlcyFailure |
value=363 |
package=radiusaccounting |
The alarm is raised when a RADIUS accounting request is not successfully sent to any of the RADIUS servers specified in the RADIUS accounting policy. |
|
RuleRegistrationError |
value=364 |
package=rules |
The alarm is raised when one or more internal NFM-P server rule-engine rules fails to compile. The cause is typically a rule syntax error or a system error. |
|
TopologyRuleExecutionError |
value=365 |
package=tunnelmgmt |
The alarm is raised when the NFM-P cannot execute a topology rule or when rule execution generates an error. Rule execution is the process that determines which tunnel elements require creation, modification, or deletion. The alarm typically indicates that the rule is misconfigured. |
|
TunnelElementCreationError |
value=366 |
package=tunnelmgmt |
The alarm is raised when the creation of a missing tunnel element fails. |
|
TunnelElementDeleteError |
value=367 |
package=tunnelmgmt |
The alarm is raised when the deletion of an obsolete or unused tunnel element fails. |
|
TunnelElementInUseWarning |
value=368 |
package=tunnelmgmt |
The alarm is raised when the NFM-P does not attempt to delete an obsolete or unused tunnel element because the element is in use by another object. |
|
OspfExternalLsaThresholdExceeded |
value=372 |
package=topology |
The alarm is raised when the number of OSPF external LSAs exceeds the maximum threshold because a large number of external LSAs flooding into the IGP. |
|
TopologyIsisSystemError |
value=373 |
package=topology |
The alarm is raised when an IS-IS topology system error is detected. |
|
OspfLsaThresholdExceededPerRouter |
value=374 |
package=topology |
The alarm is raised when the number of OSPF LSAs for an NE exceeds the maximum allowed value because the NE advertises too many LSAs. |
|
IsisLspThresholdExceeded |
value=375 |
package=topology |
The alarm is raised when the number of IS-IS LSPs exceeds the maximum allowed value because of a large IGP network. |
|
IsisLspRateThresholdExceeded |
value=376 |
package=topology |
The alarm is raised when the IS-IS LSP rate exceeds the maximum allowed value because of an unstable IGP network. |
|
IsisReachabilityThresholdExceeded |
value=377 |
package=topology |
The alarm is raised when the IS-IS reachability value exceeds the maximum allowed value because too many external LSAs are flooding the IGP. |
|
MsdpGroupSrcActMsgsExcd |
value=378 |
package=msdp |
The alarm is raised when an MSDP group receives a number of source active messages that exceeds the configured maximum. |
|
MsdpPeerActSrcLimExcd |
value=379 |
package=msdp |
The alarm is raised when an MSDP peer receives a number of source active messages that exceeds the configured maximum. |
|
MsdpActSrcLimExcd |
value=380 |
package=msdp |
The alarm is raised when an MSDP site receives a number of source active messages that exceeds the configured maximum. |
|
MsdpSourceSrcActMsgsExcd |
value=381 |
package=msdp |
The alarm is raised when an MSDP source receives a number of source active messages that exceeds the configured maximum. |
|
MisconfiguredNode |
value=382 |
package=netw |
The alarm is raised when the NFM-P tries to discover an NE that is not properly configured for management. For example, when persistence is set to Off in the NE BOF, when the NE has no system address or NE share same management and system address. |
|
TooManyCpaaPerOspfArea |
value=383 |
package=topology |
The alarm is raised when there are too many 7701 CPAAs for an OSPF area. |
|
TooManyCpaaForIsisLevel2 |
value=384 |
package=topology |
The alarm is raised when there are too many 7701 CPAAs for IS-IS level 2. |
|
TooManyCpaaPerIsisArea |
value=385 |
package=topology |
The alarm is raised when there are too many 7701 CPAAs for an ISIS L1 area. |
|
SapDHCPLeaseEntriesExceeded |
value=386 |
package=service |
The alarm is raised when the number of DHCP lease-state entries on a SAP reaches the configured maximum value. This value is defined by sapTlsDhcpLeasePopulate for a TLS VLAN service, and by vRtrIfDHCPLeasePopulate for an IES or VPRN service. |
|
sapDHCPProxyServerError |
value=387 |
package=service |
The alarm is raised when the NFM-P is unable to proxy a DHCP request. |
|
OverTemperatureDetected |
value=388 |
package=equipment |
The alarm is raised when the chassis temperature exceeds the maximum threshold value. |
|
LicensedCpaaLimitExceeded |
value=389 |
package=security |
The alarm is raised when the number of 7701 CPAAs in the network reaches 100 percent of the license capacity. |
|
LicensedCpaaLimitNearing |
value=390 |
package=security |
The alarm is raised when the number of 7701 CPAAs in the network reaches 75 to 90 percent of the license capacity. |
|
LicensedCpaaLimitNearlyExceeded |
value=391 |
package=security |
The alarm is raised when the number of 7701 CPAAs in the network reaches 90 to 100 percent of the license capacity. |
|
IgmpSnpgGrpDroppedLimitExceeded |
value=392 |
package=svt |
The alarm is raised when an IGMP group is removed from an SDP binding because the number of allowed IGMP groups specified by sdpBndIgmpSnpgCfgMaxNbrGrps is reached. |
|
IgmpSnpgGrpDroppedLimitExceeded |
value=392 |
package=vpls |
The alarm is raised when an IGMP group is removed from a SAP because the number of allowed IGMP groups specified by sapIgmpSnpgCfgMaxNbrGrps is reached. |
|
sapReceivedProtSrcMac |
value=393 |
package=l2fwd |
The alarm is raised when a restricted SAP receives a re-learn request for a protected MAC address. The alarm is cleared when an operationalflag recProtSrcMac is unset on SAP. |
|
MCLagDown |
value=394 |
package=lag |
The alarm is raised when all ports in an MC LAG are operationally down. |
|
MCLagDown |
value=394 |
package=multichassis |
The alarm is raised when all ports in an MC LAG are operationally Down. |
|
ManagedRouteFailedRetryThresholdCrossed |
value=397 |
package=topology |
The alarm is raised when the 5650 CPAM cannot set up a managed route after the number of attempts specified by the cpamManagedRoute problematicThresholdAlarmAfter value in the nms-server.xml file. The alarm is raised if the cpamManagedRoute problematicRetryStrategy value in nms-server.xml is set to countdown. The alarm is not raised if the problematicRetryStrategy value is set to the default of reactive. |
|
ManagedRouteRetryAttemptsExhausted |
value=398 |
package=topology |
The alarm is raised when the 5650 CPAM stops trying to set up a managed route after the number of attempts specified by the cpamManagedRoute problematicDeadAfter value in the nms-server.xml file. The alarm is raised if the cpamManagedRoute problematicRetryStrategy value in nms-server.xml is set to countdown. The alarm is not raised if the problematicRetryStrategy value is set to the default value of reactive. |
|
OracleHomeDiskSpaceBelowThreshold |
value=399 |
package=db |
The alarm is raised when the primary or standalone database Oracle disk space threshold specified in the nms-server.xml file is reached. |
|
IpPathMonitorFailedRetryThresholdCrossed |
value=400 |
package=monpath |
The alarm is raised when the 5650 CPAM cannot set up an IP path monitor after the number of attempts specified by the cpamManagedRoute problematicThresholdAlarmAfter value in the nms-server.xml file. The alarm is raised if the cpamManagedRoute problematicRetryStrategy value in nms-server.xml is set to countdown. The default problematicRetryStrategy value of reactive prevents the alarm from being raised. |
|
IpPathMonitorRetryAttemptsExhausted |
value=401 |
package=monpath |
The alarm is raised when the 5650 CPAM stops trying to set up an IP path monitor after the number of attempts specified by the cpamManagedRoute problematicDeadAfter value in the nms-server.xml file. The alarm is raised if the cpamManagedRoute problematicRetryStrategy value in nms-server.xml is set to countdown. The default problematicRetryStrategy value of reactive prevents the alarm from being raised. |
|
CliCommandFailure |
value=402 |
package=netw |
The alarm is raised when a CLI command on an NE fails. |
|
GenericInterfaceLinkDown |
value=403 |
package=genericne |
The alarm is raised when the NFM-P detects a communication link failure on a GNE interface. The alarm clears when the link returns to service. |
|
DaughterCardConfigNotCompatible |
value=404 |
package=equipment |
The alarm is raised when a supported MDA is inserted into a compatible IOM slot, but the configuration on the MDA ports is not compatible with the MDA. |
|
ConfigNotCompatible |
value=405 |
package=equipment |
The alarm is raised when an MDA configuration is incompatible with the MDA. |
|
SSHServerPreserveKeyFailure |
value=406 |
package=equipment |
The alarm is raised when the CPM fails to save the SSH server host key on the persistent drive. |
|
SonetSDHLoopback |
value=407 |
package=sonetequipment |
The alarm is raised when a loopback test is provisioned on a SONET/SDH port. |
|
DS3E3Loopback |
value=408 |
package=tdmequipment |
The alarm is raised when an NE reports that a specific DS3 or E3 channel has a loopback alarm condition. |
|
DS1E1Loopback |
value=409 |
package=tdmequipment |
The alarm is raised when an NE reports that a specific DS1 or E1 channel has a loopback alarm condition. |
|
SnmpDown |
value=410 |
package=netw |
The alarm is raised when the SNMP agent is manually shut down on an NE and the NE sends a trap to indicate this. |
|
DuplicateRouterIdProblem |
value=411 |
package=netw |
The alarm is raised when the NFM-P detects that the same address is being used by multiple NEs. To prevent NFM-P database corruption, the NFM-P does not discover the NE with the duplicate address. |
|
TrapRateThresholdExceeded |
value=412 |
package=netw |
The alarm is raised when the incoming SNMP trap rate is greater than the configured trap rate threshold. |
|
MissingRisingEvent |
value=413 |
package=rmon |
The alarm is raised when the NFM-P cannot find the rising event object that is named in an RMON policy alarm definition. |
|
MissingFallingEvent |
value=414 |
package=rmon |
The alarm is raised when the NFM-P cannot find the falling event object that is named in an RMON policy alarm definition. |
|
SubnetMismatch |
value=415 |
package=srrp |
The alarm is raised when the IP address list received from the master does not match the local IP address list. |
|
InstanceIdMismatch |
value=416 |
package=srrp |
The alarm is raised when a local SRRP SAP is backed up by a different SRRP instance on a remote peer. |
|
SapMismatch |
value=417 |
package=srrp |
The alarm is raised when the SRRP SAPs on the local interface do not match the SRRP SAPs on the remote interface. |
|
SapTagMismatch |
value=418 |
package=srrp |
The alarm is raised when the tag of a local SAP does not match the tag of a remote SAP. |
|
RedundantIfMismatch |
value=419 |
package=srrp |
The alarm is raised when the local and remote redundant interfaces are not correctly paired. |
|
DualMaster |
value=420 |
package=srrp |
The alarm is raised when the local and remote SRRP instances are in the master state. |
|
KeyChainAuthFailure |
value=421 |
package=security |
The alarm is raised when an incoming packet is dropped because of a TCP key chain authentication failure. |
|
LagPortAddFailed |
value=422 |
package=equipment |
The alarm is raised when the Lag Port Add function Fails. |
|
tmnxMcSyncClientAlarm |
value=423 |
package=multichassis |
The alarm is raised when a MC synchronization database entry is deleted locally. |
|
CheckpointLimitAt75Percent |
value=425 |
package=topology |
The alarm is raised when the number of check points reaches 75 percent of the maximum allowed value. |
|
CheckpointLimitReachedOrExceeded |
value=426 |
package=topology |
The alarm is raised when the number of check points objects reaches or exceeds the maximum allowed value. |
|
BgpASAdminDomainNumberMismatch |
value=427 |
package=topology |
The alarm is raised when a 7701 CPAA BGP AS does not match the BGP AS administrative domain. |
|
BgpRouteCountThresholdReached |
value=428 |
package=topology |
The alarm is raised when the BGP route count for a next hop exceeds the maximum threshold value for next hops. |
|
BgpRouteRateThresholdReached |
value=429 |
package=topology |
The alarm is raised when the BGP route rate for a next hop exceeds the maximum threshold value for next hops. |
|
BgpRouteFlapRateThresholdReached |
value=430 |
package=topology |
The alarm is raised when the BGP route flap rate exceeds the maximum threshold value. |
|
BgpPktRateThresholdReached |
value=431 |
package=topology |
The alarm is raised when a BGP packet rate exceeds the maximum threshold value. |
|
BgpMonitorPrefixFlapRateThresholdReached |
value=432 |
package=topology |
The alarm is raised when a BGP monitor prefix flap rate exceeds the maximum flap rate threshold value. |
|
BgpRouteHighWatermarkPerRTargetReached |
value=433 |
package=topology |
The alarm is raised when there are too many BGP routes for a route target. |
|
BgpRouteLowWatermarkPerRTargetReached |
value=434 |
package=topology |
The alarm is raised when there are too few BGP routes for a route target. |
|
BgpRouteRateThresholdPerRTargetReached |
value=435 |
package=topology |
The alarm is raised when the BGP route rate for a target reaches the maximum threshold value for route targets. |
|
TimeMismatch |
value=436 |
package=server |
The alarm is raised when the system time on a NFM-P auxiliary server station differs from the system time on a main server station. |
|
EndpointActiveObjectChanged |
value=437 |
package=service |
The alarm is raised when an automatic or manual endpoint switchover occurs. |
|
BfdSessionMissing |
value=438 |
package=vprn |
The alarm is raised when a previously present BFD session is absent. |
|
BfdSessionMissing |
value=438 |
package=service |
The alarm is raised when a previously present BFD session is absent. |
|
BfdSessionMissing |
value=438 |
package=rtr |
The alarm is raised when a previously present BFD session is absent. |
|
BfdSessionDown |
value=439 |
package=service |
The alarm is raised when a BFD session is operationally down. |
|
BfdSessionDown |
value=439 |
package=vprn |
The alarm is raised when a BFD session is operationally Down. |
|
BfdSessionDown |
value=439 |
package=rtr |
The alarm is raised when a BFD session is operationally down. |
|
SubscriberInterfaceDown |
value=440 |
package=service |
The alarm is raised when a subscriber interface is operationally down. The alarm clears when the subscriber interface is operationally up. |
|
GroupInterfaceDown |
value=441 |
package=service |
The alarm is raised when the NFM-P detects that a group interface is operationally down. The alarm clears when the group interface is operationally up. |
|
CommunityMisconfiguration |
value=442 |
package=vprn |
The alarm is raised when the NFM-P detects a community misconfiguration on a service site. |
|
MacPinningViolation |
value=443 |
package=vpls |
The alarm is raised when an attempt is made to assign a pinned MAC address to another L2 access interface or spoke SDP binding in an M-VPLS or VPLS. |
|
EndpointMacLimitReached |
value=444 |
package=vpls |
The alarm is raised when the NFM-P receives the svcEndpointMacLimitAlarmRaised trap from an NE, which indicates that the number of MAC addresses stored in the FDB for the endpoint exceeds the high watermark for the site FIB. The number of MAC addresses includes the static MAC addresses on the endpoint and the learned MAC addresses in the spoke SDPs that are associated with the endpoint. The alarm clears when the NFM-P receives the svcEndpointMacLimitAlarmCleared trap from the NE. |
|
CesStrayPkts |
value=445 |
package=vll |
The alarm is raised when the NFM-P detects received stray packets. |
|
CesMalformedPkts |
value=446 |
package=vll |
The alarm is raised when the NFM-P detects one or more malformed packets. |
|
CesPktLoss |
value=447 |
package=vll |
The alarm is raised when the NFM-P detects a packet loss. |
|
CesBfrOverrun |
value=448 |
package=vll |
The alarm is raised when the NFM-P detects a jitter buffer overrun. |
|
CesBfrUnderrun |
value=449 |
package=vll |
The alarm is raised when the NFM-P detects a jitter buffer underrun. |
|
CesRmtPktLoss |
value=450 |
package=vll |
The alarm is raised when the NFM-P detects a remote packet loss. |
|
CesRmtTdmFault |
value=451 |
package=vll |
The alarm is raised when the NFM-P detects a remote TDM fault. |
|
CesRmtRdi |
value=452 |
package=vll |
The alarm is raised when the NFM-P detects a remote RDI. |
|
TableSpaceAboveThreshold |
value=454 |
package=db |
The alarm is raised when the database table space becomes too full, which may indicate that the performance statistics collection rate or the statistics retention time is too high. |
|
EquipmentAdministrativelyDown |
value=455 |
package=equipment |
The alarm is raised when the compositeEquipmentState attribute has a value of equipmentAdministrativelyDown. |
|
SGLimitExceeded |
value=456 |
package=equipment |
The alarm is raised when the number of PIM snooping source group records on a card exceeds the maximum. |
|
PrimaryPathLimitReached |
value=457 |
package=equipment |
The alarm is raised when the Ingress Multicast Path Management primary path bandwidth limit is reached. |
|
SecondaryPathLimitReached |
value=458 |
package=equipment |
The alarm is raised when the Ingress Multicast Path Management secondary path bandwidth limit is reached. |
|
AncillaryPathLimitReached |
value=459 |
package=equipment |
The alarm is raised when the Ingress Multicast Path Management ancillary path bandwidth limit is reached. |
|
DryContactAlarm |
value=460 |
package=equipment |
The alarm is raised when a device detects a dry contact alarm condition. |
|
TmnxEqPortEtherLoopDetected |
value=461 |
package=ethernetequipment |
The alarm is raised when a device detects a physical loop on an Ethernet port. |
|
OutOfSlots |
value=462 |
package=equipment |
The alarm is raised when a stack element enters pass-through mode because there is no slot number for the element. |
|
ContainingEquipmentMissing |
value=463 |
package=equipment |
The alarm is raised when the compositeEquipmentState attribute has a value of containingEquipmentMissing. |
|
ContainingEquipmentMismatch |
value=464 |
package=equipment |
The alarm is raised when the compositeEquipmentState attribute has a value of containingEquipmentMismatch. |
|
ContainingEquipmentOperationallyDown |
value=465 |
package=equipment |
The alarm is raised when the compositeEquipmentState attribute has a value of containingEquipmentOperationllyDown. |
|
ContainingEquipmentAdministrativelyDown |
value=466 |
package=equipment |
The alarm is raised when the compositeEquipmentState attribute has a value of containingEquipmentAdministrativelyDown. |
|
BackgroundDiagnosticFault |
value=467 |
package=equipment |
The alarm is raised when an NE detects a failure in a background diagnostic test suite. |
|
DuplicateSlot |
value=468 |
package=equipment |
The alarm is raised when a slot has the same slot number as another stack element. The slot must relinquish its operational status because it has a higher election key, based on the up time, slot number, and MAC address. Both slots subsequently enter pass-through mode. |
|
BrokenLoop |
value=469 |
package=equipment |
The alarm is raised when the loop-detection stack detects a loop condition, or when the stack contains an unexpected element. |
|
DuplicateRole |
value=470 |
package=equipment |
The alarm is raised when a slot has the same primary or secondary role as another slot in the stack. The slot subsequently enters pass-through mode. |
|
SWIncompatibility |
value=471 |
package=equipment |
The alarm is raised when a slot is not compatible with the current stack. The slot subsequently enters pass-through mode. |
|
DDMTemperatureLowWarning |
value=472 |
package=equipment |
The alarm is raised when the temperature of an SFP or XFP approaches the maximum threshold value. |
|
DDMTemperatureLowAlarm |
value=473 |
package=equipment |
The alarm is raised when the temperature of an SFP or XFP reaches the maximum threshold value. |
|
DDMTemperatureHighWarning |
value=474 |
package=equipment |
The alarm is raised when the temperature of an SFP or XFP approaches the maximum threshold value. |
|
DDMTemperatureHighAlarm |
value=475 |
package=equipment |
The alarm is raised when the temperature of an SFP or XFP reaches the maximum threshold value. |
|
DDMSupplyVoltageLowWarning |
value=476 |
package=equipment |
The alarm is raised when the supply voltage of an SFP or XFP approaches the maximum threshold value. |
|
DDMSupplyVoltageLowAlarm |
value=477 |
package=equipment |
The alarm is raised when the supply voltage of an SFP or XFP reaches the maximum threshold value. |
|
DDMSupplyVoltageHighWarning |
value=478 |
package=equipment |
The alarm is raised when the supply voltage of an SFP or XFP approaches the maximum threshold value. |
|
DDMSupplyVoltageHighAlarm |
value=479 |
package=equipment |
The alarm is raised when the supply voltage of an SFP or XFP reaches the maximum threshold value. |
|
DDMTxBiasCurrentLowWarning |
value=480 |
package=equipment |
The alarm is raised when the transmit bias current of an SFP or XFP approaches the maximum threshold value. |
|
DDMTxBiasCurrentLowAlarm |
value=481 |
package=equipment |
The alarm is raised when the transmit bias current of an SFP or XFP reaches the maximum threshold value. |
|
DDMTxBiasCurrentHighWarning |
value=482 |
package=equipment |
The alarm is raised when the transmit bias current of an SFP or XFP approaches the maximum threshold value. |
|
DDMTxBiasCurrentHighAlarm |
value=483 |
package=equipment |
The alarm is raised when the transmit bias current of an SFP or XFP reaches the maximum threshold value. |
|
DDMTxOutputPowerLowWarning |
value=484 |
package=equipment |
The alarm is raised when the output power of an SFP or XFP approaches the maximum threshold value. |
|
DDMTxOutputPowerLowAlarm |
value=485 |
package=equipment |
The alarm is raised when the output power of an SFP or XFP reaches the maximum threshold value. |
|
DDMTxOutputPowerHighWarning |
value=486 |
package=equipment |
The alarm is raised when the output power of an SFP or XFP approaches the maximum threshold value. |
|
DDMTxOutputPowerHighAlarm |
value=487 |
package=equipment |
The alarm is raised when the output power of an SFP or XFP reaches the maximum threshold value. |
|
DDMRxOpticalPowerLowWarning |
value=488 |
package=equipment |
The alarm is raised when the received optical power of an SFP or XFP approaches the minimum threshold value. |
|
DDMRxOpticalPowerLowAlarm |
value=489 |
package=equipment |
The alarm is raised when the received optical power of an SFP or XFP reaches the minimum threshold value. |
|
DDMRxOpticalPowerHighWarning |
value=490 |
package=equipment |
The alarm is raised when the received optical power of an SFP or XFP approaches the maximum threshold value. |
|
DDMRxOpticalPowerHighAlarm |
value=491 |
package=equipment |
The alarm is raised when the received optical power of an SFP or XFP reaches the maximum threshold value. |
|
DDMAux1LowWarning |
value=492 |
package=equipment |
The alarm is raised when the manufacturer-specific Auxiliary 1 of the XFP approaches the minimum threshold value. |
|
DDMAux1LowAlarm |
value=493 |
package=equipment |
The alarm is raised when the manufacturer-specific Auxiliary 1 of the XFP reaches the minimum threshold value. |
|
DDMAux1HighWarning |
value=494 |
package=equipment |
The alarm is raised when the manufacturer-specific Auxiliary 1 of the XFP approaches the maximum threshold value. |
|
DDMAux1HighAlarm |
value=495 |
package=equipment |
The alarm is raised when the manufacturer-specific Auxiliary 1 of the XFP reaches the maximum threshold value. |
|
DDMAux2LowWarning |
value=496 |
package=equipment |
The alarm is raised when the manufacturer-specific Auxiliary 2 of the XFP approaches the minimum threshold value. |
|
DDMAux2LowAlarm |
value=497 |
package=equipment |
The alarm is raised when the manufacturer-specific Auxiliary 2 of the XFP reaches the minimum threshold value. |
|
DDMAux2HighWarning |
value=498 |
package=equipment |
The alarm is raised when the manufacturer-specific Auxiliary 2 of the XFP approaches the maximum threshold value. |
|
DDMAux2HighAlarm |
value=499 |
package=equipment |
The alarm is raised when the manufacturer-specific Auxiliary 2 of the XFP reaches the maximum threshold value. |
|
DS1E1SignalDegradation |
value=500 |
package=tdmequipment |
The alarm is raised when an NE reports that a specific DS1 or E1 channel has an SD alarm condition. |
|
DS1E1SignalFailure |
value=501 |
package=tdmequipment |
The alarm is raised when an NE reports that a specific DS1 or E1 channel has an SF alarm condition. |
|
RemoteMepCCMAlarm |
value=502 |
package=ethernetoam |
The alarm is raised when a MEP loses connectivity with one or more remote MEPs. The Remote MEP DB State tab on a MEP lists the missing remote MEPs. |
|
StpRootGuardViolation |
value=503 |
package=l2fwd |
The alarm is raised when a SAP detects an STP root guard violation. |
|
ReceivedHigherBridgePriority |
value=504 |
package=l2fwd |
The alarm is raised when a customer NE is configured with a bridge priority of zero. The SDP binding that connects to the customer device is subsequently blocked. |
|
MaxNumIpv6RoutesReached |
value=505 |
package=l3fwd |
The alarm is raised when the number of IPv6 routes in a VPRN exceeds the configured maximum. |
|
MidLevelIPv6RoutesReached |
value=506 |
package=l3fwd |
The alarm is raised when the number of IPv6 routes in a VPRN exceeds the configured threshold value. The alarm information includes the number of IPv6 routes and the threshold value. |
|
SubnetMinFreeExc |
value=516 |
package=dhcp |
The alarm is raised when the actual number of free addresses in a subnet falls below the desired minimum number specified in the subnet configuration |
|
LpsPortUpAfterLearningWindowExpired |
value=517 |
package=lps |
The alarm is raised either when an LPS port is enabled after the learning window expires and MAC address learning on the port is disabled, or when the learning window expires with slice and port values of 0. |
|
LpsViolation |
value=518 |
package=lps |
The alarm is raised when the NFM-P detects an LPS violation. |
|
LpsLearnMac |
value=519 |
package=lps |
The alarm is raised when an LPS port learns a bridged MAC address. |
|
MultiChassisRingDown |
value=520 |
package=multichassis |
The alarm is raised when a MC ring group Operational State is not in the Connected state. The alarm is cleared when the ring group enters the Connected state. |
|
LocalRncvOperDown |
value=521 |
package=multichassis |
The alarm is raised when the local RNCV Operational State of a ring node is other than Connected or NotTested, which means that the ring node is not connected to the local MC ring group. The alarm clears when the ring node enters the Connected or NotTested state. |
|
RemoteRncvOperDown |
value=522 |
package=multichassis |
The alarm is raised when the remote RNCV Operational State of a ring node is other than Connected or NotTested, which means that the ring node is not connected to the local MC ring group. The alarm clears when the ring node enters the Connected or NotTested state. |
|
TunnelAdministrativelyDown |
value=523 |
package=mpls |
The alarm is raised when the NFM-P detects that an MPLS path is administratively down. |
|
TunnelAdministrativelyDown |
value=523 |
package=svt |
The alarm is raised when the NFM-P detects that a service tunnel is administratively down. |
|
StatisticsCollectionThresholdExceeded |
value=524 |
package=netw |
The alarm is raised when the accounting statistics collection rate exceeds the retention specifications. |
|
CpeUnreachable |
value=525 |
package=rtr |
The alarm is raised when the CPE associated with a static route is unreachable. |
|
STMSystemNotAvailable |
value=526 |
package=sas |
The alarm is raised when the NFM-P detects no available auxiliary servers for test execution. |
|
STMSystemMultiAuxAvailable |
value=527 |
package=sas |
The alarm is raised when the NFM-P detects multiple available auxiliary servers for test execution. |
|
scheduledTaskCompletionStatus |
value=528 |
package=schedule |
The alarm is raised when the execution of a NFM-P scheduled task completes. |
|
AuthorizationFailure |
value=529 |
package=security |
The alarm is raised when a configurable number of attempts to delete or modify an object that is not in the current user span of control fail. |
|
JMSDurableClientReset |
value=530 |
package=security |
The alarm is raised when a durable JMS client is removed from the NFM-P because of a JMS server restart or switchover. |
|
JMSDurableClientUnsubscribed |
value=531 |
package=security |
The alarm is raised when a durable JMS client is unsubscribed and removed from the NFM-P. |
|
JMSClientMessagesRemoved |
value=532 |
package=security |
The alarm is raised when the number of JMS messages that are queued for a NFM-P client exceeds the allowed number. The NFM-P subsequently deletes messages to keep the number within the allowed range. |
|
certifyFailureAlarm |
value=533 |
package=sw |
The alarm is raised when the software certification process on an NE fails. |
|
synchroFailureAlarm |
value=534 |
package=sw |
The alarm is raised when the flash card synchronization on an NE fails. |
|
restoreFailureAlarm |
value=535 |
package=sw |
The alarm is raised when the software restore process on an NE fails. |
|
VersionConfigRestoreFailed |
value=536 |
package=sw |
The alarm is raised when the restore procedure on an NE fails because of a mismatch between the backup file set version and the NE software version. |
|
MldSnpgGrpDroppedLimitExceeded |
value=537 |
package=vpls |
The alarm is raised when a SAP drops an MLD group because the configurable maximum number of MLD groups on the SAP is reached. |
|
AccountingPolicyDown |
value=538 |
package=accounting |
The alarm is raised when an accounting policy goes operationally Down after a file creation failure at the specified admin and backup locations. |
|
StandbyDataFileDiskSpaceBelowThreshold |
value=539 |
package=db |
The alarm is raised when the standby data file disk space threshold specified in the nms-server.xml file is reached. |
|
StandbyOracleHomeDiskSpaceBelowThreshold |
value=540 |
package=db |
The alarm is raised when the standby database Oracle disk space threshold specified in the nms-server.xml file is reached. |
|
PowerSupplyRemoved |
value=542 |
package=equipment |
The alarm is raised when a chassis power supply is removed. |
|
BootConfigFailScriptNotAccesible |
value=543 |
package=netw |
The alarm is raised when a CLI script that runs after NE configuration file execution failure is inaccessible. |
|
BootConfigOKScriptNotAccesible |
value=544 |
package=netw |
The alarm is raised when a CLI script that runs after NE configuration file execution success is inaccessible. |
|
TimingReferenceOneNotQualified |
value=545 |
package=sonet |
The alarm is raised when Timing Reference One on an NE is not in the Qualified state. |
|
TimingReferenceTwoNotQualified |
value=546 |
package=sonet |
The alarm is raised when Timing Reference Two on an NE is not in the Qualified state. |
|
BITSNotQualified |
value=547 |
package=sonet |
The alarm is raised when the BITS/BITS1 timing reference on an NE is not in the Qualified state. |
|
ExternalTimingReferenceNotQualified |
value=548 |
package=sonet |
The alarm is raised when the External timing reference on an NE is not in the Qualified state. |
|
AllTimingReferencesNotQualified |
value=549 |
package=sonet |
The alarm is raised when no timing references on an NE are in the Qualified state. |
|
liDestinationEnabled |
value=550 |
package=mirrorli |
The alarm is raised when a mirror destination Operational State changes from Down to Up. |
|
liDestinationChangeReject |
value=551 |
package=mirrorli |
The alarm is raised when an operator tries to modify a mirror destination that is in use by an LI mirror. |
|
liSourceIPFltrChangeReject |
value=552 |
package=mirrorli |
The alarm is raised when an operator tries to modify an IP filter or an IP filter entry that is in use by LI. |
|
liSourceMacFltrChangeReject |
value=553 |
package=mirrorli |
The alarm is raised when an operator tries to modify a MAC filter or a MAC filter entry that is in use by LI. |
|
liFilterAssignToSapWarn |
value=554 |
package=mirrorli |
The alarm is raised when an operator tries to assign a filter that is in use by LI to a SAP. |
|
liFilterAssignToSdpWarn |
value=555 |
package=mirrorli |
The alarm is raised when an operator tries to assign a filter that is in use by LI to an SDP. |
|
liFilterAssignToItfWarn |
value=556 |
package=mirrorli |
The alarm is raised when an operator tries to assign a filter that is in use by LI to an interface. |
|
liSourceFilterAssignReject |
value=557 |
package=mirrorli |
The alarm is raised when an operator tries to modify a filter that is in use by LI. |
|
liSourceFilterOverruled |
value=558 |
package=mirrorli |
The alarm is raised when the assignment of a mirror filter is overruled by another filter assignment. |
|
liSourceFilterAssignWarn |
value=559 |
package=mirrorli |
The alarm is raised when an operator assigns a mirror filter that is in use by LI and the assignment may be overruled. |
|
liSourceSapChange |
value=560 |
package=mirrorli |
The alarm is raised when a SAP that is associated with LI is modified or deleted. |
|
liSourceSubscriberChange |
value=561 |
package=mirrorli |
The alarm is raised when a subscriber that is associated with LI is modified or deleted. |
|
liSourceEnabled |
value=562 |
package=mirrorli |
The alarm is raised when an LI mirror source Operational State changes from Down to Up. |
|
liSourceDisabled |
value=563 |
package=mirrorli |
The alarm is raised when an LI mirror source Operational State changes from Up to Down. |
|
IsaAaGrpFailure |
value=564 |
package=isa |
The alarm is raised when an ISA-AA Group has no configured primary MDA or the number of active MDAs is not equal to the number of configured primary MDAs. |
|
IsaAaGrpNonRedundant |
value=565 |
package=isa |
The alarm is raised when an ISA-AA Group has a configured backup MDA but there is no standby MDA available. |
|
IsaAaGrpFlowFull |
value=566 |
package=isa |
The alarm is raised when an ISA-AA group uses a greater number of flow records than the value specified by tmnxBsxFlowFullHighWatermark. |
|
IsaAaGrpSwitchover |
value=567 |
package=isa |
The alarm is raised when an ISA-AA group experiences an activity switch from one ISA-AA to another. |
|
FanTrayRemoved |
value=569 |
package=equipment |
The alarm is raised when the deviceState attribute has a value of deviceNotEquipped. |
|
BgpAdVplsIdMisconfiguration |
value=570 |
package=vpls |
The alarm is raised when the VPLS ID of a site does not match the VPLS ID of the other sites in the service. |
|
PbbSiteMisconfiguration |
value=571 |
package=vpls |
The alarm is raised when a VPLS contains a B-Site and an I-Site. |
|
BgpAdVplsIdDiscoveryError |
value=572 |
package=vpls |
The alarm is raised when the VPLS ID of a discovered VPLS instance is ambiguous. |
|
XplError |
value=573 |
package=equipment |
The alarm is raised when an MDA reports persistent XPL Errors. |
|
MrpAttrTblSizeLimitReached |
value=574 |
package=l2fwd |
The alarm is raised when the number of MRP attribute table entries for a service site exceeds the high watermark specified by l2fwd.SiteMrp.mrpAttrTblHighWatermark. The alarm clears when the number of MRP attribute table entries for the site drops below the low watermark specified by l2fwd.SiteMrp.mrpAttrTblLowWatermark. |
|
MldDown |
value=587 |
package=mld |
The alarm is raised when an MLD site has an Operational State other than Up, and the Administrative State is Up. |
|
svcFdbMimDestTableFull |
value=588 |
package=netw |
The alarm is raised when the number of backbone MAC address indices on an NE reaches the maximum allowed value. The alarm clears when the number of backbone MAC address indices on the NE falls below 95 percent of the maximum allowed value. |
|
SiteSyncDeploymentFailure |
value=589 |
package=sonet |
The alarm is raised when the NFM-P tries to deploy a value for an object when a transaction that involves the object is in progress from a different context. |
|
TunnelOverbooked |
value=590 |
package=svt |
The alarm is raised when the allocated SDP binding bandwidth specified by sdpBookedBandwidth exceeds the sdpMaxBookableBandwidth value. |
|
AddressMisconfiguration |
value=591 |
package=service |
The alarm is raised when B-VPLS site addresses are misconfigured. The EpipeBackboneMacAddressMismatch probable cause indicates that the backbone destination MAC address does not match the backbone source MAC address of the site on the destination NE. The BVplsSourceMacAddressDuplicate probable cause indicates that there are duplicate backbone source MAC addresses. |
|
IsidMisconfiguration |
value=592 |
package=vpls |
The alarm is raised when service sites use inconsistent I-SID values for a PBB backbone. The alarm is raised against a VPLS or M-VPLS service. |
|
IsidMisconfiguration |
value=592 |
package=epipe |
The alarm is raised when Epipe service sites that are bound to a PBB backbone use different ISID values. |
|
PChipError |
value=593 |
package=equipment |
The alarm is raised when persistent FCS errors are detected on the specified complex in the specified direction. |
|
BgpRouteChangeThresholdPerRTargetReached |
value=600 |
package=topology |
The alarm is raised when the number of BGP route changes for a route target reaches the maximum threshold value for route targets. |
|
BgpRouteChangeThresholdPerNHopReached |
value=601 |
package=topology |
The alarm is raised when the number of BGP route changes for a next hop reaches the maximum threshold value for a next hop. |
|
RouterLimitExceedDueToMultiAdditions |
value=602 |
package=security |
The alarm is raised when the 5650 CPAM cannot discover one or more routers because the license capacity is reached. |
|
BidirIpPathMonitorPathsDiverge |
value=603 |
package=monpath |
The alarm is raised when the 5650 CPAM detects that the IP paths of a bidirectional IP path monitor diverge. The alarm clears when the paths converge. This may occur when an IP path monitor cannot be set up after the number of attempts specified by the cpamManagedRoute problematicThresholdAlarmAfter value in the nms-server.xml file. The alarm is raised if the cpamManagedRoute problematicRetryStrategy value in nms-server.xml is set to countdown. The default problematicRetryStrategy value of reactive prevents the alarm from being raised. |
|
EquipmentDegraded |
value=604 |
package=equipment |
The alarm is raised when a single fan fails. The chassis attempts to continue operating within the normal temperature range using only the remaining fans. |
|
PChipMemoryEvent |
value=608 |
package=equipment |
The alarm is raised when a P chip detects a memory parity error. The alarm is raised against a 7450 ESS, 7710 SR, or 7750 SR. The alarm is raised against a Release 6.0 NE at R10 or later and a Release 6.1 NE at R5 or later. |
|
IncorrectNeighborConfig |
value=609 |
package=aps |
The alarm is raised when the peer does not exist or the neighbor address does not point to a network interface on the NE that contains the peer object. |
|
DeployProfileFailed |
value=610 |
package=autoconfig |
The alarm is raised when the deployment of a script to a 7705 SAR fails. |
|
DatabaseRedundancyArchiveGap |
value=611 |
package=db |
The alarm is raised when the primary NFM-P main server detects an archive log gap. An archive log gap occurs when a number of archive logs cannot be applied to the standby database. The alarm may indicate that the primary database is out of archive log disk space, the standby database has been down for too long, or the standby database is not able to process the archive logs at the rate that the primary database sends them. The alarm clears after a standby database reinstantiation, which corrects the archive log gap. The alarm is raised only in a redundant NFM-P system. |
|
InstallDirectoryDiskSpaceBelowThreshold |
value=612 |
package=db |
The alarm is raised when the primary or standalone database installation disk space threshold specified in the nms-server.xml file is reached. |
|
RealignmentOfDatabase |
value=613 |
package=db |
The alarm is raised when the primary NFM-P main server realigns itself with the preferred database by performing a database switchover to connect to the primary database. |
|
RealignmentOfDatabaseFailed |
value=614 |
package=db |
The alarm is raised when a database switchover to realign the primary main server and primary database fails. The primary main server is not connected to the preferred database. |
|
StandbyInstallDirectoryDiskSpaceBelowThreshold |
value=615 |
package=db |
The alarm is raised when the standby database installation disk space threshold specified in the nms-server.xml file is reached. |
|
BatteryFail |
value=616 |
package=mpr |
The alarm is raised when the battery fails or is missing. |
|
BatteryFail |
value=616 |
package=equipment |
The alarm is raised when the battery fails or is missing. |
|
BootLoaderFirmwareMismatchAlarm |
value=617 |
package=equipment |
The alarm is raised when there is a mismatch between the firmware version and the software image on an NE. The alarm information includes the discovered and expected version identifiers. |
|
CardCPUAboveThreshold |
value=618 |
package=equipment |
The alarm is raised when the card CPU usage exceeds the threshold value. |
|
CardMemoryAboveThreshold |
value=619 |
package=equipment |
The alarm is raised when the card memory usage exceeds the threshold value. |
|
CardRxAboveThreshold |
value=620 |
package=equipment |
The alarm is raised when the card Rx exceeds the threshold value. |
|
CardRxTxAboveThreshold |
value=621 |
package=equipment |
The alarm is raised when the card Tx exceeds the threshold value. |
|
Degrade |
value=622 |
package=ptp |
The alarm is raised when a degraded signal is detected. |
|
Degrade |
value=622 |
package=equipment |
The alarm is raised when a degraded signal is detected. |
|
DyingGaspSignal |
value=623 |
package=equipment |
The alarm is raised when a Dying Gasp signal is received from a remote 7210 SAS to indicate a power loss/from a remote node to indicate EFM-OAM is disabled on the connected remote port. |
|
FanFailure |
value=624 |
package=equipment |
The alarm is raised when the associated fan is not operationally Up. |
|
FanFailure |
value=624 |
package=mwa |
This alarm is raised when a MPT detects a fan failure. |
|
FibOutOfSynch |
value=625 |
package=equipment |
The alarm is raised when the FIB on an MDA is out of synchronization. |
|
FirmwareDownloadOnGoing |
value=626 |
package=mpr |
The alarm is raised when a firmware download is in progress. |
|
FirmwareDownloadOnGoing |
value=626 |
package=equipment |
The alarm is raised when a firmware download is in progress. |
|
InternalCommunicationProblem |
value=627 |
package=equipment |
The alarm is raised when an ODU is unresponsive. |
|
InternalCommunicationProblem |
value=627 |
package=mpr |
The alarm is raised when an MPTHLv2 is unresponsive. |
|
LanFailure |
value=628 |
package=equipment |
The alarm is raised when a LAN failure is detected. |
|
LossOfAlignment |
value=629 |
package=equipment |
The alarm is raised when a Loss of Alignment signal is detected. |
|
LossOfFrame |
value=630 |
package=optical |
The alarm is raised when Loss of frame is detected. |
|
LossOfFrame |
value=630 |
package=radioequipment |
The alarm is raised when an LOF is detected on a port. |
|
LossOfFrame |
value=630 |
package=equipment |
The alarm is raised when an LOF is detected on a port. |
|
LossOfSignal |
value=631 |
package=equipment |
The alarm is raised when a Loss of Signal is detected on a port. |
|
LossOfSignal |
value=631 |
package=optical |
The alarm is raised when Loss of Signal is detected. |
|
PPPFail |
value=632 |
package=equipment |
The alarm is raised when a PPP IP Fail condition is detected. |
|
PowerSupplyFailure |
value=633 |
package=equipment |
The alarm is raised when a power-supply tray reports a failure. When the alarm is raised during device discovery, a power-supply tray may be out of service. When the alarm is raised while the device is in the managed state, a power-supply tray may be out of service or the AC or DC power shelf has a fault condition. The alarm clears when the status changes to OK. |
|
ProvisioningMismatch |
value=634 |
package=equipment |
The alarm is raised when a license mismatch is detected for provisioned equipment. |
|
ReplaceableUnitMissing |
value=635 |
package=equipment |
The alarm is raised when a device detects that a provisioned card is not physically present. |
|
ReplaceableUnitMissing |
value=635 |
package=mpr |
The alarm is raised when a device detects that a provisioned MPT is not physically present. |
|
ReplaceableUnitProblem |
value=636 |
package=mpr |
The alarm is raised when a card fails. |
|
ReplaceableUnitProblem |
value=636 |
package=equipment |
The alarm is raised when a card fails. |
|
ReplaceableUnitTypeMismatch |
value=637 |
package=equipment |
The alarm is raised when there is a mismatch between the installed card type and the expected card type. |
|
ReplaceableUnitTypeMismatch |
value=637 |
package=mpr |
The alarm is raised when there is a mismatch between the installed equipment type and the expected equipment type. |
|
ShelfCPUAboveThreshold |
value=638 |
package=equipment |
The alarm is raised when shelf CPU usage exceeds the threshold value. |
|
ShelfMemoryAboveThreshold |
value=639 |
package=equipment |
The alarm is raised when shelf memory usage exceeds the threshold value. |
|
ShelfRxAboveThreshold |
value=640 |
package=equipment |
The alarm is raised when shelf Rx exceeds the threshold value. |
|
ShelfRxTxAboveThreshold |
value=641 |
package=equipment |
The alarm is raised when shelf Tx exceeds the threshold value. |
|
ShelfTemperatureAboveThreshold |
value=642 |
package=equipment |
The alarm is raised when shelf temperature exceeds the threshold value. |
|
UnavailableTime |
value=644 |
package=equipment |
The alarm is raised when a port experiences 10 consecutive SES. |
|
UnavailableTime |
value=644 |
package=radioequipment |
The alarm is raised when a port experiences 10 consecutive SES. |
|
UnconfiguredEquipmentPresent |
value=645 |
package=equipment |
The alarm is raised when unconfigured equipment is detected. |
|
VersionMismatch |
value=646 |
package=equipment |
The alarm is raised when an ODU software version mismatch is detected. |
|
VersionMismatch |
value=646 |
package=mpr |
The alarm is raised when an ODU software version mismatch is detected. |
|
IsaAaGrpDown |
value=647 |
package=isa |
The alarm is raised when an ISA-AA group Operational State is Down, and the Administrative State is Up. |
|
CircuitStpExceptionCondition |
value=648 |
package=l2fwd |
The alarm is raised when an NE detects an STP exception condition on a SAP, for example, one-way communication or a downstream loop. The alarm clears when the STP status changes. |
|
MVPNDuplicateVrfPolicy |
value=649 |
package=l3fwd |
The alarm is raised when the NFM-P detects a duplicate VRF policy in a multicast VPRN. The alarm information includes the VRF policy ID and type, and information about the service site. Note: starting from SAM 12.0 R1, NFM-P no longer raise this alarm since it is not much useful but has performance issue. |
|
MVPNExportPolicyNotFound |
value=650 |
package=l3fwd |
The alarm is raised when a VRF export policy for a multicast VPRN cannot be found. The alarm information includes the policy ID. Note: starting from SAM 12.0 R1, NFM-P no longer raise this alarm since it is not much useful but has performance issue. |
|
MVPNImportPolicyNotFound |
value=651 |
package=l3fwd |
The alarm is raised when a VRF import policy for a multicast VPRN cannot be found. The alarm information includes the policy ID. Note: starting from SAM 12.0 R1, NFM-P no longer raise this alarm since it is not much useful but has performance issue. |
|
LinkAggMemberMisconfigured |
value=652 |
package=lag |
The alarm is raised when one or more misconfigured LAG members are detected, for example, when some LAG members are in access mode and some are in network mode. |
|
LinkAggModeMisconfigured |
value=653 |
package=lag |
The alarm is raised when the LAG mode differs from the mode of one or more LAG members, for example, when the LAG mode is access and the LAG members are in network mode. |
|
LinkAggPortJoin |
value=654 |
package=lag |
The alarm is raised when a LAG port joins a LAG by entering the attached state. |
|
LinkAggPortLeave |
value=655 |
package=lag |
The alarm is raised when a LAG port leaves a LAG by exiting the attached state. |
|
LinkAggPortRemove |
value=656 |
package=lag |
The alarm is raised when a LAG port is removed from a LAG because of an invalid configuration. |
|
DiscoveredPhysicalLinkMismatch |
value=657 |
package=netw |
The alarm is raised when one endpoint of a physical link is used as an endpoint in another physical link. |
|
DuplicatePhysicalLinks |
value=658 |
package=netw |
The alarm is raised when there is more then one physical link configured between two endpoints. |
|
PatchLevelMismatch |
value=659 |
package=netw |
The alarm is raised when the NFM-P primary main server software patch level does not match the standby main server software patch level. |
|
InterfaceNeighborDown |
value=661 |
package=ospf |
The alarm is raised when an interface neighbor is operationally down. |
|
OspfIfTxRetransmit |
value=662 |
package=ospf |
The alarm is raised when an NE retransmits an OSPF packet. The alarm information includes the NE ID of the OSPF neighbor. The alarm is not raised against a Release 4.0 or later NE. |
|
ShamLinkDbDescriptAuthFailure |
value=663 |
package=ospf |
The alarm is raised when an NE receives a dbDescript packet on a sham link from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
ShamLinkDbDescriptConfig |
value=664 |
package=ospf |
The alarm is raised when an NE receives a dbDescript packet on a sham link from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
ShamLinkDown |
value=665 |
package=ospf |
The alarm is raised when a sham link is operationally down. |
|
ShamLinkHelloAuthFailure |
value=666 |
package=ospf |
The alarm is raised when an NE receives a hello packet on a sham link from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
ShamLinkHelloConfig |
value=667 |
package=ospf |
The alarm is raised when an NE receives a hello packet on a sham link from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
ShamLinkLsAckAuthFailure |
value=668 |
package=ospf |
The alarm is raised when an NE receives an lsAck packet on a sham link from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
ShamLinkLsAckConfig |
value=669 |
package=ospf |
The alarm is raised when an NE receives an lsAck packet on a sham link from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
ShamLinkLsReqAuthFailure |
value=670 |
package=ospf |
The alarm is raised when an NE receives an lsReq packet on a sham link from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
ShamLinkLsReqConfig |
value=671 |
package=ospf |
The alarm is raised when an NE receives an lsReq packet on a sham link from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
ShamLinkLsUpdateAuthFailure |
value=672 |
package=ospf |
The alarm is raised when an NE receives an lsUpdate packet on a sham link from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
ShamLinkLsUpdateConfig |
value=673 |
package=ospf |
The alarm is raised when an NE receives an lsUpdate packet on a sham link from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
ShamLinkNullPacketAuthFailure |
value=674 |
package=ospf |
The alarm is raised when an NE receives a null packet on a sham link from an NE whose authentication key or authentication type conflicts with the local NE authentication key or authentication type. |
|
ShamLinkNullPacketConfig |
value=675 |
package=ospf |
The alarm is raised when an NE receives a null packet on a sham link from an NE whose configuration parameters conflict with the local NE configuration parameters. |
|
ShamLinkRxBadPacket |
value=676 |
package=ospf |
The alarm is raised when an NE cannot parse an OSPF packet that it receives on a sham link. |
|
CableLOS |
value=678 |
package=equipment |
The alarm is raised when an MSS detects a cable LOS event. |
|
CableLOS |
value=678 |
package=radioequipment |
The alarm is raised when an MSS detects a cable LOS event. |
|
CrossConnectionFail |
value=679 |
package=equipment |
The alarm is raised when an MSS TDM cross-connection fails. |
|
CrossConnectionFail |
value=679 |
package=radioequipment |
The alarm is raised when an MSS TDM cross-connection fails. |
|
DemFail |
value=680 |
package=equipment |
The alarm is raised when an MSS demodulation function fails. |
|
DemFail |
value=680 |
package=radioequipment |
The alarm is raised when an MSS demodulation function fails. |
|
EarlyWarning |
value=681 |
package=radioequipment |
The alarm is raised when an MSS detects an early warning event. |
|
EarlyWarning |
value=681 |
package=mwa |
The alarm is raised when a MPT detects an early warning event. |
|
EarlyWarning |
value=681 |
package=equipment |
The alarm is raised when an MSS detects an early warning event. |
|
HighBER |
value=682 |
package=radioequipment |
The alarm is raised when an MSS detects a high BER. |
|
HighBER |
value=682 |
package=mwa |
The alarm is raised when a MPT detects a high BER. |
|
HighBER |
value=682 |
package=equipment |
The alarm is raised when an MSS detects a high BER. |
|
IncompatibleFrequency |
value=683 |
package=equipment |
The alarm is raised when a provisioned MSS frequency is incompatible with the MSS hardware. |
|
IncompatibleFrequency |
value=683 |
package=radioequipment |
The alarm is raised when a provisioned MSS frequency is incompatible with the MSS hardware. |
|
IncompatibleFrequency |
value=683 |
package=mwa |
The alarm is raised when a provisioned MPT frequency is incompatible with the MPT hardware. |
|
IncompatiblePTX |
value=684 |
package=equipment |
The alarm is raised when the provisioned MSS transmit power is incompatible with the MSS hardware. |
|
IncompatiblePTX |
value=684 |
package=radioequipment |
The alarm is raised when the provisioned MSS transmit power is incompatible with the MSS hardware. |
|
IncompatibleShifter |
value=685 |
package=equipment |
The alarm is raised when the provisioned MSS shifter parameters are incompatible with the MSS hardware. |
|
IncompatibleShifter |
value=685 |
package=radioequipment |
The alarm is raised when the provisioned MSS shifter parameters are incompatible with the MSS hardware. |
|
IncompatibleShifter |
value=685 |
package=mwa |
The alarm is raised when the provisioned MPT shifter parameters are incompatible with the MPT hardware. |
|
LinkIdentifierMismatch |
value=686 |
package=equipment |
The alarm is raised when an MSS detects a link identifier mismatch. |
|
LinkIdentifierMismatch |
value=686 |
package=radioequipment |
The alarm is raised when an MSS detects a link identifier mismatch. |
|
LinkIdentifierMismatch |
value=686 |
package=mwa |
The alarm is raised when a MPT detects a link identifier mismatch. |
|
RxFail |
value=687 |
package=radioequipment |
The alarm is raised when an MSS detects a receive failure. |
|
RxFail |
value=687 |
package=equipment |
The alarm is raised when an MSS detects a receive failure. |
|
ResiliencySapDeleted |
value=688 |
package=resiliency |
The alarm is raised when a SAP that is used for resiliency is deleted. |
|
ResiliencyServiceSwitch |
value=689 |
package=resiliency |
The alarm is raised when a secondary service becomes active. |
|
ResiliencySiteDeleted |
value=690 |
package=resiliency |
The alarm is raised when a secondary service site is deleted. |
|
SasAccountingAlarm |
value=691 |
package=sas |
The alarm is raised when the NFM-P cannot find an SAA Accounting Policy. |
|
CpamTimedLicenseExpiryNotice |
value=692 |
package=security |
The alarm is raised when the 5650 CPAM license timer expires. The alarm information includes the license expiry date. |
|
LicenseMisMatch |
value=693 |
package=security |
The alarm is raised when the primary 5650 CPAM server license does not match the standby 5650 CPAM server license. |
|
Licensed3RouterLimitExceeded |
value=694 |
package=security |
The alarm is raised when the number of third-party routers in the 5650 CPAM network reaches 100 percent of the license capacity. |
|
Licensed3RouterLimitNearing |
value=695 |
package=security |
The alarm is raised when the number of third-party routers in the 5650 CPAM network reaches 75 to 90 percent of the license capacity. |
|
Licensed3RouterLimitNearlyExceeded |
value=696 |
package=security |
The alarm is raised when the number of third-party routers in the 5650 CPAM network reaches 90 to 100 percent of the license capacity. |
|
LicensedBigRouterLimitExceeded |
value=709 |
package=security |
The alarm is raised when the number of Nokia large routers in the network reaches 100 percent of the 5650 CPAM license capacity. |
|
LicensedBigRouterLimitNearing |
value=710 |
package=security |
The alarm is raised when the number of Nokia large routers in the network reaches 75 to 90 percent of the 5650 CPAM license capacity. |
|
LicensedBigRouterLimitNearlyExceeded |
value=711 |
package=security |
The alarm is raised when the number of Nokia large routers in the network reaches 90 to 100 percent of the 5650 CPAM license capacity. |
|
LicensedImpactAnalysisRouterLimitExceeded |
value=712 |
package=security |
The alarm is raised when the number of routers in a simulation scenario reaches 100 percent of the license capacity. |
|
LicensedImpactAnalysisRouterLimitNearing |
value=713 |
package=security |
The alarm is raised when the number of routers in a simulation scenario reaches 75 to 90 percent of the license capacity. |
|
LicensedImpactAnalysisRouterLimitNearlyExceeded |
value=714 |
package=security |
The alarm is raised when the number of routers in a simulation scenario reaches 90 to 100 percent of the license capacity. |
|
LicensedIpPathLimitExceeded |
value=715 |
package=security |
The alarm is raised when the number of IP path monitors in the 5650 CPAM reaches 100 percent of the license capacity. |
|
LicensedIpPathLimitNearing |
value=716 |
package=security |
The alarm is raised when the number of IP path monitors in the 5650 CPAM reaches 75 to 90 percent of the license capacity. |
|
LicensedIpPathLimitNearlyExceeded |
value=717 |
package=security |
The alarm is raised when the number of IP path monitors in the 5650 CPAM reaches 90 to 100 percent of the license capacity. |
|
LicensedMcRouterLimitExceeded |
value=718 |
package=security |
The alarm is raised when the number of multicast routers in the 5650 CPAM reaches 100 percent of the license capacity. |
|
LicensedMcRouterLimitNearing |
value=719 |
package=security |
The alarm is raised when the number of multicast routers in the 5650 CPAM reaches 75 to 90 percent of the license capacity. |
|
LicensedMcRouterLimitNearlyExceeded |
value=720 |
package=security |
The alarm is raised when the number of multicast routers in the 5650 CPAM reaches 90 to 100 percent of the license capacity. |
|
LicensedSmallRouterLimitExceeded |
value=727 |
package=security |
The alarm is raised when the number of Nokia small routers in the network reaches 100 percent of the 5650 CPAM license capacity. |
|
LicensedSmallRouterLimitNearing |
value=728 |
package=security |
The alarm is raised when the number of Nokia small routers in the network reaches 75 to 90 percent of the 5650 CPAM license capacity. |
|
LicensedSmallRouterLimitNearlyExceeded |
value=729 |
package=security |
The alarm is raised when the number of Nokia small routers in the network reaches 90 to 100 percent of the 5650 CPAM license capacity. |
|
ClientDelegateServerMaxUIExceeded |
value=730 |
package=server |
The alarm is raised when the total number of client GUI sessions on a client delegate server reaches or exceeds the configured maximum value. |
|
ClientDelegateServerStatus |
value=731 |
package=server |
The alarm is raised when a client delegate server is unreachable. |
|
HostnameMismatch |
value=732 |
package=server |
The alarm is raised when an auxiliary or standby server host name in a NFM-P main server configuration does not match the host name of the auxiliary or standby server /etc/hosts file. |
|
OneWayCommunication |
value=733 |
package=server |
The alarm is raised when a main server cannot communicate with an auxiliary server, but the auxiliary server can communicate with the main server. |
|
TimingHoldover |
value=734 |
package=equipment |
The alarm is raised when the Standby CPM goes into or out of Timing holdover state. |
|
TimingHoldover |
value=734 |
package=sonet |
The alarm is raised when the timing of an NE is in the Holdover state. |
|
IgmpSnpgSrcDroppedLimitExceeded |
value=735 |
package=svt |
The alarm is raised when an IGMP source is removed from an SDP binding because the number of allowed IGMP sources specified by sdpBndIgmpSnpgCfgMaxNbrSrcs is reached. |
|
IgmpSnpgSrcDroppedLimitExceeded |
value=735 |
package=vpls |
The alarm is raised when an IGMP source is removed from a SAP because the number of allowed IGMP sources specified by sapIgmpSnpgCfgMaxNbrGrps is reached. |
|
Ais |
value=736 |
package=equipment |
The alarm is raised when an NE reports an AIS condition on the Tx or Rx circuit of a PDH tributary. |
|
PacingInProgressWarning |
value=737 |
package=tunnelmgmt |
The alarm is raised when tunnel creation or deletion is not performed after a member is added or removed from a rule group because topology rule pacing is in progress. When this occurs, the Reapply and Delete Unused operations must be performed manually when the pacing is complete. The alarm clears after a Reapply operation is performed. |
|
SdpMldSnpgGrpDroppedLimitExceeded |
value=738 |
package=vpls |
The alarm is raised when an SDP binding drops an MLD group because the configurable maximum number of MLD groups on the SDP binding is reached. |
|
SiteBgpAdVplsIdMisconfiguration |
value=739 |
package=vpls |
The alarm is raised when the configured VPLS ID on a BGP AD object differs from the VPLS ID configured for the VPLS site. |
|
msapCreationFailure |
value=740 |
package=vpls |
The alarm is raised when an NE notifies the NFM-P that it cannot create an MSAP. |
|
AdvNotActivated |
value=741 |
package=vrrp |
The alarm is raised when the parent interface of an IPv6 VR instance is not configured to send router advertisements, or when router advertisement is not configured to use the virtual MAC address. |
|
CrossconnectDown |
value=744 |
package=mpr |
The alarm is raised when the Operational State of an L2 or L3 interface is Down, and the Administrative State of the associated site is Up. The alarm is not raised against an L2 access interface that is in the MC ring standby state. |
|
DatabaseBackupRsyncFailed |
value=749 |
package=db |
The alarm is raised when one or more database backup files cannot be copied to the standby database station. |
|
DatafileSizeAboveThreshold |
value=750 |
package=db |
The alarm is raised when a tablespace data file size exceeds the used space threshold. |
|
PrimaryDatabaseDown |
value=751 |
package=db |
The alarm is raised when the primary NFM-P database is down for at least one poll. The alarm is not persisted in the database or stored in the alarm history; when the database returns to service, the PrimaryDatabaseWasDown alarm is raised. |
|
FIBHighOccupancy |
value=752 |
package=equipment |
The alarm is raised when the FIB occupancy on an IOM card changes from normal to high. |
|
MigrationCompleted |
value=753 |
package=equipment |
The alarm is raised when a card migration event completes. |
|
MigrationFailed |
value=754 |
package=equipment |
The alarm is raised when a card migration event fails. |
|
OTUAlarmIndicationSignal |
value=755 |
package=ethernetequipment |
The alarm is raised when a device reports an AIS on an OTU-enabled interface. |
|
OTUBackwardDefectIndication |
value=756 |
package=ethernetequipment |
The alarm is raised when a device reports a BDI on an OTU-enabled interface. |
|
OTUBitErrorRateSignalDegradation |
value=757 |
package=ethernetequipment |
The alarm is raised when a device reports a BER-SD on an OTU-enabled interface. |
|
OTUBitErrorRateSignalFail |
value=758 |
package=ethernetequipment |
The alarm is raised when a device reports a BER-SF on an OTU-enabled interface. |
|
OTUFECRxTxModeMismatch |
value=759 |
package=ethernetequipment |
The alarm is raised when a device reports a FEC Rx/Tx mode mismatch on an OTU-enabled interface. |
|
OTUFECSignalDegradation |
value=760 |
package=ethernetequipment |
The alarm is raised when a device reports a FEC-SD on an OTU-enabled interface. |
|
OTUFECSignalFailure |
value=761 |
package=ethernetequipment |
The alarm is raised when a device reports a FEC-SF on an OTU-enabled interface. |
|
OTULossOfClock |
value=762 |
package=ethernetequipment |
The alarm is raised when a device reports an LOC on an OTU-enabled interface. |
|
OTULossOfFraming |
value=763 |
package=ethernetequipment |
The alarm is raised when a device reports an LOF on an OTU-enabled interface. |
|
OTULossOfMultiFrame |
value=764 |
package=ethernetequipment |
The alarm is raised when a device reports an LOM on an OTU-enabled interface. |
|
OTULossOfSignal |
value=765 |
package=ethernetequipment |
The alarm is raised when a device reports an LOS on an OTU-enabled interface. |
|
OTUODUAlarmIndicationSignal |
value=766 |
package=ethernetequipment |
The alarm is raised when a device reports an ODU AIS on an OTU-enabled interface. |
|
OTUODULocked |
value=767 |
package=ethernetequipment |
The alarm is raised when a device reports an ODU locked on an OTU-enabled interface. |
|
OTUODUOpenConnectionIndication |
value=768 |
package=ethernetequipment |
The alarm is raised when a device reports an ODU-OCI on an OTU-enabled interface. |
|
OTUPMBackwardDefectIndication |
value=769 |
package=ethernetequipment |
The alarm is raised when a device reports a PM BDI on an OTU-enabled interface. |
|
OTUUncorrectableFECErrors |
value=770 |
package=ethernetequipment |
The alarm is raised when a device reports one or more uncorrectable FEC errors on an OTU-enabled interface. |
|
EthernetTunnelDown |
value=771 |
package=ethernettunnel |
The alarm is raised when the aggregated Ethernet tunnel Operational State is Down. |
|
apsCfgRaiseAlarm |
value=772 |
package=ethernettunnel |
The alarm is raised when the NFM-P detects a mismatch between the working and protection Ethernet tunnel group configurations. |
|
apsNoRspRaiseAlarm |
value=773 |
package=ethernettunnel |
The alarm is raised when an Ethernet tunnel group protection switch is incomplete, as indicated by a comparison of the transmitted 'Requested Signal' values and the received 'Bridged Signal' in the APS protocol. |
|
apsPrvsnRaiseAlarm |
value=774 |
package=ethernettunnel |
The alarm is raised when an Ethernet tunnel group provisioning mismatch is detected at the ETH layer. The mismatch is detected through a comparison of the transmitted and received APS protocol A, B and D bits. |
|
IsaVideoGrpDown |
value=775 |
package=isa |
The alarm is raised when the Operational State of an ISA video group is Down and the Administrative State is Up. |
|
McLagSourceBMacLsbMisconfigured |
value=776 |
package=multichassis |
The alarm is raised when the NFM-P detects a mismatch in the last 16 bits of the source backbone MAC address on the peer device. This mismatch prevents PBB access dual homing from operating. |
|
McLagSourceBMacLsbMisconfigured |
value=776 |
package=lag |
The alarm is raised when the NFM-P detects a mismatch in the last 16 bits of the source backbone MAC address on the peer device. This mismatch prevents PBB access dual homing from operating. |
|
S2LPathBypassTunnelActive |
value=777 |
package=mpls |
The alarm is raised when the bypass tunnel in an S2L path becomes active. The alarm clears when the bypass tunnel is no longer active, for example, because a primary tunnel failure is resolved or a new path is established. |
|
S2LPathDown |
value=778 |
package=mpls |
The alarm is raised when the S2L path Administrative State is Up and the Operational State is not Up. The alarm clears when the S2L path Operational State changes to Up or the Administrative State changes to Down. |
|
IncorrectPeerConfig |
value=779 |
package=multichassis |
The alarm is raised when an MC peer does not exist, or when an MC peer exists but the peer address is not the address of a network interface on the peer. |
|
IncorrectPeerSynchronizationPortConfig |
value=780 |
package=multichassis |
The alarm is raised when the peer port does not exist, or when the peer port exists but the synchronization tags of the peers do not match. |
|
IncorrectPeerSynchronizationPortEncapRangeConfig |
value=781 |
package=multichassis |
The alarm is raised when the VLAN ranges on the Multi-Chassis synchronization peers do not match. |
|
NoPeerMcRingFound |
value=782 |
package=multichassis |
The alarm is raised when the NFM-P cannot find the peer MC ring. |
|
GneCommunicationAlarm |
value=783 |
package=netw |
This user-definable alarm is raised against a generic NE when the NFM-P receives a trap from the generic NE that is mapped to the alarm in a generic NE alarm catalogue. The alarm mapping defines the Probable cause, Severity, and Implicitly cleared values, and optionally contains an extension that is appended to the Name value. |
|
GneEnvironmentalAlarm |
value=784 |
package=netw |
This user-definable alarm is raised against a generic NE when the NFM-P receives a trap from the generic NE that is mapped to the alarm in a generic NE alarm catalogue. The alarm mapping defines the Probable cause, Severity, and Implicitly cleared values, and optionally contains an extension that is appended to the Name value. |
|
GneEquipmentAlarm |
value=785 |
package=netw |
This user-definable alarm is raised against a generic NE when the NFM-P receives a trap from the generic NE that is mapped to the alarm in a generic NE alarm catalogue. The alarm mapping defines the Probable cause, Severity, and Implicitly cleared values, and optionally contains an extension that is appended to the Name value. |
|
GneProcessingErrorAlarm |
value=786 |
package=netw |
This user-definable alarm is raised against a generic NE when the NFM-P receives a trap from the generic NE that is mapped to the alarm in a generic NE alarm catalogue. The alarm mapping defines the Probable cause, Severity, and Implicitly cleared values, and optionally contains an extension that is appended to the Name value. |
|
GneQualityOfServiceAlarm |
value=787 |
package=netw |
This user-definable alarm is raised against a generic NE when the NFM-P receives a trap from the generic NE that is mapped to the alarm in a generic NE alarm catalogue. The alarm mapping defines the Probable cause, Severity, and Implicitly cleared values, and optionally contains an extension that is appended to the Name value. |
|
GneServiceAlarm |
value=788 |
package=netw |
This user-definable alarm is raised against a generic NE when the NFM-P receives a trap from the generic NE that is mapped to the alarm in a generic NE alarm catalogue. The alarm mapping defines the Probable cause, Severity, and Implicitly cleared values, and optionally contains an extension that is appended to the Name value. |
|
GneSystemAlarm |
value=789 |
package=netw |
This user-definable alarm is raised against a generic NE when the NFM-P receives a trap from the generic NE that is mapped to the alarm in a generic NE alarm catalogue. The alarm mapping defines the Probable cause, Severity, and Implicitly cleared values, and optionally contains an extension that is appended to the Name value. |
|
GneTransportAlarm |
value=790 |
package=netw |
This user-definable alarm is raised against a generic NE when the NFM-P receives a trap from the generic NE that is mapped to the alarm in a generic NE alarm catalogue. The alarm mapping defines the Probable cause, Severity, and Implicitly cleared values, and optionally contains an extension that is appended to the Name value. |
|
STMTestIdRangeMistmatch |
value=792 |
package=sas |
The alarm is raised when the NFM-P detects an STM test ID range mismatch between the primary and standby main servers. |
|
STMTestsOutsideRange |
value=793 |
package=sas |
The alarm is raised when the NFM-P detects one or more STM Tests that have IDs outside the specified range. |
|
VideoInterfaceDown |
value=794 |
package=service |
The alarm is raised when a video interface is operationally down. The alarm clears when the video interface is operationally up. |
|
BgpAsPathLenPerMonPrefThresholdReached |
value=795 |
package=topology |
The alarm is raised when the AS path length for a monitored BGP route reaches or exceeds the maximum threshold value. |
|
BgpMonPrefRedundancyLossThresholdReached |
value=796 |
package=topology |
The alarm is raised when the number of next hops for a monitored BGP route reaches or falls below the minimum threshold value. |
|
TrapMapperQueueFull |
value=797 |
package=trapmapper |
The alarm is raised when the NFM-P detects that the queue for traps that are to be mapped to alarms is full. Until queue space is available, the NFM-P drops traps that are to be mapped to alarms. |
|
TrailSignalFail |
value=798 |
package=bundle |
The alarm is raised when a a local or remote failure in an IMA group generates a Trail Signal Fail message. |
|
SychronizationLossOfSignal |
value=799 |
package=equipment |
The alarm is raised when an SLOS signal is detected on a PDH tributary. |
|
TemporaryCommunicationFailure |
value=800 |
package=equipment |
The alarm is raised when a temporary communication failure is detected. |
|
EthernetPortConfiguredLoopback |
value=801 |
package=ethernetequipment |
The alarm is raised when a timed loopback is in effect for an Ethernet port. |
|
LCD |
value=803 |
package=mpr |
The alarm is raised when a Loss of Cell Delineation signal is detected on an ASAP MDA. |
|
LIF |
value=804 |
package=mpr |
The alarm is raised when a Loss of IMA Frame signal is detected on an ASAP MDA. |
|
LODS |
value=805 |
package=mpr |
The alarm is raised when a Loss of Delay Synchronization signal is detected on an ASAP MDA. |
|
RDI |
value=806 |
package=mpr |
The alarm is raised when a Remote Defect Indication signal is detected on an ASAP MDA. |
|
SerialChannelLoopback |
value=807 |
package=tdmequipment |
The alarm is raised when an NE reports that a serial channel has a loopback alarm condition. |
|
SerialChannelOutOfFrame |
value=808 |
package=tdmequipment |
The alarm is raised when an NE reports that a serial channel has an OOF alarm condition. |
|
SerialChannelRemoteAlarmIndication |
value=809 |
package=tdmequipment |
The alarm is raised when an NE reports that a serial channel has an RAI condition. |
|
HoldTimeInconsistent |
value=810 |
package=bgp |
The alarm is raised when a BGP site tries to establish a peering using a hold time that is less than the configured strict hold time. The peering is rejected as a result. |
|
BWUtilizationExceeded |
value=811 |
package=netw |
The alarm is raised when the per-CoS or overall bandwidth utilization exceeds the configured threshold. |
|
ForceQTagForwardingMisconfiguration |
value=813 |
package=vpls |
The alarm is raised when two I-sites in a service use different Force Q Tag Forwarding values. |
|
ForceQTagForwardingMisconfiguration |
value=813 |
package=epipe |
The alarm is raised when two I-sites in a service use different Force Q Tag Forwarding values. |
|
PChipCAMEvent |
value=814 |
package=equipment |
The alarm is raised when an IOM or CPM experiences a P-chip CAM error. |
|
OTUBackwardIncomingAlignmentError |
value=815 |
package=ethernetequipment |
The alarm is raised when a device reports an ODU alarm indication signal on an OTU-enabled interface. |
|
OTUIncomingAlignmentError |
value=816 |
package=ethernetequipment |
The alarm is raised when a device reports an ODU open connection indication on an OTU-enabled interface. |
|
OTUOPUPSIPayloadTypeMismatch |
value=817 |
package=ethernetequipment |
The alarm is raised when a device reports a PM backward defect indication on an OTU-enabled interface. |
|
OTUOPUPSITraceMismatch |
value=818 |
package=ethernetequipment |
The alarm is raised when a device reports an ODU locked indication on an OTU-enabled interface. |
|
OTUPMTraceIDMismatch |
value=819 |
package=ethernetequipment |
The alarm is raised when a device reports an ODU open connection indication on an OTU-enabled interface. |
|
OTUTraceIdMismatch |
value=820 |
package=ethernetequipment |
The alarm is raised when a device reports a trace ID mismatch on an OTU-enabled interface. |
|
WaveTrackerEncoderDegrade |
value=821 |
package=ethernetequipment |
The alarm is raised when a device reports an encoder degradation on a wavelength tracker interface. |
|
WaveTrackerEncoderFailure |
value=822 |
package=ethernetequipment |
The alarm is raised when a device reports an encoder failure on a wavelength tracker interface. |
|
WaveTrackerPowerControlDegrade |
value=823 |
package=ethernetequipment |
The alarm is raised when a device reports a power control degradation on a wavelength tracker interface. |
|
WaveTrackerPowerControlFailure |
value=824 |
package=ethernetequipment |
The alarm is raised when a device reports a power control failure on a wavelength tracker interface. |
|
WaveTrackerPowerControlHighlimit |
value=825 |
package=ethernetequipment |
The alarm is raised when a device reports a power control high limit on a wavelength tracker interface. |
|
WaveTrackerPowerControllowlimit |
value=826 |
package=ethernetequipment |
The alarm is raised when a device reports a power control low limit on a wavelength tracker interface. |
|
IGHMisconfigured |
value=827 |
package=igh |
The alarm is raised when the IGH is administratively up but none of the IGH protocols is operationally up. |
|
CorporateAndSecuredCompositeServicesAreNotConnected |
value=828 |
package=ipsec |
The alarm is raised when the corporate and secured services used by an IPsec VPN do not have a connector between them. |
|
CorporateAndSecuredCompositeServicesMistmatch |
value=829 |
package=ipsec |
The alarm is raised when the corporate and secured services used by an IPsec VPN are in different composite services. |
|
IPSecGatewayDown |
value=830 |
package=ipsec |
The alarm is raised when the Operational State of a SAP IPsec gateway changes to Down and the Administrative State is Up. |
|
IPSecTunnelBfdConnectionBroken |
value=831 |
package=rtr |
The alarm is raised when the BFD connection to a peer times out. |
|
IPSecTunnelBfdConnectionBroken |
value=831 |
package=ipsec |
The alarm is raised when the BFD connection to a peer times out. |
|
IPSecTunnelBfdConnectionDown |
value=832 |
package=ipsec |
The alarm is raised when the Operational State of a BFD session is Not Connected. |
|
IPSecTunnelBfdConnectionDown |
value=832 |
package=rtr |
The alarm is raised when the Operational State of a BFD session is Not Connected. |
|
IPSecTunnelBfdConnectionPeerDetectsDown |
value=833 |
package=ipsec |
The alarm is raised when a BFD peer detects a connection timeout. |
|
IPSecTunnelBfdConnectionPeerDetectsDown |
value=833 |
package=rtr |
The alarm is raised when a BFD peer detects a connection timeout. |
|
IPSecTunnelDown |
value=834 |
package=ipsec |
The alarm is raised when the IPsec tunnel operational state changes to 'down' and the administrative state is 'up'. |
|
IPSecTunnelDown |
value=834 |
package=rtr |
The alarm is raised when the IPsec tunnel operational state changes to 'down' and the administrative state is 'up'. |
|
IsaAaGrpCapCostThres |
value=835 |
package=isa |
The alarm is raised when the capacity cost for an MDA in an ISA-AA group reaches the configured threshold. |
|
IsaAaSubUnassigned |
value=836 |
package=isa |
The alarm is raised when a subscriber cannot be assigned to an ISA-AA MDA in an AA group because of insufficient service queues, a high AA subscriber count, or a high AA subscriber statistics collection rate. The unassigned subscriber is treated as specified by the Operation Upon Failure parameter in the AA group. Recovery from this condition requires the removal and recreation of the AA subscriber when sufficient resources are available. |
|
IsisExportLimitDropped |
value=838 |
package=isis |
The alarm is raised when the number of routes exported from the route table to an IS-IS level drops below the Export Limit value for the level. |
|
IsisExportLimitReached |
value=839 |
package=isis |
The alarm is raised when the number of routes exported from the route table to an IS-IS level is equal to the Export Limit value for the level. |
|
IsisExportLimitWarning |
value=840 |
package=isis |
The alarm is raised when the number of routes exported from the route table to an IS-IS level is equal to the Export Limit percentage specified by the Export Limit Log Percent value. |
|
L2TPDown |
value=841 |
package=l2tp |
The alarm is raised when an L2TP site becomes administratively down. The alarm clears when the L2TP site becomes administratively up. |
|
PeerUnreachable |
value=842 |
package=l2tp |
The alarm is raised when an L2TP peer becomes unreachable. |
|
SingleSFMOverloadDetected |
value=843 |
package=l3fwd |
The alarm is raised when a device reports a single-SFM overload. The alarm clears when the VR exits the Overload state. |
|
MplsPathUpdateFailed |
value=1066 |
package=mpls |
The alarm is raised when an MPLS path update fails because of an MBB problem. The alarm clears when the MBB status changes to Successful. |
|
IncorrectEndPointPeerConfig |
value=1068 |
package=multichassis |
The alarm is raised when a peer configuration cannot be found on the peer NE. |
|
MCPeerEPDown |
value=1069 |
package=multichassis |
The alarm is raised when an MC endpoint is operationally down. |
|
NatIsaMemberSessionUsageHigh |
value=1070 |
package=nat |
Deprecated in 10.0, Use {NatIsaMemberSessionUsageHi on nat.IsaMember} instead. The alarm is raised when the session usage of an ISA-NAT group member reaches the high watermark. The alarm clears when the session usage reaches the low watermark. |
|
NatPlL2AwBlockUsageHigh |
value=1074 |
package=nat |
The alarm is raised when the block usage of an L2-aware NAT address pool reaches the high watermark. The alarm clears when the block usage reaches the low watermark. |
|
NatPlLsnMemberBlockUsageHigh |
value=1075 |
package=nat |
The alarm is raised when the block usage of a large-scale NAT address pool reaches the high watermark. The alarm clears when the block usage reaches the low watermark. |
|
FailureToSwitchManagementProtocol |
value=1076 |
package=netw |
The alarm is raised when the NFM-P cannot switch the management address of an NE from one IP version to another. |
|
InconsistenciesOnNode |
value=1077 |
package=netw |
The alarm is raised when a device detects one or more configuration inconsistencies. On a Wavence SM, this can be caused by cross-connect creation failure during service creation. |
|
ManagementIPSwitchUnsupported |
value=1078 |
package=netw |
The alarm is raised when an attempt is made to switch the management address of an NE from one IP version to another. |
|
NeManagementAndTrapManagementMismatch |
value=1079 |
package=netw |
This user-defined alarm is raised when the NE configuration is one of the following:
-
The Active Management IP is set to Out Of Band, and the Primary Route Preference is set to In Band.
-
The Active Management IP is set to In Band, and the Primary Route Preference is set to Out of Band.
|
|
NodeAlreadyManagedOverAnotherProtocol |
value=1080 |
package=netw |
The alarm is raised when the NFM-P tries to rediscover a previously discovered NE using a different IP version. |
|
RedundantRadioLink |
value=1081 |
package=netw |
The alarm is raised when a radio link is discovered between two nodes when there is already a physical link(s) between the same nodes. |
|
SvcNameUpgradeScriptFailed |
value=1082 |
package=netw |
The alarm is raised when a generated NE-upgrade CLI script fails. Typical causes include the following:
-
invalid CLI login information in the mediation policy
-
an unreachable NE Manual script execution from the NE properties form may provide more information about the failure.
|
|
TrapReceivingFailure |
value=1083 |
package=netw |
This user-defined alarm is raised when the NE is unable to send traps because the NE configuration is one of the following:
-
The Management IP Selection is set to Out Of Band Only, the Primary Route Preference is set to In Band, and the Secondary Route Preference is set to None.
-
The Management IP Selection is set to In Band Only, the Primary Route Preference is set to Out Of Band, and the Secondary Route Preference is set to None.
|
|
TrapRoutePreferenceRedundancyMissing |
value=1084 |
package=netw |
The user-defined alarm is raised when NE management redundancy is configured without trap route preference redundancy. |
|
NatL2AwSubIcmpPortUsageHigh |
value=1086 |
package=ressubscr |
The alarm is raised when the ICMP port usage of an L2-aware NAT subscriber reaches the high or low watermark. |
|
NatL2AwSubSessionUsageHigh |
value=1087 |
package=ressubscr |
The alarm is raised when the session usage of an L2-aware NAT subscriber reaches the high or low watermark. |
|
NatL2AwSubTcpPortUsageHigh |
value=1088 |
package=ressubscr |
The alarm is raised when the TCP port usage of an L2-aware NAT subscriber reaches the high or low watermark. |
|
NatL2AwSubUdpPortUsageHigh |
value=1089 |
package=ressubscr |
The alarm is raised when the UDP port usage of an L2-aware NAT subscriber reaches the high or low watermark. |
|
ripRouteMaxLimitReached |
value=1090 |
package=rip |
The alarm is raised when the number of RIP routes learned by an NE exceeds the maximum specified in the RIP configuration of the NE. |
|
ManagementAccessFilterMisconfiguredIpv6 |
value=1112 |
package=sitesec |
The alarm is raised when an IPv6 MAF is misconfigured. |
|
HashLabelMismatch |
value=1113 |
package=vprn |
The alarm is raised when the hash label is enabled on a VPRN site and disabled on another site in the service. |
|
HashLabelMismatch |
value=1113 |
package=svt |
The alarm is raised when an SDP binding hash label is enabled and the return SDP binding hash label is disabled. If this misconfiguration causes the mismatch of the operational hash label on both sides, the receiving site will drop the data packets as a result. This alarm is cleared when the hash label is either enabled or disabled on both sides. |
|
BgpMonPrefixUnreachable |
value=1114 |
package=topology |
The alarm is raised when no route for the monitored prefix is detected. |
|
MaxNumExportRoutesReached |
value=1116 |
package=vprn |
The alarm is raised when the number of routes exported from a route table to a VRF reaches the configured maximum. |
|
DatabaseBackupInvalidConfig |
value=1117 |
package=db |
The alarm is raised when the directory location specified for database scheduled backups is empty. |
|
ExcessiveEnvironmentTemperature |
value=1118 |
package=netw |
The alarm is raised when Wavence MSS Shelf is overheated. |
|
ExcessiveEnvironmentTemperature |
value=1118 |
package=mpr |
The alarm is raised when MPT is overheated. |
|
ExcessiveEnvironmentTemperature |
value=1118 |
package=equipment |
The alarm is raised when MPT is overheated. |
|
ExcessiveEnvironmentTemperature |
value=1118 |
package=mwa |
This alarm is raised when a MPT detects excessive environmental temperature. |
|
IsaLnsGrpDown |
value=1119 |
package=isa |
The alarm is raised when the Operational State of an ISA-LNS group is Down and the Administrative State is Up. |
|
MplsResignalTimerExpired |
value=1121 |
package=mpls |
The alarm is raised when an MPLS instance resignal timer expires. |
|
LicenseKeyIsInvalid |
value=1122 |
package=security |
The alarm is raised when the NFM-P server configuration is updated with a new license key and the license key is not valid. |
|
UserSuspended |
value=1123 |
package=security |
The alarm is raised when a user account is suspended. |
|
AtcaFanFailure |
value=1124 |
package=equipment |
The alarm is raised when the associated fan is not operationally Up. |
|
AtcaPowerSupplyFailure |
value=1125 |
package=equipment |
The alarm is raised when the associated power supply is not operationally Up. |
|
FanRPMAlarm |
value=1126 |
package=equipment |
The alarm is raised when a fan alarm usage state is other than Normal. |
|
LowTemperatureDetected |
value=1127 |
package=equipment |
The alarm is raised when the chassis temperature falls below the minimum threshold. |
|
LowTemperatureThresholdCrossed |
value=1128 |
package=equipment |
The alarm is raised when a low-temperature threshold is crossed. |
|
PowerSupplyVoltageAlarm |
value=1129 |
package=equipment |
The alarm is raised when the power supply voltage alarm state changes to a value other than Normal. |
|
RetimingBufferOverFlow |
value=1130 |
package=equipment |
The alarm is raised when an retiming buffer overflow occurs. |
|
UnderlyingResourceUnavailable |
value=1131 |
package=equipment |
The alarm is raised when an underlying resource is unavailable on an E1, radio, or Ethernet interface. |
|
PhysicalLinkDown |
value=1140 |
package=netw |
The alarm is raised when the physical link is operationally down. |
|
InvalidBOFAddress |
value=1141 |
package=netw |
The alarm is raised during a network topology rescan in which the NFM-P does not find a previously configured NE BOF address, and the Management IP Selection of the NE is set to one of the following:
-
Out Of Band Preferred
-
In Band Preferred
|
|
AtpcLoopProblem |
value=1142 |
package=equipment |
The alarm is raised when a local transmitter was operating continuously at full power for 5-minutes, and the transmitter power is reduced to its minimum power setting. |
|
AtpcLoopProblem |
value=1142 |
package=radioequipment |
The alarm is raised when a local transmitter was operating continuously at full power for 5-minutes, and the transmitter power is reduced to its minimum power setting. |
|
BandwidthOverFlow |
value=1143 |
package=equipment |
The alarm is raised when a MPT is on-line and the cross-connections occupation overcomes the MPT net capacity bandwidth. |
|
BandwidthOverFlow |
value=1143 |
package=radioequipment |
The alarm is raised when a MPT is on-line and the cross-connections occupation overcomes the MPT net capacity bandwidth. |
|
IncompatibleModulationParam |
value=1144 |
package=radioequipment |
The alarm is raised when the configured modulation parameters are not supported by MPT (or) when XPIC is configured on an MPT that does not allow XPIC capability. |
|
IncompatibleModulationParam |
value=1144 |
package=equipment |
The alarm is raised when the configured modulation parameters are not supported by MPT (or) when XPIC is configured on an MPT that does not allow XPIC capability. |
|
IncompatibleModulationParam |
value=1144 |
package=mwa |
The alarm is raised when the provisioned modulation parameters are incompatible with the MPT hardware. |
|
LoopProblem |
value=1145 |
package=radioequipment |
The alarm is raised when there is a loss of communication command path between far end transmitter and local receiver . |
|
LoopProblem |
value=1145 |
package=equipment |
The alarm is raised when there is a loss of communication command path between far end transmitter and local receiver . |
|
VLanUplinkDown |
value=1146 |
package=service |
The alarm is raised when a VLAN uplink is operationally down. |
|
VLanUplinkNotCreated |
value=1147 |
package=service |
The alarm is raised when an expected VLAN uplink does not exist. |
|
VoiceChannelLoopback |
value=1148 |
package=tdmequipment |
The alarm is raised when an NE reports that a voice channel has a loopback alarm condition. |
|
CreditControlInsertSpaceThresholdAlarm |
value=1149 |
package=aclfilter |
The alarm is raised when the utilization of a filter entry range that is reserved for filter entry insertion increases to the configured maximum value for a credit control application insert range. |
|
CreditControlInsertedFltrEntryDropped |
value=1150 |
package=aclfilter |
The alarm is raised when a request to insert a filter entry is not successful for a credit control application. |
|
RadiusInsertSpaceThresholdAlarm |
value=1151 |
package=aclfilter |
The alarm is raised when the utilization of a filter entry range that is reserved for filter entry insertion increases to the configured maximum value for a RADIUS application insert range. |
|
RadiusInsertedFltrEntryDropped |
value=1152 |
package=aclfilter |
The alarm is raised when a request to insert a filter entry is not successful for a RADIUS application. |
|
TestThresholdExceededAlarm |
value=1154 |
package=bier |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=ldp |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=svt |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=pim |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=monpath |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=ethernetoam |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=vll |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=mpls |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=mplstp |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=vprn |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=service |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=vpls |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=netw |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=atm |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=bgp |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=vlan |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=mirror |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm |
value=1154 |
package=rtr |
The alarm is raised when an OAM test on the object reports that the test threshold has been exceeded. |
|
AisRx |
value=1157 |
package=equipment |
The alarm is raised when there is a receiver alarm indication signal. |
|
AisTx |
value=1158 |
package=equipment |
The alarm is raised when there is a transmission alarm indication signal. |
|
AuxiliaryAlarm |
value=1159 |
package=equipment |
The alarm is raised when an NE reports that a configured auxiliary alarm condition has been triggered. |
|
CardMismatch |
value=1160 |
package=equipment |
The alarm is raised when Card mismatch is detected. |
|
CardUnseated |
value=1161 |
package=equipment |
The alarm is raised when a card is removed. |
|
ClockFailure |
value=1162 |
package=radioequipment |
The alarm is raised when an MPT radio clock failure occurs. |
|
ClockFailure |
value=1162 |
package=equipment |
The alarm is raised when an MPT radio clock failure occurs. |
|
DialogFailure |
value=1163 |
package=equipment |
The alarm is raised when an MPT has a temporary communication failure. |
|
DialogFailure |
value=1163 |
package=mpr |
The alarm is raised when an MPT has a temporary communication failure. |
|
DyingGasp |
value=1164 |
package=netw |
The alarm is raised when the node has loss of power. |
|
DyingGasp |
value=1164 |
package=equipment |
The alarm is raised when a Dying Gasp trap is received to indicate a power failure. |
|
HouseKeeping |
value=1165 |
package=mpr |
Defect detected by an house-keeping interface on AUX card. |
|
HouseKeeping |
value=1165 |
package=equipment |
The alarm is raised when a HouseKeeping trap is received. |
|
IncompatibleCapacity |
value=1166 |
package=equipment |
The alarm is raised when there is a radio capacity incompatibility. |
|
IncompatibleChannelSpacing |
value=1167 |
package=equipment |
The alarm is raised when a incompatibility of channel spacing value defect raise. |
|
IncompatibleChannelSpacing |
value=1167 |
package=radioequipment |
The alarm is raised when a incompatibility of channel spacing value defect raise. |
|
LossOfCESoEthFrames |
value=1168 |
package=equipment |
The alarm is raised when an Ethernet frame loss is detected on a CES. |
|
LossOfProtection |
value=1169 |
package=equipment |
The alarm is raised when an MPT radio protection loss occurs. |
|
MPTPowerSupplyFailure |
value=1170 |
package=equipment |
The alarm is raised when an MPT radio power source has a power supply failure. |
|
ModFail |
value=1171 |
package=equipment |
The alarm is raised when a modulation failure is detected. |
|
ModLOS |
value=1172 |
package=equipment |
The alarm is raised when a modulation loss of signal is detected. |
|
RemoteNEFailure |
value=1173 |
package=equipment |
The alarm is raised when a remote NE failure is detected. |
|
StandbyVersionMismatch |
value=1174 |
package=mpr |
The alarm is raised when a standby device software version mismatch is detected. |
|
StandbyVersionMismatch |
value=1174 |
package=equipment |
The alarm is raised when a standby device software version mismatch is detected. |
|
TxFail |
value=1175 |
package=equipment |
The alarm is raised when a transmission failure is detected. |
|
UnderlyingResourceDegrade |
value=1176 |
package=equipment |
The alarm is raised when degradation of an underlying radio interface resource is detected. |
|
UnderlyingResourceUnavailableService |
value=1177 |
package=equipment |
The alarm is raised when an underlying E1, radio, or Ethernet interface resource service is unavailable. |
|
OPticalAmplifierModuleCaseTemperatureHigh |
value=1180 |
package=ethernetequipment |
The alarm is raised when a device reports an Amplifier Module Case Temperature High on an optical amplifier interface. |
|
OPticalAmplifierModuleCaseTemperatureLow |
value=1181 |
package=ethernetequipment |
The alarm is raised when a device reports an Amplifier Module Case Temperature Low on an optical amplifier interface. |
|
OPticalAmplifierPumpTemperature |
value=1182 |
package=ethernetequipment |
The alarm is raised when a device reports an Amplifier Pump Temperature on an optical amplifier interface. |
|
OPticalTdcmModuleTemperatureHigh |
value=1183 |
package=ethernetequipment |
The alarm is raised when a device reports a Tdcm Module Temperature High on a tunable dispersion compensation module's interface. |
|
OPticalTdcmModuleTemperatureLow |
value=1184 |
package=ethernetequipment |
The alarm is raised when a device reports a Tdcm Module Temperature Low on a tunable dispersion compensation module's interface. |
|
OpticalAmplifierLossOfInputOpticalPower |
value=1185 |
package=ethernetequipment |
The alarm is raised when a device reports an Amplifier Loss of input optical power on an optical amplifier interface. |
|
OpticalAmplifierLossOfOutputPower |
value=1186 |
package=ethernetequipment |
The alarm is raised when a device reports an Amplifier Loss of output power on an optical amplifier interface. |
|
OpticalAmplifierModuleCommunicationFailure |
value=1187 |
package=ethernetequipment |
The alarm is raised when a device reports an Amplifier Module Communication Failure on a tunable dispersion compensation module's interface. |
|
OpticalAmplifierPumpCurrent |
value=1188 |
package=ethernetequipment |
The alarm is raised when a device reports an Amplifier Pump over current on an optical amplifier interface. |
|
OpticalTdcmEEPROMinvalid |
value=1189 |
package=ethernetequipment |
The alarm is raised when a device reports a Tdcm EEPROM invalid on a tunable dispersion compensation module's interface. |
|
OpticalTdcmModuleCommunicationFailure |
value=1190 |
package=ethernetequipment |
The alarm is raised when a device reports a Tdcm Module Communication Failure on a tunable dispersion compensation module's interface. |
|
OpticalTdcmNotReady |
value=1191 |
package=ethernetequipment |
The alarm is raised when a device reports a Tdcm Not Ready on a tunable dispersion compensation module's interface. |
|
OpticalTdcmThermalControlTemperatureLimit |
value=1192 |
package=ethernetequipment |
The alarm is raised when a device reports a Tdcm Thermal Control Temperature Limit on a tunable dispersion compensation module's interface. |
|
OpticalTdcmThermalControlUnlocked |
value=1193 |
package=ethernetequipment |
The alarm is raised when a device reports a Tdcm Thermal Control Unlocked on a tunable dispersion compensation module's interface. |
|
DualEndedLossNotSupported |
value=1194 |
package=ethernetoam |
The alarm is raised when a MEP that does not support Y1731 Dual Ended Loss test is participating in a CFM Continuity Check test that has Y1731 Dual Ended Loss test enabled. |
|
DualEndedLossThresholdAlarm |
value=1195 |
package=ethernetoam |
The alarm is raised when a MEP reports that either the Local or Remote loss ratio has exceeded the configured threshold for the specified remote MEP. |
|
apsPrvsnAlarm |
value=1196 |
package=ethring |
The alarm is raised when a mismatch is detected on Ethernet Ring provisioning. The mismatch occurs when the RPL Owner Node receives one or more No Request R-APS message(s) with an RPL blocked status flag set (NR, RB) and a different Node ID. |
|
HighLevelRoutesReached |
value=1197 |
package=l3fwd |
The alarm is raised when the number of routes in a VPRN exceeds the high threshold value. The high threshold value is a percentage of the maximum number of routes specified in the VPRN configuration. The percentage is derived by adding 100 to the threshold value in the VPRN configuration and dividing the result by 2. The alarm information includes the number of routes and this calculated high threshold value. |
|
MaxNumRoutesReached |
value=1198 |
package=l3fwd |
The alarm is raised when the number of routes in a VPRN reaches the maximum number of routes specified in the VPRN configuration. The alarm information includes the number of routes, the specified maximum, and the route type, which is either IPv4 or IPv6. |
|
MidLevelRoutesReached |
value=1199 |
package=l3fwd |
The alarm is raised when the number of routes in a VPRN exceeds the threshold specified in the VPRN configuration. The threshold value is a percentage of the maximum number of routes specified in the VPRN configuration. The alarm information includes the number of routes and the threshold value. |
|
BidirLspMonitorPathsDiverge |
value=1915 |
package=monpath |
The alarm is raised when the LSP's active path's hops do not match in the forward and reverse direction. |
|
IpPathDown |
value=1916 |
package=monpath |
This alarm is raised when the re-calculation by the CPAA shows that no IP Path is available. |
|
IpPathMulticastWarning |
value=1917 |
package=monpath |
If IP Path is enabled for monitoring Multicast, the alarm is raised when at least one IP Path segment is not Multicast enabled. The alarm is cleared when all the segments are Multicast enabled. |
|
TestThresholdExceededAlarm2 |
value=1918 |
package=mpls |
The alarm is raised when an OAM test on the object reports that the test threshold has been exceeded. |
|
TestThresholdExceededAlarm2 |
value=1918 |
package=service |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm2 |
value=1918 |
package=svt |
The alarm is raised when an OAM test on the object reports that the test threshold has been exceeded. |
|
TestThresholdExceededAlarm2 |
value=1918 |
package=pim |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm2 |
value=1918 |
package=ethernetoam |
The alarm is raised when an OAM test on the object reports that the test threshold has been exceeded. |
|
TestThresholdExceededAlarm2 |
value=1918 |
package=atm |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm2 |
value=1918 |
package=rtr |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm3 |
value=1919 |
package=mpls |
The alarm is raised when an OAM test on the object reports that a test threshold is exceeded. |
|
TestThresholdExceededAlarm3 |
value=1919 |
package=rtr |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm3 |
value=1919 |
package=service |
The alarm is raised when SasThresholdExceededAlarm is raised for any test on this object. |
|
TestThresholdExceededAlarm3 |
value=1919 |
package=svt |
The alarm is raised when an OAM test on the object reports that the test threshold has been exceeded. |
|
TMNLossofSignal |
value=1920 |
package=mpr |
The alarm is raised when a Loss of Signal occurs on the TMN Interface. |
|
TMNLossofSignal |
value=1920 |
package=netw |
The alarm is raised when a Loss of Signal occurs on the TMN Interface. |
|
CorruptedUdpPacket |
value=1921 |
package=netw |
The alarm is raised when an UDP packet for an application is corrupted. |
|
UnidentifiedNode |
value=1922 |
package=netw |
The alarm is raised when the node being discovered can not be properly identified. |
|
OspfExportLimitDropped |
value=1924 |
package=ospf |
The alarm is raised when the total number of exported routes to the OSPF level, drops below the configured limit. |
|
OspfExportLimitReached |
value=1925 |
package=ospf |
The alarm is raised when the total number of routes to the OSPF level is equal to the configured limit for exported routes. |
|
OspfExportLimitWarning |
value=1926 |
package=ospf |
The alarm is raised when the total number of exported routes to the OSPF level is equal to the configured percentage, vRtrIsisExportLimitLogPercent of the export limit. |
|
RipExportLimitDropped |
value=1927 |
package=rip |
The alarm is raised when the total number of exported routes from the route table to this RIP level drops below the configured export limit |
|
RipExportLimitReached |
value=1928 |
package=rip |
The alarm is raised when the total number of routes for the level is equal to the configured limit for exported routes |
|
RipExportLimitWarning |
value=1929 |
package=rip |
The alarm is raised when the number of exported routes for the RIP level equals the percentage of the export limit configured in the Export Limit Log Percent parameter. |
|
LicenseViolation |
value=1930 |
package=security |
The alarm is raised when a license violation has occurred. Alarms raised against licensed products, due to the licensed product limit being zero at the time of node discovery, will be implicitly cleared if a new license that sets the licensed product limit to not zero is imported. |
|
LicensedLimitNearing |
value=1931 |
package=security |
The alarm is raised when the license items in the network reaches 75 to 90 percent of the license capacity. |
|
LicensedLimitNearlyExceeded |
value=1932 |
package=security |
The alarm is raised when the license items in the network reaches 90 to 100 percent of the license capacity. |
|
LicensedLimitReached |
value=1933 |
package=security |
The alarm is raised when the license items in the network reaches 100 percent of the license capacity. |
|
DiskSpaceBelowThreshold |
value=1934 |
package=server |
The alarm is raised when the disk space threshold is reached. |
|
DroppedUdpPackets |
value=1935 |
package=server |
The alarm is raised when the number of UDP Packets that await processing by the NFM-P surpasses the server's capacity to process them. |
|
MemoryThresholdCrossingAlarm |
value=1936 |
package=server |
The alarm is raised when the available memory on the NFM-P server drops below the warning threshold. |
|
PurgeFilesToFreeDiskSpace |
value=1937 |
package=server |
The alarm is raised when the NFM-P server deletes files in order to free disk space. |
|
RsyncDirectoryMismatch |
value=1938 |
package=server |
The alarm is raised when the rsync directories on two NFM-P servers do not match. |
|
RsyncFilesToRemoteHost |
value=1939 |
package=server |
The alarm is raised when a rsync operation cannot synchronize files with the remote server. |
|
WriteFileToDisk |
value=1940 |
package=server |
The alarm is raised when NFM-P cannot write a file to disk. |
|
BITS2NotQualified |
value=1941 |
package=sonet |
The alarm is raised when the BITS2 timing reference on an NE is not in the Qualified state. |
|
IncompleteConfiguration |
value=1942 |
package=netw |
The alarm is raised when a pre-provisioned NE has no objects configured beneath it. |
|
ManagementIpAddressMismatch |
value=1943 |
package=netw |
The alarm is raised when the IP address of the shadow network element does not match with the IP address of the discovered NE. |
|
NetworkElementChassisTypeMismatch |
value=1946 |
package=netw |
The alarm is raised when the chassis type of the shadow network element does not match with the chassis type of the discovered NE. |
|
NetworkElementTypeMismatch |
value=1947 |
package=netw |
The alarm is raised when the type of the shadow network element does not match with the type of the discovered NE. |
|
NetworkElementVersionMismatch |
value=1948 |
package=netw |
The alarm is raised when the version of the shadow network element does not match with the version of the discovered NE. |
|
ReconfigFailure |
value=1949 |
package=netw |
This alarm is raised when the reconfig action failed. |
|
BITSReferenceLossOfSignal |
value=1950 |
package=equipment |
The alarm is raised when the BITS Port reference on the Standby CPM is not qualified due to Loss of Signal. |
|
BITSReferenceLossOfSignal |
value=1950 |
package=sonet |
The alarm is raised when the BITS/BITS1 reference on an NE is not qualified due to Loss of Signal. |
|
BITSReferenceOutOfFrequency |
value=1951 |
package=equipment |
The alarm is raised when the BITS Port reference on the Standby CPM is not qualified due to Out of frequency. |
|
BITSReferenceOutOfFrequency |
value=1951 |
package=sonet |
The alarm is raised when the BITS/BITS1 Reference on an NE is not qualified due to Out of frequency. |
|
BITSReferenceOutOfPollInRange |
value=1952 |
package=equipment |
The alarm is raised when the BITS Port reference on the Standby CPM is not qualified due to Out of poll in range. |
|
BITSReferenceOutOfPollInRange |
value=1952 |
package=sonet |
The alarm is raised when the BITS/BITS1 Reference on an NE is not qualified state due to Out of poll in range. |
|
ReferenceOneLossOfSignal |
value=1953 |
package=sonet |
The alarm is raised when the Timing Reference One on an NE is not qualified due to Loss of Signal. |
|
ReferenceOneLossOfSignal |
value=1953 |
package=equipment |
The alarm is raised on the Standby CPM when the Timing Reference One on an NE is not qualified due to Loss of Signal. |
|
ReferenceOneOutOfFrequency |
value=1954 |
package=equipment |
The alarm is raised on the Standby CPM when the Timing Reference One on an NE is not qualified due to Out of frequency. |
|
ReferenceOneOutOfFrequency |
value=1954 |
package=sonet |
The alarm is raised when the Timing Reference One on an NE is not qualified due to Out of frequency. |
|
ReferenceOneOutOfPollInRange |
value=1955 |
package=sonet |
The alarm is raised when the Timing Reference One on an NE is not qualified due to Out of poll in range. |
|
ReferenceOneOutOfPollInRange |
value=1955 |
package=equipment |
The alarm is raised on the Standby CPM when the Timing Reference One on an NE is not qualified due to Out of poll in range. |
|
ReferenceTwoLossOfSignal |
value=1956 |
package=sonet |
The alarm is raised when the Timing Reference Two on an NE is not qualified due to Loss of Signal. |
|
ReferenceTwoLossOfSignal |
value=1956 |
package=equipment |
The alarm is raised on the Standby CPM when the Timing Reference Two on an NE is not qualified due to Loss of Signal. |
|
ReferenceTwoOutOfFrequency |
value=1957 |
package=sonet |
The alarm is raised when the Timing Reference Two on an NE is not qualified due to Out of frequency. |
|
ReferenceTwoOutOfFrequency |
value=1957 |
package=equipment |
The alarm is raised on the Standby CPM when the Timing Reference Two on an NE is not qualified due to Out of frequency. |
|
ReferenceTwoOutOfPollInRange |
value=1958 |
package=equipment |
The alarm is raised on the Standby CPM when the Timing Reference Two on an NE is not qualified due to Out of poll in range. |
|
ReferenceTwoOutOfPollInRange |
value=1958 |
package=sonet |
The alarm is raised when the Timing Reference Two on an NE is not qualified due to Out of poll in range. |
|
ProxyDown |
value=1959 |
package=db |
The alarm is raised when proxy server communication fails. |
|
NodeDatabaseCorruptionDetected |
value=1961 |
package=netw |
This alarm is raised when an error in the node causes the node to lose its configuration and come up in an inconsistent/incomplete state. To overcome this it might be necessary to reconfigure the node. |
|
ApsSwitchedToWork |
value=1977 |
package=vwm |
Automatic Protection Switch (APS) switched to working |
|
CardDegrade |
value=1987 |
package=equipment |
The alarm is raised when Card degrade - device is detected. |
|
CardInitializing |
value=1989 |
package=equipment |
The alarm is raised when Card initializing is detected. |
|
CardMissing |
value=1990 |
package=equipment |
The alarm is raised when Card missing is detected. |
|
DiagnosticTerminalLoopbackActive |
value=2001 |
package=equipment |
The alarm is raised when Diagnostic Terminal loopback active is detected. |
|
LocalFault |
value=2041 |
package=vwm |
Local Fault condition present raise notification. |
|
OpticalPowerReceivedOutOfRange |
value=2064 |
package=equipment |
The alarm is raised when Optical power received out of range is detected. |
|
OpticsModuleMismatch |
value=2065 |
package=equipment |
The alarm is raised when Pluggable Module mismatch is detected. |
|
PortFailure |
value=2070 |
package=equipment |
The alarm is raised when Pluggable Module SEEP failure is detected. |
|
SfpTempOOR |
value=2088 |
package=equipment |
The alarm is raised when SFP or XFP laser temperature out of range is detected. |
|
ThresholdCrossingAlarmCard |
value=2097 |
package=equipment |
The alarm is raised when a card value crosses a TCA threshold. |
|
ThresholdCrossingAlarmPort |
value=2098 |
package=equipment |
The alarm is raised when a port value crosses a TCA threshold. |
|
MissedStatsCatchUpCollection |
value=2895 |
package=netw |
The alarm is raised when a NFM-P main server cannot communicate with the node to retrieve missed collections intervals. It is cleared after NFM-P main server can retrieve missed collections intervals. |
|
SoftwareUpgradeFailure |
value=2899 |
package=netw |
The alarm is raised when Software upgrade failed is detected. |
|
PPPoESessionFailure |
value=2915 |
package=service |
The alarm is raised when an NE notifies the NFM-P that it cannot create a PPPoE Session. |
|
NodeDatabaseFallbackDetected |
value=2923 |
package=netw |
The alarm is raised when a configuration fallback is detected on the node and comes back up with a previous configuration. To correct this situation it might be necessary to reconfigure the node, or perform full resync its database with the 'fallback' configuration returned by the node. |
|
NodeDatabaseMisalignmentDetected |
value=2924 |
package=netw |
The alarm is raised when a configuration misalignment has been detected on the node and comes back up with an unexpected configuration (configuration change triggered by external tool) To correct this situation it might be necessary to reconfigure the node with the NFM-P's old configuration or accept the new configuration received from the node. |
|
CpmProtectionExceedEntry |
value=2925 |
package=sitesec |
The alarm is raised when a MAC packet stream has exceeded its per-source limit. |
|
CpmProtectionViolationIfEntry |
value=2926 |
package=sitesec |
The alarm is raised when the link-specific packet arrival rate limit at the interface is violated. |
|
CpmProtectionViolationPortEntry |
value=2927 |
package=sitesec |
The alarm is raised when the link-specific packet arrival rate limit at the port is violated. |
|
CpmProtectionViolationSAPEntry |
value=2928 |
package=sitesec |
The alarm is raised when the link-specific packet arrival rate limit at the SAP is violated. |
|
PeerLacIngressEgressFault |
value=2929 |
package=svt |
The alarm is raised when the Peer Status is Peer LAC Rx Fault and Peer LAC Tx Fault |
|
AaPolicerResourcesExceeded |
value=2930 |
package=aapolicy |
The alarm is raised when Application Assurance configured override values exceed policer resources. |
|
GlobalAppProfileCreated |
value=2931 |
package=aapolicy |
The alarm is raised when a global application profile to which a global transit IP policy is referenced does not exist. The alarm notifies the user that a global application profile has been created. |
|
FlowRouteInvalid |
value=2932 |
package=bgp |
The alarm is raised when the received BGP flow route is invalid. The BGP peer dose not create ip filter entry for the received flow route. |
|
FlowspecUnsupportdComAction |
value=2933 |
package=bgp |
The alarm is raised when the best route for a FlowSpec NLRI is received from a remote BGP peer with an extended community action that is unsupported. |
|
MD5AuthFailure |
value=2934 |
package=bgp |
The alarm is raised when an incoming packet is dropped because of BGP MD5 key authentication failure. |
|
ArchiveLogDiskSpaceSizeMisMatch |
value=2935 |
package=db |
The alarm is raised when the primary and standby database archived log directory sizes do not match. |
|
StandbyArchiveLogDiskSpaceBelowThreshold |
value=2936 |
package=db |
The alarm is raised when the standby database archived log disk space threshold specified in the nms-server.xml file is reached. |
|
ServerLeaseDefaultTimers |
value=2937 |
package=dhcp |
The alarm is raised when the system has reverted to default lease timer values for a particular DHCP client because the configuration of the lease timers was inconsistent. |
|
ServerMsgTooLong |
value=2938 |
package=dhcp |
The alarm is raised when a DHCP message is generated but the message size exceeds either the maximum DHCP message size, or the size provided by the client in the option maximum DHCP message size. |
|
LossOfESMC |
value=2939 |
package=equipment |
The alarm is raised when a loss of ESMC signal failure is detected. |
|
McPathBlackHole |
value=2940 |
package=equipment |
The alarm is raised when a multicast (S,G) specification enters a black-hole state. As of 11.0 R1, this alarm will no longer be raised. Instead, the McPathsBlackHole alarm will be raised. All existing McPathBlackHole alarms will be converted to the McPathsBlackHole on upgrade. |
|
RemoteDefectIndication |
value=2942 |
package=equipment |
The alarm is raised when a RDI occurs. |
|
RemoteDefectIndication |
value=2942 |
package=radioequipment |
The alarm is raised when a RDI occurs. |
|
SectionTraceMismatch |
value=2943 |
package=equipment |
The alarm is raised when a trace mismatch is detected on a SONET section. |
|
SynchronizationSignalFailure |
value=2944 |
package=equipment |
The alarm is raised when a synchronization signal failure is detected. |
|
MepAISReceivedAlarm |
value=2945 |
package=ethernetoam |
The alarm is raised when a MEP receives AIS test frames from one or more of its sub-layer MEPs. |
|
multipleRPLOwner |
value=2946 |
package=ethring |
The alarm is raised on RPL elements configured as RPL owners, when there are multiple RPL owners detected in the ring topology. |
|
EMSystemUnreachable |
value=2947 |
package=hip |
The alarm is raised when the NFM-P detects a HIP communication link failure to the EM System while the EM System is administratively up. The alarm clears when the HIP link returns to service or the EM System is no longer administratively up. |
|
IsaAaGrpBitRate |
value=2948 |
package=isa |
The alarm is raised when the current bit rate on the MDA in the ISA-AA group is greater than or equal to tmnxBsxBitRateHighWatermark, and the prior bit rate is less than the threshold. |
|
IsaAaGrpFlowSetup |
value=2949 |
package=isa |
The alarm is raised when the current flow setup rate on the MDA in the ISA-AA group is greater than or equal to tmnxBsxFlowSetupHighWatermark, and the prior bit rate is less than the threshold. |
|
IsaAaGrpFmSbWaSBufOvld |
value=2950 |
package=isa |
The alarm is raised when the current weighted average shared buffer for an ISA in the from subscriber direction is greater than or equal to a high water mark in a normal, non-overloaded, state. |
|
IsaAaGrpOvrldCutthru |
value=2951 |
package=isa |
The alarm is raised when cut through processing starts on an ISA MDA. |
|
IsaAaGrpPacketRate |
value=2952 |
package=isa |
The alarm is raised when the current packet rate on the MDA in the ISA-AA group is greater than or equal to tmnxBsxPacketRateHighWatermark, and the prior rate is less than this threshold. |
|
IsaAaGrpToSbWaSBufOvld |
value=2953 |
package=isa |
The alarm is raised when the current weighted average shared buffer use for an ISA in the To subscriber direction, is greater than or equal to a high water mark, after being in a normal or non-overloaded state. |
|
LdpSessionNonexistent |
value=2954 |
package=ldp |
The alarm is raised when an LDP session is non-existent. |
|
liSourceFilterChanged |
value=3313 |
package=mirrorli |
The alarm is raised when a parameter of a filter which is referenced by Lawful Intercept (LI), or a parameter of one of its entry is changed. This notification may be triggered only if the LI filter lock is overruled, and one of the following actions occurs:
-
filter referenced by LI has been deleted.
-
ne of the parameters (default-action, scope) of a filter which is referenced by LI has been changed.
-
filter which is referenced by LI is overwritten.
-
new entry is created for a filter which is referenced by LI.
-
n entry of a filter which is referenced by LI is activated.
-
n entry is removed from a filter which is referenced by LI.
-
n entry of a filter which is referenced by LI is renumbered.
-
ne of the parameters of an entry in a filter which is referenced by LI is changed.
|
|
DeployerObjectsLimitExceeded |
value=3314 |
package=netw |
The alarm is raised when the number of deployed objects or attributes exceeds the NFM-P system limit. |
|
NodeDataMismatch |
value=3315 |
package=netw |
The alarm is raised when the NFM-P Data model and node is mismatched. |
|
ServerMaxLeasesReached |
value=3316 |
package=netw |
The alarm is raised when the maximum number of leases allocated by local DHCP server is reached. |
|
BgpFlowspecNlriProblem |
value=3317 |
package=rtr |
The alarm is raised when the filter module receives a BGP FlowSpec NLRI that cannot be treated. |
|
IpAddressOverlap |
value=3318 |
package=rtr |
The alarm is raised when the IP addresses configured on different VPRN sites within service overlap. |
|
TwampSrvInactivityTimeout |
value=3319 |
package=sas |
The alarm is raised when a TWAMP control connection is disconnected by the TWAMP server due to the connection being inactive for a period exceeding the server's inactivity timeout, which generates a TWAMP Server InactivityTimeout notification. |
|
TwampSrvMaxConnsExceeded |
value=3320 |
package=sas |
The alarm is raised when the maximum number of concurrent TWAMP control connections for the server has been reached. [EFFECT] The TWAMP client cannot request test runs on the rejected connection. [RECOVERY] Configure the system-level maximum number of concurrent TWAMP control connections to a larger value, or disconnect any TWAMP control connection.' |
|
TwampSrvMaxSessExceeded |
value=3321 |
package=sas |
The alarm is raised when the maximum number of concurrent TWAMP sessions for the server has been reached. [EFFECT] The TWAMP client cannot request test runs on the rejected session. [RECOVERY] Configure the system-level maximum number of concurrent TWAMP sessions to a larger value, or disconnect any TWAMP session.' |
|
TwampSrvPfxMaxConnsExceeded |
value=3322 |
package=sas |
The alarm is raised when the maximum number of concurrent TWAMP control connections for a TWAMP client prefix has been reached. [EFFECT] The TWAMP client cannot request test runs on the rejected connection. [RECOVERY] Configure the prefix's maximum number of concurrent TWAMP control connections to a larger value, or disconnect a TWAMP control connection which uses the prefix. |
|
TwampSrvPfxMaxSessExceeded |
value=3323 |
package=sas |
The alarm is raised when the maximum number of concurrent TWAMP sessions for a TWAMP client prefix has been reached. [EFFECT] The TWAMP client cannot request test runs on the rejected session. [RECOVERY] Configure the prefix's maximum number of concurrent TWAMP sessions to a larger value, or disconnect a TWAMP session which uses the prefix.' |
|
IPsecInterfaceBfdSessionDown |
value=3324 |
package=service |
The alarm is raised when a BFD session is operationally down. |
|
IPsecInterfaceBfdSessionMissing |
value=3325 |
package=service |
The alarm is raised when a previously present BFD session is absent. |
|
GRETunnelDown |
value=3326 |
package=svt |
The alarm is raised when the IP/GRE tunnel Operational State changes to Down and the Administrative State is Up. |
|
HashLabelSignalCapabilityMismatch |
value=3327 |
package=svt |
The alarm is raised when an SDP binding hash label signal capability is enabled and the return SDP binding hash label signal capability is disabled or not supported. If this misconfiguration causes the mismatch of the operational hash label on both sides, the receiving site will drop the data packets as a result. This alarm is cleared when the hash label signal capability is either enabled or disabled on both sides. |
|
CorruptedBgpUpdate |
value=3328 |
package=topology |
The alarm is raised when a BGP-bad-update-packet-received message is sent from the CPAA against a BGP AS. The alarm is not auto-cleared by CPAM. |
|
BfdInterfaceConnectionBroken |
value=3329 |
package=vrrp |
The alarm is raised when the BFD connection to a peer times out. |
|
BfdInterfaceConnectionDown |
value=3330 |
package=vrrp |
The alarm is raised when the Operational State of a BFD session is Not Connected. |
|
BfdInterfaceConnectionPeerDetectsDown |
value=3331 |
package=vrrp |
The alarm is raised when a BFD peer detects a connection timeout. |
|
BoardEqpt |
value=3338 |
package=equipment |
The alarm is raised when Card failure - boot failure is detected. |
|
EqptDgrOch |
value=3349 |
package=equipment |
The alarm is raised when Port degrade - wavelength tracker communication failure is detected. |
|
IntTempLow |
value=3361 |
package=equipment |
The alarm is raised when Card under temperature is detected. |
|
IntTempLow |
value=3361 |
package=vwm |
Int Temp Low |
|
OpticsModuleUnknown |
value=3386 |
package=equipment |
The alarm is raised when Pluggable Module unknown is detected. |
|
ReplUnitMissMOD |
value=3392 |
package=equipment |
The alarm is raised when Pluggable Module missing is detected. |
|
TCvPcs15Min |
value=3416 |
package=equipment |
The alarm is raised when Indicates a CV-PCS Threshold Crossing detection is detected. |
|
TCvPcs1Day |
value=3417 |
package=equipment |
The alarm is raised when Indicates a CV-PCS Threshold Crossing detection is detected. |
|
TEsPcs15Min |
value=3436 |
package=equipment |
The alarm is raised when Indicates a ES-PCS Threshold Crossing detection is detected. |
|
TEsPcs1Day |
value=3437 |
package=equipment |
The alarm is raised when Indicates a ES-PCS Threshold Crossing detection is detected. |
|
TSefsPcs15Min |
value=3498 |
package=equipment |
The alarm is raised when Indicates a SEFS-PCS Threshold Crossing detection is detected. |
|
TSefsPcs1Day |
value=3499 |
package=equipment |
The alarm is raised when Indicates a SEFS-PCS Threshold Crossing detection is detected. |
|
TSesPcs15Min |
value=3518 |
package=equipment |
The alarm is raised when Indicates a SES-PCS Threshold Crossing detection is detected. |
|
TSesPcs1Day |
value=3519 |
package=equipment |
The alarm is raised when Indicates a SES-PCS Threshold Crossing detection is detected. |
|
EthernetPortDuplicateLane |
value=3557 |
package=ethernetequipment |
The alarm is raised when a device reports a Duplicate Lane on an Ethernet port. |
|
EthernetPortNoAmLock |
value=3558 |
package=ethernetequipment |
The alarm is raised when a device reports a No Am Lock on an Ethernet port. |
|
EthernetPortNoBlockLock |
value=3559 |
package=ethernetequipment |
The alarm is raised when a device reports a No Block Lock on an Ethernet port. |
|
PTPCardNotSupportedAlarm |
value=3603 |
package=ptp |
The alarm is raised when the Precision Timing Protocol (PTP) is enabled on a card that does not support clock recovery. |
|
PTPClockNoMasterAlarm |
value=3604 |
package=ptp |
The alarm is raised when Precision Timing Protocol (PTP) clock does not support PTP timing master. |
|
PTPClockRecoveryStateAlarm |
value=3605 |
package=ptp |
The alarm is raised when the aluPtpClockRecoveryState changes for an IEEE 1588 Precision Timing Protocol (PTP) clock. |
|
PTPMasterChangeAlarm |
value=3606 |
package=ptp |
The alarm is raised when there is a change in the synchronization source for a Precision Timing Protocol (PTP) clock. |
|
PTPOutOfResourcesAlarm |
value=3607 |
package=ptp |
The alarm is raised when the Precision Timing Protocol (PTP) process on the card is out of resources. This may occur in either of two situations: 1. The number of PTP peers exceeds the system limit. 2. The total unicast packet rate negotiated with all PTP peers reaches the maximum packet rate supported by the system. |
|
PTPPeerLossOfAnnounce |
value=3608 |
package=ptp |
The alarm is raised when the PTP peer is in the 'Packet Timing Signal Fail (Loss Announce)' state. This indicates that the PTP announce messages are not received from the remote master. |
|
PTPPeerLossOfSync |
value=3609 |
package=ptp |
The alarm is raised when the PTP peer is in the 'Packet Timing Signal Fail (Loss Sync)' state. This indicates that the PTP timing messages are not received from the remote master. |
|
PTPPortDSPortStateAlarm |
value=3610 |
package=ptp |
The alarm is raised when the aluPtpPortDSPortState changes for an IEEE 1588 Precision Timing Protocol (PTP) port. |
|
PTPNotQualified |
value=3611 |
package=sonet |
The alarm is raised when PTP on an NE is not in the Qualified state. |
|
PTPQualityLevelChangedAlarm |
value=3612 |
package=sonet |
The alarm is raised when there is a change of the received quality level on the Precision Timing Protocol (PTP). |
|
PTPReferenceLossOfSignal |
value=3613 |
package=sonet |
The alarm is raised when the PTP reference on an NE is not qualified due to Loss of Signal. |
|
PTPReferenceLossOfSignal |
value=3613 |
package=equipment |
The alarm is raised on the Standby CPM when the PTP reference on an NE is not qualified due to Loss of Signal. |
|
PTPReferenceOutOfFrequency |
value=3614 |
package=equipment |
The alarm is raised on the Standby CPM when the PTP Reference on an NE is not qualified due to Out of frequency. |
|
PTPReferenceOutOfFrequency |
value=3614 |
package=sonet |
The alarm is raised when the PTP Reference on an NE is not qualified due to Out of frequency. |
|
PTPReferenceOutOfPollInRange |
value=3615 |
package=equipment |
The alarm is raised on the Standby CPM when the PTP Reference on an NE is not qualified state due to Out of poll in range. |
|
PTPReferenceOutOfPollInRange |
value=3615 |
package=sonet |
The alarm is raised when the PTP Reference on an NE is not qualified state due to Out of poll in range. |
|
SdpEgressIfsNetDomainInConsistent |
value=3616 |
package=svt |
The alarm is raised when the SDP egress interface's consistency state changes to inconsistent. |
|
MCLagFailure |
value=3617 |
package=multichassis |
The alarm is raised when the NFM-P detects a MC-LAG failure on both MC-LAG members. |
|
MCLagSwitchOver |
value=3618 |
package=multichassis |
The alarm is raised when the NFM-P detects a MC-lag switchover. |
|
MCRedundancyLinkFailure |
value=3619 |
package=multichassis |
The alarm is raised when the NFM-P detects a physical link failure for a given port associated to a lag. |
|
MultipleLagPortsFailed |
value=3620 |
package=lag |
The alarm is raised when multiple Ports that are part of a lag are down. |
|
CommonLOS |
value=3621 |
package=equipment |
The alarm is raised when a radio interface CLA detects a loss of signal. |
|
DemXpicLOS |
value=3622 |
package=equipment |
The alarm is raised when a loss of signal occurs during XPIC demodulation. |
|
DemXpicLOS |
value=3622 |
package=mpr |
The alarm is raised when a loss of signal occurs during XPIC demodulation. |
|
LossOfPointer |
value=3623 |
package=equipment |
The alarm is raised when a loss of pointer occurs |
|
SecondaryBatteryFail |
value=3624 |
package=equipment |
The alarm is raised when a secondary battery failure is detected. |
|
SecondaryBatteryFail |
value=3624 |
package=mpr |
The alarm is raised when a secondary battery failure is detected. |
|
SignalLabelMismatch |
value=3625 |
package=equipment |
The alarm is raised when a signal label mismatch is detected. |
|
ThresholdCrossingMDAResvCBSAlarm |
value=3626 |
package=equipment |
The alarm is raised when the reserved CBS of an MDA crosses a threshold. |
|
ThresholdCrossingPortResvCBSAlarm |
value=3627 |
package=equipment |
The alarm is raised when the reserved CBS of a port crosses a threshold. |
|
vPortHostMatchFailure |
value=3628 |
package=equipment |
The alarm is raised when a host match lookup fails to resolve the egress virtual port. |
|
EthernetPortCrcFailure |
value=3629 |
package=ethernetequipment |
The alarm is raised when an Ethernet port CRC alarm condition is detected (Signal Degradation Threshold or Signal Failure Threshold exceeded). |
|
EthernetPortInternalAlarm |
value=3630 |
package=ethernetequipment |
The alarm is raised when an Ethernet port experiences excessive internal MAC tx errors. It is generated only when downOnInternalError is enabled on the port. |
|
RedundantMepMisconfiguration |
value=3631 |
package=ethernetoam |
The alarm is raised when an Active and Redundant MEP do not have the same ID, Operational MAC Address or Sub Group configured. |
|
RedundantMepMissing |
value=3632 |
package=ethernetoam |
The alarm is raised when a MEP misses a redundant counterpart on LAG or SAP. |
|
GneMTIEAlarm |
value=3633 |
package=genericne |
This user-definable alarm is raised against a generic NE when the NFM-P receives a trap from the generic NE that is mapped to the alarm in a generic NE alarm catalogue. The alarm mapping defines the Probable cause, Severity, and Implicitly cleared values, and optionally contains an extension that is appended to the Name value. |
|
GneMTIEAlarm |
value=3633 |
package=netw |
This user-definable alarm is raised against a generic NE when the NFM-P receives a trap from the generic NE that is mapped to the alarm in a generic NE alarm catalogue. The alarm mapping defines the Probable cause, Severity, and Implicitly cleared values, and optionally contains an extension that is appended to the Name value. |
|
AlarmQueueOverflowed |
value=3683 |
package=netw |
The alarm is raised when the alarm queue size exceeds the allowed maximum. When this happens, the NFM-P discards alarms. |
|
ConfigurationRollBackStatus |
value=3684 |
package=netw |
The alarm is raised when a configuration rollback operation is performed. |
|
ConfigurationRollBackStatus |
value=3684 |
package=rollback |
The alarm is raised when a configuration rollback operation is performed. |
|
subHostInconsistentAtmTdOvr |
value=3685 |
package=ressubscr |
The alarm is raised when an AAA server (e.g. a RADIUS server) specifies an ATM Traffic Descriptor override for a subscriber host while it has already specified another one for another host on the same ATM Virtual Circuit. |
|
MaxExecutingScripts |
value=3686 |
package=script |
The alarm is raised when the maximum number of scripts allowed to execute concurrently is exceeded. |
|
TCAAlarmLimitReached |
value=3687 |
package=server |
The alarm is raised when a TCA execute server reaches the limit of alarms for an interval. |
|
PPPoASessionFailure |
value=3688 |
package=service |
The alarm is raised when an NE notifies the NFM-P that it cannot create a PPPoA Session. |
|
PppNcpFailure |
value=3689 |
package=service |
The alarm is raised when there is an NCP phase setup problem. |
|
macMoveRateExceeded |
value=3690 |
package=service |
The alarm is raised when the SAP exceeds the MAC Move Frequency of the service site. |
|
macMoveRateExceeded |
value=3690 |
package=svt |
The alarm is raised when the SDP exceeds the Service Site's MAC Move Frequency. |
|
MsPwFecMisConfig |
value=3691 |
package=svt |
The alarm is raised when a misconfiguration is discovered between two signaling multi-segment pseudowires. For example, configuring both multi-segment pseudowires as master would cause this notification. |
|
RadiusOperStatusDown |
value=3692 |
package=netw |
The alarm is raised when all RADIUS servers have gone down. |
|
JMSServerMemoryLow |
value=3693 |
package=security |
The alarm is raised when available memory on the JMS server is low. |
|
MsPwFecRetryExpired |
value=3694 |
package=svt |
The alarm is raised when a trap is received because of retry expired. The alarm is cleared when the retry starts again. |
|
PoolMinFreeExc |
value=3696 |
package=dhcp |
The alarm is raised when the actual number of free addresses in a pool falls below the desired minimum number specified in the address pool configuration. |
|
GponPortInBandAlarm |
value=3697 |
package=equipment |
The alarm is raised when in-band signaling between the ONT and SAR for GPON statistics collection is not established after 30 seconds of GPON port uptime. |
|
GponPortInBandAlarmClear |
value=3698 |
package=equipment |
The alarm is raised when in-band signaling between the ONT and SAR for GPON statistics collection is established. |
|
RootDirMaxFilesReached |
value=3699 |
package=equipment |
The alarm is raised when the number of files in the root directory reaches the maximum. |
|
NoRPLOwner |
value=3700 |
package=ethring |
The alarm is raised when there is No RPL Owner selected on a Radio Ring. |
|
CliLoginMaxAttempts |
value=3701 |
package=netw |
The alarm is raised when the number of CLI login failures due to an incorrect user name or password using TELNET session exceeds the configured value. |
|
SSHLoginMaxAttempts |
value=3702 |
package=netw |
The alarm is raised when the number of CLI login failures due to incorrect user name or password using SSH session exceeds the configured value. |
|
BgpEventDbSizeThresholdExceeded |
value=3703 |
package=topology |
The alarm is raised when the actual DB size consumed by BGP Events exceeds the threshold. |
|
AarpDown |
value=3704 |
package=aapolicy |
The alarm is raised when the NFM-P detects that an AARP is operationally down. |
|
AarpStateChanged |
value=3705 |
package=aapolicy |
The alarm is raised when the NFM-P detects that an AARP state is changed. |
|
ObsoleteProtocolInFilter |
value=3706 |
package=aapolicy |
The alarm is raised when a local application filter refers to an obsolete application assurance protocol. |
|
ProbeFailedAlarm |
value=3707 |
package=atm |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm |
value=3707 |
package=service |
The alarm is raised when ProbeFailedAlarm is raised for any test on this object. |
|
ProbeFailedAlarm |
value=3707 |
package=mpls |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm |
value=3707 |
package=vpls |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm |
value=3707 |
package=bgp |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm |
value=3707 |
package=monpath |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm |
value=3707 |
package=ldp |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm |
value=3707 |
package=ethernetoam |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm |
value=3707 |
package=vprn |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm |
value=3707 |
package=vll |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm |
value=3707 |
package=mirror |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm |
value=3707 |
package=bier |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm |
value=3707 |
package=netw |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm |
value=3707 |
package=svt |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm |
value=3707 |
package=mplstp |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm |
value=3707 |
package=pim |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm |
value=3707 |
package=rtr |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
TestFailedAlarm |
value=3708 |
package=pim |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm |
value=3708 |
package=netw |
The alarm is raised when TestFailedAlarm is raised for any test on this object. |
|
TestFailedAlarm |
value=3708 |
package=bier |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm |
value=3708 |
package=bgp |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm |
value=3708 |
package=rtr |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm |
value=3708 |
package=mirror |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm |
value=3708 |
package=vprn |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm |
value=3708 |
package=ldp |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm |
value=3708 |
package=atm |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm |
value=3708 |
package=mpls |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm |
value=3708 |
package=mplstp |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm |
value=3708 |
package=service |
The alarm is raised when TestFailedAlarm is raised for any test on this object. |
|
TestFailedAlarm |
value=3708 |
package=vpls |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm |
value=3708 |
package=svt |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm |
value=3708 |
package=ethernetoam |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm |
value=3708 |
package=vll |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm |
value=3708 |
package=monpath |
The alarm is raised when an OAM test on the object fails. |
|
CardBoot |
value=3715 |
package=equipment |
The alarm is raised when Card booting is detected. |
|
EthCSF |
value=3721 |
package=ethernetoam |
The alarm is raised when a MEP receives a CCM frame with an interface status TLV of 'Down'. |
|
ProbeFailedAlarm2 |
value=3738 |
package=pim |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm2 |
value=3738 |
package=service |
The alarm is raised when ProbeFailedAlarm is raised for any test on this object. |
|
ProbeFailedAlarm2 |
value=3738 |
package=svt |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm2 |
value=3738 |
package=rtr |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm2 |
value=3738 |
package=mpls |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm2 |
value=3738 |
package=atm |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm2 |
value=3738 |
package=ethernetoam |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
TestFailedAlarm2 |
value=3739 |
package=atm |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm2 |
value=3739 |
package=ethernetoam |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm2 |
value=3739 |
package=svt |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm2 |
value=3739 |
package=rtr |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm2 |
value=3739 |
package=service |
The alarm is raised when TestFailedAlarm is raised for any test on this object. |
|
TestFailedAlarm2 |
value=3739 |
package=pim |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm2 |
value=3739 |
package=mpls |
The alarm is raised when an OAM test on the object fails. |
|
OlcStateChangeAlarm |
value=3740 |
package=generic |
The alarm is raised to notify the user, when an OLC State change takes place at the specified revert time. |
|
EMSystemAlarmOverLoad |
value=3741 |
package=hip |
The alarm is raised when the NFM-P detects an overload of EMS alarms in the alarm list. |
|
IgmpMaxSrcsLimitExceeded |
value=3742 |
package=igmp |
The alarm is raised when an attempt is made to configure an IGMP source for a group when the number of sources for this group is equal to 'maxSources', the maximum number of sources per group supported on the interface. |
|
PkiCertVerificationFailed |
value=3743 |
package=ipsec |
The alarm is raised when an attempt to verify the certificate fails. |
|
PkiFileReadFailed |
value=3744 |
package=ipsec |
The alarm is raised when an attempt to read the file fails. |
|
PkiFileReadFailed |
value=3744 |
package=sitesec |
The alarm is raised when an attempt to read the file fails. |
|
IPSecIsaGrpDown |
value=3745 |
package=isa |
The alarm is raised when the Operational State of an ISA IPSec group is Down and the Administrative State is Up. |
|
sdpBindReceivedProtSrcMac |
value=3746 |
package=l2fwd |
The alarm is raised when a restricted SDP receives a re-learn request for a protected MAC address. |
|
ProbeFailedAlarm3 |
value=3885 |
package=rtr |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm3 |
value=3885 |
package=service |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm3 |
value=3885 |
package=svt |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
ProbeFailedAlarm3 |
value=3885 |
package=mpls |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
TestFailedAlarm3 |
value=3886 |
package=mpls |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm3 |
value=3886 |
package=rtr |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm3 |
value=3886 |
package=svt |
The alarm is raised when an OAM test on the object fails. |
|
TestFailedAlarm3 |
value=3886 |
package=service |
The alarm is raised when an OAM test on the object fails. |
|
NatIsaGrpDown |
value=3887 |
package=nat |
The alarm is raised when the Operational State of an NAT ISA group is Down and the Administrative State is Up. |
|
WlanGwResrcProblemDetected |
value=3889 |
package=netw |
The alarm is raised when there is a resource problem detected while attempting to activate some part of the WLAN Gateway configuration of this system. |
|
svcMacFdbTabelFull |
value=3890 |
package=netw |
The alarm is raised when the system limit of FDB records is reached. |
|
ConfigurationRescueFileDeleteStatus |
value=3894 |
package=rollback |
The alarm is raised when a configuration rollback rescue file delete operation is performed. |
|
ConfigurationRescueFileSaveStatus |
value=3895 |
package=rollback |
The alarm is raised when a configuration rollback rescue save operation is performed. |
|
ConfigurationRescueStatus |
value=3896 |
package=rollback |
The alarm is raised when a configuration rollback rescue operation is performed. |
|
ConfigurationRollBackFileDeleteStatus |
value=3897 |
package=rollback |
The alarm is raised when a configuration rollback file delete operation is performed. |
|
ConfigurationRollBackFileSyncStatus |
value=3898 |
package=rollback |
The alarm is raised when a configuration rollback CPM sync operation is performed. |
|
ConfigurationRollBackSaveStatus |
value=3899 |
package=rollback |
The alarm is raised when a configuration rollback save operation is performed. |
|
BfdSessionFlapped |
value=3900 |
package=service |
The alarm is raised when a BFD session transitions from Up to Down and back to Up within the BFD operational state transition interval. |
|
BfdSessionFlapped |
value=3900 |
package=rtr |
The alarm is raised when a BFD session transitions from Up to Down and back to Up within the BFD operational state transition interval. |
|
BfdSessionFlapped |
value=3900 |
package=vprn |
The alarm is raised when a BFD session transitions from Up to Down and back to Up within the BFD operational state transition interval. |
|
L2tpLnsSePppSessionFailure |
value=3901 |
package=rtr |
The alarm is raised when an NE notifies the NFM-P that it cannot create a new L2TP session. |
|
ProbeFailureAlarm |
value=3902 |
package=sas |
This alarm is raised when a probe failure trap is received from the node. |
|
TestFailureAlarm |
value=3903 |
package=sas |
This alarm is raised when a test failure trap is received from the node. |
|
AarpInterfaceDown |
value=3904 |
package=service |
The alarm is raised when the NFM-P detects that an AARP interface is operationally down. |
|
IPsecInterfaceBfdSessionFlapped |
value=3905 |
package=service |
The alarm is raised when a BFD session transitions from Up to Down and back to Up within the BFD operational state transition interval. |
|
SubSlaacSetupFailure |
value=3906 |
package=service |
The alarm is raised when an NE notifies the NFM-P that it cannot create or update a SLAAC host in the tmnxSubSlaacTable. |
|
TMSInterfaceDown |
value=3907 |
package=service |
The alarm is raised when a TMS interface is operationally down. The alarm clears when the TMS interface is operationally up. |
|
sapDHCPLseStatePopulateErr |
value=3908 |
package=service |
The alarm is raised when an NE notifies the NFM-P that it cannot update the DHCP Lease State table upon reception of a DHCP ACK message. |
|
svcArpHostPopulateErr |
value=3909 |
package=service |
The alarm is raised when an NE notifies the NFM-P that it cannot update the ARP Host table upon reception of an ARP message. |
|
CAProfileStateChange |
value=3910 |
package=sitesec |
The alarm is raised when Certificate Authority profile changes state to 'down' due to tmnxSecNotifFailureReason. |
|
CpmProtectionExceedSapIpEntry |
value=3911 |
package=sitesec |
The alarm is raised when an IP packet stream has exceeded the per-source limit. |
|
SyncCertFailed |
value=3912 |
package=sitesec |
The alarm is raised when the synchronization of certificate files between the primary and secondary CPMs is stopped due to errors. |
|
radiusServerOverloaded |
value=3913 |
package=radiusaccounting |
The alarm is raised when the RADIUS server is overloaded. |
|
radiusServerOverloaded |
value=3913 |
package=subscrauth |
The alarm is raised when the RADIUS server is overloaded. |
|
WlanGwIsaGrpDown |
value=3914 |
package=wlangw |
The alarm is raised when the Operational State of an WLAN GW ISA group is Down and the Administrative State is Up. |
|
WlanGwTuQosProblem |
value=3915 |
package=wlangw |
The alarm is raised when a resource issue occurs while creating a WLAN Gateway tunnel QoS infrastructure instance. |
|
WppHostAuthenticationFailed |
value=3916 |
package=wpp |
The alarm is raised when a WPP host cannot be authenticated. |
|
LossOfMultiFrame |
value=3930 |
package=equipment |
This alarm is raised when a loss of multiple frames occurs on the SDH port. |
|
TxFailure |
value=3931 |
package=equipment |
The alarm is raised when a txFail (a fail of the Tx subfunction) defect raise. |
|
EPSAbnormalState |
value=3932 |
package=mpr |
The alarm is raised when abnormal state resulted due to force switch/lockout operation in EPS mode. |
|
RPSAbnormalState |
value=3934 |
package=mpr |
The alarm is raised when abnormal state resulted due to force switch/lockout operation in RPS mode. |
|
TPSAbnormalState |
value=3935 |
package=mpr |
The alarm is raised when abnormal state resulted due to force switch/lockout operation in TPS mode. |
|
NatIsaMemberSessionUsageHi |
value=3937 |
package=nat |
The alarm is raised when the session usage of an ISA-NAT group member reaches the high watermark. The alarm clears when the session usage reaches the low watermark. |
|
ActiveAbnormalCondition |
value=3938 |
package=netw |
The alarm is an indication for abnormal condition on NE. |
|
ATPCTimeout |
value=3939 |
package=equipment |
The alarm is raised when a the ATPC timeout defect raise. |
|
ATPCTimeout |
value=3939 |
package=radioequipment |
The alarm is raised when a the ATPC timeout defect raise. |
|
IncompatiblePower |
value=3940 |
package=radioequipment |
The alarm is raised when a incompatibility of the power value defect raise. |
|
IncompatiblePower |
value=3940 |
package=equipment |
The alarm is raised when a incompatibility of the power value defect raise. |
|
LocalRadioTxMuteAbnormalState |
value=3941 |
package=equipment |
The alarm is raised when abnormal state resulted due to local radio Tx is muted manually. |
|
LocalRadioTxMuteAbnormalState |
value=3941 |
package=radioequipment |
The alarm is raised when abnormal state resulted due to local radio Tx is muted manually. |
|
LoopbackActivateAbnormalState |
value=3942 |
package=equipment |
The alarm is raised when abnormal state resulted due to loopback activated. |
|
LoopbackActivateAbnormalState |
value=3942 |
package=radioequipment |
The alarm is raised when abnormal state resulted due to loopback activated. |
|
RadioLinkAMAbnormalState |
value=3943 |
package=radioequipment |
The alarm is raised when abnormal state resulted due to Radio link AM mode. |
|
RadioLinkAMAbnormalState |
value=3943 |
package=equipment |
The alarm is raised when abnormal state resulted due to Radio link AM mode. |
|
DataChannelAlarmIndicationSignal |
value=3944 |
package=tdmequipment |
The alarm is raised when an NE reports that a data channel has an AIS alarm condition. |
|
DataChannelLoopback |
value=3945 |
package=tdmequipment |
The alarm is raised when an NE reports that a data channel has a loopback alarm condition. |
|
DataChannelLossOfSignal |
value=3946 |
package=tdmequipment |
The alarm is raised when an NE reports that a date channel has an LOS condition. |
|
DataChannelRemoteAlarmIndication |
value=3947 |
package=tdmequipment |
The alarm is raised when an NE reports that a date channel has an RAI condition. |
|
AARadiusAcctPlcyFailure |
value=3948 |
package=aapolicy |
The alarm is raised when a RADIUS accounting request was not successfully sent to any of the RADIUS servers specified in the AA RADIUS accounting policy. The effect is accounting data for current subscribers will not be exported externally. Based on the noted reason, if necessary take action to ensure that the next RADIUS accounting will be successfully sent. |
|
AARadiusAcctServerStateChanged |
value=3949 |
package=aapolicy |
The notification alarm is raised when the operational status of an AA RADIUS Accounting Policy Server has transitioned from 'In Service' to 'Out of Service' or 'Unknown' and cleared when operational status transitioned to 'In Service'. |
|
PoolDepleted |
value=3950 |
package=dhcp |
This alarm is generated when the actual number of free addresses in the DHCP Server Address pool becomes zero. |
|
ServerDeclineStaticAddr |
value=3951 |
package=dhcp |
The tmnxDhcpSvrDeclineStaticAddr notification is generated when a DHCP decline message is received from a DHCP client that has a static IP address assigned. |
|
ServerUserDatabaseUnknown |
value=3952 |
package=dhcp |
The tmnxDhcpSvrUserDbUnknown notification is generated when the local DHCP server instance drops a DHCP message because a local user database with the name specified for this server instance could not be found. |
|
SubnetDepleted |
value=3953 |
package=dhcp |
This alarm is generated when the actual number of free addresses in the DHCP Server Subnet becomes zero. |
|
CKM |
value=3955 |
package=equipment |
The alarm is raised when Encryption Current Key Mismatch is detected. |
|
NKM |
value=3964 |
package=equipment |
The alarm is raised when Encryption Next Key Mismatch is detected. |
|
ReplicationLmtExceeded |
value=3968 |
package=equipment |
The alarm is raised when an IOM fails to program an OIF for an (S,G) record because the replication limit for that (S,G) on that IOM has been reached. The replication limit per (S,G) entry on an IOM is currently 127. |
|
IgmpGrpIfSapMaxGroupsLimitExceeded |
value=3979 |
package=igmp |
This alarm is raised when an IGMP host subscribes to a new multicast group that cannot be installed because the maximum number of active groups on the IGMP group interface SAP has already been reached. |
|
IgmpGrpIfSapMaxSourcesLimitExceeded |
value=3980 |
package=igmp |
This alarm is raised when an IGMP host subscribes to a multicast group with a source that cannot be installed because the maximum number of active sources on the IGMP group interface SAP has already been reached. |
|
LacpExpired |
value=3981 |
package=lag |
The alarm is raised when Lacp expired on subgroup lag member due to state change. |
|
LagDot1agStateChanged |
value=3982 |
package=lag |
The alarm is raised when the subgroup lag member dot1ag state has changed. |
|
LagEfmOamStateChanged |
value=3983 |
package=lag |
The alarm is raised when the subgroup lag member efmOam state has changed. |
|
LagPartnerOperStateChanged |
value=3984 |
package=lag |
The alarm is raised when the subgroup lag member partner oper state has changed. |
|
liSourceIP6FltrChangeReject |
value=4377 |
package=mirrorli |
The alarm is raised when an operator tries to modify an IPv6 filter or an IPv6 filter entry that is in use by LI. |
|
P2MPLSPDown |
value=4378 |
package=mpls |
The alarm is raised when the P2MP LSP Administrative State is Up and the Operational State is Down. The alarm clears when the P2MP LSP Operational State changes to Up or the Administrative State changes to Down. |
|
NatPcpSrvStateDown |
value=4382 |
package=nat |
The alarm is raised when the Operational State of an NAT PCP Server Changes |
|
MlpppBundleInterleavingDisabled |
value=4383 |
package=netw |
The alarm is raised when the 'Link Fragmentation and LFI' bit is set but LFI isn't active for MLPPP Bundle. It is cleared for other cases. If LFI is not desired, disable it in the L2TP MLPPP configuration of the related routing instance. Or, ensure that the MLPPP bundle only contains a single link. |
|
ScheduledPollerProblem |
value=4386 |
package=netw |
The alarm is raised when the NFM-P is unable to poll a network object, for example, because of intermittent or no IP connectivity to an NE, incorrect SNMP or Netconf security parameters, or disabled SNMP on the NE. |
|
SubHostLcktLimitReached |
value=4387 |
package=netw |
This alarm is raised when the system wide maximum number of lockout hosts is reached. |
|
IpAddressManaged |
value=4388 |
package=ptp |
The alarm is raised when unmanaged IP address becomes managed virtual router IP address. |
|
LicenseUpgradeFailed |
value=4389 |
package=nelicense |
The alarm is raised when an NE license upgrade using the NFM-P fails. |
|
CacheSyncCommunicationFailure |
value=4390 |
package=server |
The alarm is raised when the NFM-P standby server cannot establish a warm redundancy connection with the NFM-P primary server. |
|
SubHostLcktSapLimitReached |
value=4391 |
package=service |
This alarm is raised when the maximum number of lockout hosts on a given SAP is reached. |
|
SpbAdjacencyDown |
value=4392 |
package=spb |
The alarm is raised when an SPB IS-IS interface has no adjacencies, for example, because the IS-IS protocol on the remote site is down. |
|
SpbInterfaceDown |
value=4393 |
package=spb |
The alarm is raised when an SPB IS-IS interface has an Operational State other than Up. |
|
SpbNbrMultAdjExists |
value=4394 |
package=spb |
The alarm is sent when IS-IS SPB instance detects a neighbor to which it already has a direct adjacency on another interface. |
|
SpbRejectedAdjacency |
value=4395 |
package=spb |
The alarm is raised when the NFM-P receives a vRtrIsisRejectedAdjacency trap, which indicates that an adjacency cannot be established in response to a Hello PDU from an IS because of a lack of resources. |
|
SpbSiteDown |
value=4396 |
package=spb |
The alarm is raised when an SPB site has an Operational State other than Up. |
|
TooManyCpaaPerOspfv3Area |
value=4397 |
package=topology |
The alarm is raised when there are too many 7701 CPAAs for an OSPF area. |
|
MaxNumV6ExportRoutesReached |
value=4398 |
package=vprn |
The alarm is raised when the number of IPv6 routes exported from a route table to a VRF reaches the configured maximum. |
|
MgwPeerConnectionStateAlarm |
value=4399 |
package=wlangw |
This alarm is raised when the state of a connection with a Mobile Gateway/ Peer has changed. [CAUSE] The state of a connection with a Mobile Gateway/ Peer has changed to Fault. [EFFECT] The effect depends on the new state. [RECOVERY] No recovery is required on this system. |
|
ESM |
value=4400 |
package=equipment |
The alarm is raised when Encryption State Mismatch is detected. |
|
ESM |
value=4400 |
package=radioequipment |
The alarm is raised when Encryption State Mismatch is detected. |
|
PartialResyncProblem |
value=4401 |
package=netw |
The alarm is raised when a partial resync on an NE fails. For example, when resyncing only some MIB entries as opposed to a full resync. The periodic reachability test (sysUpTime) is not considered a partial resync, neither is a full resync. A full resync is required to clear a PartialResyncProblem alarm. A partial resync does not clear the alarm, because there is no way to determine which partial resync caused the alarm initially. |
|
DaughterCardConfigMissing |
value=4403 |
package=equipment |
The alarm is raised when a supported MDA is inserted into a slot, but the current configuration is not sufficient for the MDA to operate. |
|
BandwidthDegradeForProtectionSwitch |
value=4414 |
package=ethring |
The alarm is raised on Element instance for 9500 when there are two instance per Radio Component (topology) and when one of the instance is enabled. |
|
DAD |
value=4416 |
package=sas |
The alarm is reported when Wavence detects a duplicated IP address. |
|
DAD |
value=4416 |
package=service |
The alarm is reported when Wavence detects a duplicated IP address. |
|
DAD |
value=4416 |
package=equipment |
The alarm is reported when MPR 9500 detects a duplicated IP address. |
|
IncompatibleModulation |
value=4417 |
package=equipment |
The alarm is raised when an incompatibility of the modulation value defect raise. |
|
IncompatibleModulation |
value=4417 |
package=radioequipment |
The alarm is raised when an incompatibility of the modulation value defect raise. |
|
RadRouteDownloadFailed |
value=4418 |
package=aaa |
The alarm is raised when a RADIUS route-download process fails. |
|
DatabaseSqlFormatInvalid |
value=4419 |
package=db |
The alarm is raised when an invalid SQL is detected by the database server. |
|
DynSvcIdRangeConflict |
value=4420 |
package=dynsvc |
The alarm is raised when the configured Dynamic Service ID Range has conflicts with one or more Range Policies. |
|
DynSvcSapFailure |
value=4421 |
package=dynsvc |
The DynSvcSapFailure alarm is raised when a Dynamic Services service SAP creation, modification or removal failed. If the SAP does not exist at the time of this notification, the value 'invalid portid' is put in the alarms sapPortId.' |
|
ApsWorkingForceSwitchedBackToWorking |
value=4432 |
package=vwm |
Automatic Protection Switch (APS) working force switched back to working |
|
ApsWorkingForceSwitchedToProtect |
value=4433 |
package=vwm |
Automatic Protection Switch (APS) working force switched to protection |
|
ApsWorkingManualSwitchedBackToWorking |
value=4434 |
package=vwm |
Automatic Protection Switch (APS) working manual switched back to working |
|
ApsWorkingManualSwitchedToProtect |
value=4435 |
package=vwm |
Automatic Protection Switch (APS) working manual switched to protect |
|
ApsWorkingSwitchedToProtect |
value=4436 |
package=vwm |
Automatic Protection Switch (APS) working switched to protect |
|
Breaker1BatteryFeedDown |
value=4446 |
package=equipment |
The alarm is raised when Power Filter 1 off or voltage low is detected. |
|
DDosCardFpEventOverflow |
value=4460 |
package=equipment |
The alarm is raised when a flood of distributed CPU FP protection events occur on a particular card and some of the events are lost due to event throttling mechanism. |
|
DDosCardSapEventOverflow |
value=4461 |
package=equipment |
The alarm is raised when a flood of distributed CPU protection SAP events occur on a particular card and some of the events are lost due to event throttling mechanism. |
|
DDosCardVrtrIfEventOverflow |
value=4462 |
package=equipment |
The alarm is raised when a flood of distributed CPU protection network-interface events occur on a particular card and some of the events are lost due to event throttling mechanism. |
|
DDosFpDynamicPoolUsageHigh |
value=4463 |
package=equipment |
The alarm is raised when the dynamic enforcement policer pool usage on the forwarding plane is nearly exhausted. |
|
FpgaFail |
value=4485 |
package=equipment |
The alarm is raised when FPGA download failure is detected. |
|
FpgaTimeout |
value=4487 |
package=equipment |
The alarm is raised when FPGA timeout is detected. |
|
HighBer |
value=4489 |
package=radioequipment |
The alarm is raised when High BER is detected. |
|
HighBer |
value=4489 |
package=vwm |
Remote Failure condition present raise notification. |
|
InMaintenance |
value=4492 |
package=equipment |
The alarm is raised when Manually caused abnormal condition - card in maintenance is detected. |
|
InterShelfLossofComms |
value=4495 |
package=equipment |
The alarm is raised when Inter-shelf loss of communication is detected. |
|
LineFacilityLoopbackActive |
value=4502 |
package=equipment |
The alarm is raised when Line Facility loopback active is detected. |
|
LossOfSync |
value=4510 |
package=vwm |
Remote Failure condition present raise notification. |
|
OpticalOutputPowerUnachievable |
value=4524 |
package=equipment |
The alarm is raised when Channel power unachievable is detected. |
|
RemoteFailureIndication |
value=4538 |
package=vwm |
Remote Failure condition present raise notification. |
|
SfpTrmtPwrOOR |
value=4552 |
package=equipment |
The alarm is raised when SFP or XFP optical transmit power out of range is detected. |
|
CoherentOpticalModuleFault |
value=4612 |
package=ethernetequipment |
The alarm is raised when a device reports module fault on a coherent optical interface. |
|
CoherentOpticalModuleHostTxFault |
value=4613 |
package=ethernetequipment |
The alarm is raised when a device reports Host Tx Fault on a coherent optical interface. |
|
CoherentOpticalModuleReferenceLockLoss |
value=4614 |
package=ethernetequipment |
The alarm is raised when a device reports loss of reference lock signal on a coherent optical interface. |
|
CoherentOpticalModuleRxFault |
value=4615 |
package=ethernetequipment |
The alarm is raised when a device reports Rx Fault on a coherent optical interface. |
|
CoherentOpticalModuleTxFault |
value=4616 |
package=ethernetequipment |
The alarm is raised when a device reports Tx Fault on a coherent optical interface. |
|
EfmOamAlarm |
value=4617 |
package=ethernetequipment |
The alarm is raised when EFM Ignore status is Enabled and EFM Operation Status has a fault that is not propagated to the Physical Port Operational State. |
|
WaveTrackerMissingPluggableVOA |
value=4618 |
package=ethernetequipment |
The alarm is raised when a device reports a power control high limit on a wavelength tracker interface. |
|
FWSessionExceededAlarm |
value=4619 |
package=firewall |
The alarm is raised when Max Sessions for firewall is exceeded. |
|
EMSNetworkElementSystemAlarmOverLoad |
value=4620 |
package=hip |
The alarm is raised when the NFM-P detects an overload of EMS alarms in the alarm list. |
|
EMSNetworkElementSystemUnreachable |
value=4621 |
package=hip |
The alarm is raised when the NFM-P detects a HIP communication link failure to the EM System while the EM System is administratively up. The alarm clears when the HIP link returns to service or the EM System is no longer administratively up. |
|
IgmpGrpIfSapMaxGrpSrcLimExcd |
value=4622 |
package=igmp |
This alarm is raised when an attempt is made to configure a group source for a group when the number of group sources is equal to vRtrIgmpGrpIfSapMaxGrpSources, the maximum number of group sources per group supported on the SAP. |
|
IgmpHostMaxGrpSrcsLimitExcd |
value=4623 |
package=igmp |
This alarm is raised when an attempt is made to configure a source for a group when the number of group sources is equal to vRtrIgmpHostMaxGrpSources, the maximum number of group sources per group supported on the host. |
|
IgmpMaxGrpSrcsLimitExceeded |
value=4624 |
package=igmp |
The alarm is raised when an attempt is made to configure an IGMP group source for a group when the number of group sources for this group is equal to 'maxGrpSources', the maximum number of group sources per group supported on the interface. |
|
L2tpTunnelBlacklisted |
value=4625 |
package=l2tp |
This alarm is raised when a L2TP tunnel is added to the tunnel-selection-blacklist. It is automatically cleared when the tunnel is removed from the list. |
|
TunnelSelBlacklistFull |
value=4626 |
package=l2tp |
This alarm is raised when the number of tunnels and peers in the tunnel-selection-blacklist reaches the limit configured on the L2TP Site, and is cleared when the limit is no longer reached. |
|
LudbDhcpHostGroupIfTooLong |
value=4627 |
package=localuserdb |
The alarm is raised when the default MSAP group interface name of a DHCP Host, concatenated with the port ID is longer than 32 characters. |
|
LudbPppHostGroupIfTooLong |
value=4628 |
package=localuserdb |
The alarm is raised when the default MSAP group interface name of a PPP host, concatenated with the port ID is longer than 32 characters. |
|
sourceSapChange |
value=4813 |
package=mirror |
The alarm is raised when a SAP that is associated with this mirror source is modified or deleted. |
|
McIPsecPeerTunnelGroupMissing |
value=4815 |
package=multichassis |
The alarm is raised when the NFM-P cannot find the peer MC IPsec tunnel group. This can be either the peer tunnel group is misconfigured or the local peer group ID is not configured. |
|
McIPsecTunnelGroupDown |
value=4816 |
package=multichassis |
The alarm is raised when a MC IPsec tunnel group is operationally down while it is administratively up. |
|
McIPsecTunnelGroupSyncTagMisconfigured |
value=4817 |
package=multichassis |
The alarm is raised when a peer of MC IPsec tunnel groups has unconfigured or mismatched synchronization tag. |
|
ATPCHighPowerTimeout |
value=4818 |
package=mwa |
The alarm is raised when a MPT detects a ATPC High Power Timeout |
|
CouplingEthernetLinkDown |
value=4819 |
package=mwa |
The alarm is raised when a MPT detects a coupling Ethernet Link Down |
|
CouplingLossOfRadioFrame |
value=4820 |
package=mwa |
The alarm is raised when a MPT detects a Loss of Radio Frame from Coupling Path |
|
CouplingPortSFPCardFailure |
value=4821 |
package=mwa |
This alarm is raised when coupling port SFP Card failure is detected. |
|
CouplingPortSFPMissing |
value=4822 |
package=mwa |
This alarm is raised when coupling port SFP is missing. |
|
DemodulatorUnlocked |
value=4823 |
package=mwa |
The alarm is raised when a MPT detects demodulation failure. |
|
IncompatibleProtection |
value=4824 |
package=equipment |
The alarm is raised in case of hardware incompatibility for 1+1 radio configuration i.e. MPT-HCv2 without RPS or XPIC equipped. |
|
IncompatibleProtection |
value=4824 |
package=mwa |
The alarm is raised when a incompatible protection scheme is selected. |
|
IncompatibleTxPower |
value=4825 |
package=mwa |
The alarm is raised when the provisioned MPT transmit power is incompatible with the MPT hardware. |
|
InterRedundantMPTCommunicationFailure |
value=4826 |
package=mwa |
The alarm is raised when a MPT detects a Inter Redundant MPTs Communication Failure |
|
InterXPolarizedMPTCommunicationFailure |
value=4827 |
package=mwa |
The alarm is raised when a MPT detects a Inter X-Polarized MPTs Communication Failure |
|
LossOfRadioFrame |
value=4828 |
package=mwa |
The alarm is raised when a MPT detects a Loss of Radio Frame from Radio Path |
|
LossOfRadioFramesAlignment |
value=4829 |
package=mwa |
The alarm is raised when a MPT detects a Loss of Radio Frames Alignment |
|
MPTCardFailure |
value=4830 |
package=mwa |
This alarm is raised when MPT card failure is detected. |
|
MPTPlugInCardFailure |
value=4831 |
package=mwa |
This alarm is raised when RPS/XPIC Plug-in card failure is detected. |
|
MwLinkPeerChange |
value=4832 |
package=mwa |
This alarm is raised when a microwave link discovered peer changes. |
|
RDICh1 |
value=4833 |
package=mwa |
The alarm is raised when a MPT receives a remote MPT CH1 remote defect indication |
|
RDIChx |
value=4834 |
package=mwa |
The alarm is raised when a MPT receives a remote MPT CHX remote defect indication |
|
RadioHop15TCA |
value=4835 |
package=mwa |
The alarm is raised when a MPT detects a threshold crossing - Radio hop 15 minutes TCA |
|
RadioHop15UAT |
value=4836 |
package=mwa |
The alarm is raised when a MPT detects a threshold crossing - Radio hop 15 minutes UAT |
|
RadioHop24TCA |
value=4837 |
package=mwa |
The alarm is raised when a MPT detects a threshold crossing - Radio hop 24 Hours TCA |
|
RadioHop24UAT |
value=4838 |
package=mwa |
The alarm is raised when a MPT detects a threshold crossing - Radio hop 24 Hours UAT |
|
RadioLink15TCA |
value=4839 |
package=mwa |
The alarm is raised when a MPT detects a threshold crossing - Radio Link 15 minutes TCA |
|
RadioLink15UAT |
value=4840 |
package=mwa |
The alarm is raised when a MPT detects a threshold crossing - Radio Link 15 minutes UAT |
|
RadioLink24TCA |
value=4841 |
package=mwa |
The alarm is raised when a MPT detects a threshold crossing - Radio Link 24 Hours TCA |
|
RadioLink24UAT |
value=4842 |
package=mwa |
The alarm is raised when a MPT detects a threshold crossing - Radio Link 24 Hours UAT |
|
RadioLoopProblemCh1 |
value=4843 |
package=mwa |
The alarm is raised when a MPT detects a ATPC/ACM Loop problem - CH1 Radio Loop Problem |
|
RadioLoopProblemChx |
value=4844 |
package=mwa |
The alarm is raised when a MPT detects a ATPC/ACM Loop problem - CHX Radio Loop Problem |
|
RadioNotPresent |
value=4845 |
package=mwa |
The alarm is raised when a microwave radio device is no longer detected. |
|
RadioRdi |
value=4846 |
package=mwa |
The alarm is raised when a microwave radio device receives a remote defect indication from the far end microwave radio. |
|
RadioSoftwareDownloadFailed |
value=4847 |
package=mwa |
The alarm is raised when software download fails |
|
RadioSwPackageMissing |
value=4848 |
package=mwa |
The alarm is raised when a valid microwave radio software package is not present at startup. |
|
RadioTxMuted |
value=4849 |
package=mwa |
The alarm is raised when microwave radio transmitter changes state. |
|
SoftwareDownloadInProgress |
value=4850 |
package=mwa |
The alarm is raised when radio software download is in progress - Software download is requested or a forced download is triggered. |
|
XPICCableLoss |
value=4851 |
package=mwa |
The alarm is raised when a MPT detects a XPIC plug-in cable loss |
|
NatLsnSubscriberIcmpPortUsageHigh |
value=4860 |
package=nat |
The alarm is raised when the ICMP port usage of a large-scale NAT subscriber reaches the high or low watermark. |
|
NatLsnSubscriberSessionUsageHigh |
value=4861 |
package=nat |
The alarm is raised when the session usage of a large-scale NAT subscriber reaches the high watermark. The alarm will be cleared when the session usage of a large-scale NAT subscriber reaches its low watermark again. |
|
NatLsnSubscriberTcpPortUsageHigh |
value=4862 |
package=nat |
The alarm is raised when the TCP port usage of a large-scale NAT subscriber reaches the high or low watermark. |
|
NatLsnSubscriberUdpPortUsageHigh |
value=4863 |
package=nat |
The alarm is raised when the UDP port usage of a large-scale NAT subscriber reaches the high or low watermark. |
|
NetConfEventSubscriptionProblem |
value=4864 |
package=netw |
The alarm is raised when the NFM-P is unable to subscribe for Netconf event notification from a network element. For a WMM or CMM: if this problem persists it may result in a loss of PM file collection. |
|
PMFileRecovery |
value=4867 |
package=netw |
The alarm is raised when a NFM-P main server loses connectivity to an NE and as a result retrieves PM files that were not previously collected. |
|
PostDiscoveryScriptExecutionFailed |
value=4868 |
package=netw |
The alarm is raised when the execution of the post discovery script failed. At this point, the NE is successfully discovered, only the auto configuration of the NE defined in the script failed. Manual intervention is required. |
|
PostDiscoveryScriptNotExecuted |
value=4869 |
package=netw |
The alarm is raised when the post discovery script is not executed. This is normally due to NE discovery failure. Manual intervention is required. |
|
RadioSoftwarePackageMissing |
value=4870 |
package=netw |
This alarm is raised when SAR is missing a valid MPR-e SW package in SAR compact flash. |
|
NTPNoServersAvail |
value=4878 |
package=ntp |
The alarm is generated when no NTP Servers are available. |
|
NTPOperDown |
value=4879 |
package=ntp |
The alarm is generated when the NTP Operational State is down for NTP. |
|
NTPServerChange |
value=4880 |
package=ntp |
The alarm generated when more than one NTP servers are configured in a system and a different NTP server is selected because the operational status of the earlier NTP server has changed. |
|
VRtrIfDDosDynamicExceeded |
value=4887 |
package=rtr |
The alarm is raised when the protocol on a particular network interface has been detected as non-conformant to the associated distributed CPU protection policy parameters (on receiving vRtrIfDcpDynamicExcd trap) and the alarm status is set as non-conformant When the network interface starts hold-down period for an exceeding protocol (on receiving vRtrIfDcpDynamicHoldDownStart trap), the alarm status will change into non-conformant(Hold Down Start). When the network interface completes hold-down period for an exceeding protocol (on receiving vRtrIfDcpDynamicHoldDownEnd trap), the alarm status will be changed into non-conformant(Hold Down End). When the protocol for the network interface has been detected as conformant for a period of the configured detection-time after having been previously detected as exceeding and completed any hold-down period (on receiving vRtrIfDcpDynamicConform trap), the alarm will be cleared. |
|
VRtrIfDDosLocMonitorExceeded |
value=4888 |
package=rtr |
The alarm is raised when the local-monitoring-policer for a particular network interface has transitioned from a conformant state to a non-conformant state and the system will attempt to allocate dynamic enforcement policers (on receiving sapDcpLocMonExcd trap), and the alarm status is set as non-conformant When all dynamic enforcement policers associated with a non-conformant local-monitoring-policer have been successfully allocated for the network interface (on receiving sapDcpLocMonExcdAllDynAlloc trap), the alarm status will be changed into non-conformant(Located All). When the local-monitoring-policer for a particular network interface has transitioned from a conformant state to a non-conformant state and the system cannot allocate all the dynamic enforcement policers associated with the distributed CPU protection policy (on receiving sapDcpLocMonExcdDynResource trap), the alarm status will be changed into non-conformant(Cannot Allocate All). When all the previously allocated dynamic enforcement policers for a particular local-monitoring-policer on the associated distributed CPU protection policy have been freed up and all the protocols are once again being monitored by local-monitor (on receiving sapDcpLocMonExcdAllDynFreed trap), the alarm will be cleared. |
|
VRtrIfDDosStaticExceeded |
value=4889 |
package=rtr |
The alarm is raised when the static-policer on a particular network interface has been detected as non-conformant to the associated distributed CPU protection policy parameters (on receiving vRtrIfDcpStaticExcd trap) and the alarm status is set as non-conformant. When the network interface starts hold-down period for the exceeding static-policer (on receiving vRtrIfDcpStaticHoldDownStart trap), the alarm status will change into non-conformant(Hold Down Start). When the network interface ends hold-down period for the exceeding static-policer (on receiving vRtrIfDcpStaticHoldDownEnd trap), the alarm status will be changed into non-conformant(Hold Down End). When the static-policer for the network interface has been detected as conformant for a period of the configured detection-time after having been previously detected as exceeding and completed any hold-down period (on receiving vRtrIfDcpStaticConform trap), the alarm will be cleared. |
|
SapDDosDynamicExceeded |
value=4890 |
package=service |
The alarm is raised when the protocol on a particular SAP has been detected as non-conformant to the associated distributed CPU protection policy parameters (on receiving sapDcpDynamicExcd trap) and the alarm status is set as non-conformant When the SAP starts hold-down period for an exceeding protocol (on receiving sapDcpDynamicHoldDownStart trap), the alarm status will change into non-conformant(Hold Down Start). When the SAP completes hold-down period for an exceeding protocol (on receiving sapDcpDynamicHoldDownEnd trap), the alarm status will be changed into non-conformant(Hold Down End). When the protocol for the SAP has been detected as conformant for a period of the configured detection-time after having been previously detected as exceeding and completed any hold-down period (on receiving sapDcpDynamicConform trap), the alarm will be cleared. |
|
SapDDosLocMonitorExceeded |
value=4891 |
package=service |
The alarm is raised when the local-monitoring-policer for a particular SAP has transitioned from a conformant state to a non-conformant state and the system will attempt to allocate dynamic enforcement policers (on receiving sapDcpLocMonExcd trap), and the alarm status is set as non-conformant When all dynamic enforcement policers associated with a non-conformant local-monitoring-policer have been successfully allocated for the SAP (on receiving sapDcpLocMonExcdAllDynAlloc trap), the alarm status will be changed into non-conformant(Located All). When the local-monitoring-policer for a particular SAP has transitioned from a conformant state to a non-conformant state and the system cannot allocate all the dynamic enforcement policers associated with the distributed CPU protection policy (on receiving sapDcpLocMonExcdDynResource trap), the alarm status will be changed into non-conformant(Cannot Allocate All). When all the previously allocated dynamic enforcement policers for a particular local-monitoring-policer on the associated distributed CPU protection policy have been freed up and all the protocols are once again being monitored by local-monitor (on receiving sapDcpLocMonExcdAllDynFreed trap), the alarm will be cleared. |
|
SapDDosStaticExceeded |
value=4892 |
package=service |
The alarm is raised when the static-policer on a particular SAP has been detected as non-conformant to the associated distributed CPU protection policy parameters (on receiving sapDcpStaticExcd trap) and the alarm status is set as non-conformant. When the SAP starts hold-down period for the exceeding static-policer (on receiving sapDcpStaticHoldDownStart trap), the alarm status will change into non-conformant(Hold Down Start). When the SAP ends hold-down period for the exceeding static-policer (on receiving sapDcpStaticHoldDownEnd trap), the alarm status will be changed into non-conformant(Hold Down End). When the static-policer for the SAP has been detected as conformant for a period of the configured detection-time after having been previously detected as exceeding and completed any hold-down period (on receiving sapDcpStaticConform trap), the alarm will be cleared. |
|
macMoveRateExceededNonBlock |
value=4893 |
package=svt |
The alarm is raised when the SDP exceeds the Service Site's MAC Move Frequency even when limitMacMove(sdpBindTlsLimitMacMove) is set to 'nonBlocking'. |
|
macMoveRateExceededNonBlock |
value=4893 |
package=service |
The alarm is raised when the SAP exceeds the MAC Move Frequency of the service site when limitMacMove(sapTlsLimitMacMove) is set to 'nonBlocking'. |
|
IgmpSnpgGrpSrcLimitExceed |
value=4894 |
package=svt |
The alarm is raised when an IGMP group or source is dropped on a given SDP Bind because a user configurable upper limit given by sdpBndIgmpSnpgCfgMaxNbrGrpSrcs is reached |
|
duplicateAdminGroupName |
value=4895 |
package=svt |
The alarm is raised when two or more global Admin Groups share the same group name. |
|
BgpEventUnreachable |
value=4896 |
package=topology |
The alarm is raised when Unreachable BGP Event is detected. |
|
IgmpSnpgGrpSrcLimitExceeded |
value=4897 |
package=vpls |
The alarm is raised when an IGMP group or source is dropped on a given SAP because a user configurable upper limit given by sapIgmpSnpgCfgMaxNbrGrpSrcs is reached |
|
LSRPATHDown |
value=4898 |
package=mplstp |
The alarm is raised when the TP LSR Path Administrative State is Up and the Operational State is Down. The alarm clears when the TP LSR Path Operational State changes to Up or the Administrative State changes to Down. |
|
RevertiveMisMatch |
value=4899 |
package=mplstp |
This alarm is generated when an MPLS-TP LSP revertive mode mismatch is detected on the protection MEP. The revertive mode must match on the local node and the far-end node. |
|
TPLSPDown |
value=4900 |
package=mplstp |
The alarm is raised when the TP LSP Administrative State is Up and the Operational State is Down. The alarm clears when the TP LSP Operational State changes to Up or the Administrative State changes to Down. |
|
TPLSPPATHDown |
value=4901 |
package=mplstp |
The alarm is raised when the TP LSP Path Administrative State is Up and the Operational State is Down. The alarm clears when the TP LSP Path Operational State changes to Up or the Administrative State changes to Down. |
|
MultiChassisStpBlockingStatus |
value=4902 |
package=aosredundancy |
Primary bridge STP Priority is higher than secondary bridge |
|
McPathsBlackHole |
value=4903 |
package=equipment |
The alarm is raised when one or more multicast (S,G) specifications enters a black-hole state. |
|
FilterApplyPathProblem |
value=4904 |
package=filterprefixlist |
The alarm is raised when a problem is encountered for a configured IP PrefixList apply-path rule. |
|
RadioNoDbFile |
value=4905 |
package=mwa |
The alarm is raised when SAR is not able detect the radio database file specified. |
|
NodeSoftwareMisalignmentDetected |
value=4906 |
package=netw |
The alarm is raised when a software misalignment has been detected on the node and comes back up with an unexpected software version (software change triggered by external tool) To correct this situation it is necessary to download and activate on the node the software referenced by NFM-P and then reconfigure the node with the NFM-P's current configuration. |
|
MacAccountingLimitReached |
value=4907 |
package=rtr |
The alarm is raised when the system detects that the MAC accounting table is full. |
|
MacAccountingLimitReached |
value=4907 |
package=service |
The alarm is raised when the system detects that the MAC accounting table is full. |
|
UnresolvedVirtualPortConfiguration |
value=4908 |
package=dctr |
The alarm is raised when VSD was not able to resolve network configuration for this virtual port. The virtual port will not be assigned an ip address and there is no service associated with it. |
|
VirtualMachineDown |
value=4909 |
package=dctr |
The alarm is raised when VM is shutdown. |
|
VirtualMachineSuspended |
value=4911 |
package=dctr |
The alarm is raised when VM state changes to Paused on this object. |
|
VirtualSwitchDown |
value=4913 |
package=dctr |
The alarm is raised when Openflow session to the virtual switch is lost. |
|
VwmShelfMismatch |
value=4941 |
package=equipment |
The alarm is raised when the configured vwm shelf id is different than the equipped vwm shelf. |
|
VwmShelfRemoved |
value=4942 |
package=equipment |
The alarm is raised when a vwm shelf is removed. |
|
MwLinkEPSActivityChange |
value=4945 |
package=mwa |
This alarm is raised when a microwave link changes activity for EPS. |
|
MwLinkMaintenanceChange |
value=4946 |
package=mwa |
This alarm is raised when a microwave link maintenance command changes. |
|
MwLinkRPSActivityChange |
value=4947 |
package=mwa |
This alarm is raised when a microwave link changes activity for RPS. |
|
MwLinkTPSActivityChange |
value=4948 |
package=mwa |
This alarm is raised when a microwave link changes activity for TPS. |
|
TwampRefInactivityTimeout |
value=4969 |
package=sas |
tmnxTwampSrvNotifClientAddrType, tmnxTwampSrvNotifClientAddr, aluTwampRefNotifLocalAddrType, aluTwampRefNotifLocalAddr, aluTwampRefNotifLocalPort, aluTwampRefNotifRemoteAddrType, aluTwampRefNotifRemoteAddr, aluTwampRefNotifRemotePort The alarm is raised when a TWAMP test session was disconnected by the TWAMP Reflector because the session was inactive for a period exceeding the reflector's inactivity timeout (Reflector Test Session Timeout). The TWAMP reflector cannot receive any traffic on the disconnected session. RECOVERY - Check the IP connectivity between this reflector and the TWAMP client. |
|
RadAcctOnOngoing |
value=4971 |
package=aaa |
The alarm is raised each time when the RADIUS client has sent 10 RADIUS Accounting-On messages without receiving any acknowledgement from the RADIUS server. |
|
AAUrlFilterStateChanged |
value=4972 |
package=aapolicy |
The notification alarm is raised when the operational status has transitioned from 'In Service' to 'Out of Service' and cleared when operational status transitioned from 'Out of Service' to 'In Service'. |
|
FilterEmbeddingOperStateChange |
value=4973 |
package=aclfilter |
The alarm is raised when the embedding oper state change is other than in-service. |
|
HostSharedFilterHighWatermarkAlarm |
value=4974 |
package=aclfilter |
The alarm is raised when the number of dynamically allocated Host Shared Filters based on the indicated filter reaches or exceeds the configured high watermark. This alarm is cleared when the number of dynamically allocated Host Shared Filters drops to or below the configured low watermark of the indicated filter. |
|
NeDatafileSizeAboveThreshold |
value=4975 |
package=db |
The alarm is raised when a tablespace data file size exceeds the used space threshold. This may indicate that the number of stored NE backups or software images is too high. |
|
UnableGetArchivedLogDiskInfo |
value=4976 |
package=db |
The alarm is raised when the NFM-P is unable to get the archive log filesystem information. |
|
DHCPSFoLeaseUpdateFailedAddressConflict |
value=4977 |
package=dhcp |
This alarm is raised when a address conflict lease update received from the failover peer cannot be processed successfully. This DHCP server instance has already leased another address to this host. |
|
DHCPSFoLeaseUpdateFailedHostConflict |
value=4978 |
package=dhcp |
This alarm is raised when a host conflict lease update received from the failover peer cannot be processed successfully. This DHCP server instance has already leased this address to another host. |
|
DHCPSFoLeaseUpdateFailedLeaseExpired |
value=4979 |
package=dhcp |
This alarm is raised when a lease expired lease update received from the failover peer cannot be processed successfully. The lease received from the peer has expired. |
|
DHCPSFoLeaseUpdateFailedMaxLeaseReached |
value=4980 |
package=dhcp |
This alarm is raised when a maximum reached lease update received from the failover peer cannot be processed successfully. The maximum number of leases is already reached. |
|
DHCPSFoLeaseUpdateFailedPeerConflict |
value=4981 |
package=dhcp |
This alarm is raised when a peer conflict lease update received from the failover peer cannot be processed successfully. The failover peer has leased an address within a subnet range of which the failover control is set to 'local' on this local DHCP server instance. |
|
DHCPSFoLeaseUpdateFailedPersistenceCongested |
value=4982 |
package=dhcp |
This alarm is raised when a persistence congested lease update received from the failover peer cannot be processed successfully. The lease received from the peer can not be persistently stored because the persistence subsystem is in overload. |
|
DHCPSFoLeaseUpdateFailedRangeNotFound |
value=4983 |
package=dhcp |
This alarm is raised when a range not found lease update received from the failover peer cannot be processed successfully. No valid include range for this lease could be found. |
|
DHCPSFoLeaseUpdateFailedSubnetNotFound |
value=4984 |
package=dhcp |
This alarm is raised when a subnet not found lease update received from the failover peer cannot be processed successfully. No valid subnet for this lease could be found. |
|
DHCPSFoLeaseUpdateFailedfoShutdown |
value=4985 |
package=dhcp |
This alarm is raised when a shutdown lease update received from the failover peer cannot be processed successfully. The failover state of this DHCP Server instance is 'shutdown'. |
|
DHCPServerFailoverStateChange |
value=4986 |
package=dhcp |
The alarm is raised when the Local DHCP Server Failover has a state other than Normal. |
|
NotEnoughContiguousBlocks |
value=4987 |
package=dhcp |
The alarm is raised when a lease cannot be created because not enough contiguous blocks are found for the requested delegated prefix size. |
|
SubnetBindingFailed |
value=4988 |
package=dhcp |
This alarm is raised when a DHCP server instance cannot offer an IP address to a host, because a subnet binding with its access node (service) is required but not available anymore in the pool. |
|
CPMPChipMemoryEvent |
value=4989 |
package=equipment |
The alarm is raised when a PChip detects a memory error. The alarm is raised against a 7450 ESS, 7710 SR, 7950 SR, or 7750 SR. The alarm is raised against a Release 11.0 NE at R4 or later. |
|
QChipBufferMemoryEvent |
value=4990 |
package=equipment |
The alarm is raised when a Q-chip experiences an occurrence of a buffer memory error on IOM or CPM. |
|
ChipIfCellEvent |
value=4991 |
package=equipment |
The alarm is raised when an inter-chip interface (XPL2 bundle) experiences internal datapath cell errors on IOM or CPM. |
|
ChipIfDownEvent |
value=4992 |
package=equipment |
The alarm is raised when an inter-chip interface (XPL2 bundle) experiences an internal datapath problem on IOM or CPM. |
|
QChipIntMemoryEvent |
value=4993 |
package=equipment |
The alarm is raised when a Q-chip experiences an occurrence of an internal memory error on IOM or CPM. |
|
QChipStatsMemoryEvent |
value=4994 |
package=equipment |
The alarm is raised when a Q-chip experiences an occurrence of a statistics memory error on IOM or CPM. |
|
RingAuditProblem |
value=4995 |
package=ethring |
The alarm is raised when the Ring Audit has detected a problem. |
|
DuplicateRouteDistinguisher |
value=4996 |
package=l3fwd |
The alarm is raised if a duplicate Route Distinguisher is configured on two different NE's on different VPRN Service. |
|
MicroBFDSessionDown |
value=4997 |
package=lag |
The alarm is raised when there is a change in the state of the micro-BFD session of a link (port) of the LAG. When the state is 'idle', 'failed', 'waitingFwd', 'up', then the port is forwarding traffic. When the state is 'waiting', 'down', then the port is not forwarding traffic. |
|
BidirectionalTPLspDestinationMisconfiguration |
value=5117 |
package=mplstp |
The alarm is raised when the Destination Global ID, Destination Node ID, or Destination Tunnel Number is not consistent with the configuration of the opposite TP-LSP in a Bidirectional TP-LSP. |
|
BidirectionalTPLspPathLspNumberMisconfiguration |
value=5118 |
package=mplstp |
The alarm is raised when the LSP Path Number is not consistent with the LSP Path Number for LER A and LER B. |
|
NatMdaDetectsLoadSharingError |
value=5120 |
package=nat |
The alarm is raised when node is sending periodically at most every 10 seconds while a NAT ISA MDA detects that it is receiving packets erroneously, due to incorrect load-balancing by the ingress IOM. The MDA drops all incorrectly load-balanced traffic. |
|
AlarmReplayFailure |
value=5121 |
package=netw |
The alarm is raised when the Alarm Replay fails. It is stored in Alarm Historical table. |
|
NatDeterministicChange |
value=5122 |
package=netw |
The alarm is raised when something changed in the Deterministic NAT map. Such a change may be caused by a modification of the Deterministic NAT Prefix or the Deterministic NAT Map. |
|
NodeSuspended |
value=5123 |
package=netw |
The alarm is raised when the NFM-P detects an NE moved to suspend state as per user request. |
|
DuplicateIpAddress |
value=5129 |
package=rtr |
The alarm is raised when a duplicate routing instance IP Address is found on two or more different NEs. |
|
ManagedRouteAddFailed |
value=5130 |
package=rtr |
The alarm is raised when a managed route could not be installed. |
|
ScriptAlarm |
value=5131 |
package=script |
This alarm was raised from within a NFM-P user script when certain conditions were met, as implemented by the script author. See the alarm's 'Additional Text' for any informative details the script author may have supplied. |
|
LicensedBgpRouteProfileLimitExceeded |
value=5132 |
package=security |
The alarm is raised when the number of BGP Route Profiles in the 5650 CPAM reaches 100 percent of the license capacity. |
|
LicensedBgpRouteProfileLimitNearing |
value=5133 |
package=security |
The alarm is raised when the number of BGP Route Profiles in the 5650 CPAM reaches 75 to 90 percent of the license capacity. |
|
LicensedBgpRouteProfileLimitNearlyExceeded |
value=5134 |
package=security |
The alarm is raised when the number of BGP Route Profiles in the 5650 CPAM reaches 90 to 100 percent of the license capacity. |
|
AuxiliaryServerAssignmentProblem |
value=5135 |
package=server |
This alarm is raised when a NE cannot be assigned to an AuxiliaryServer during load balancing or manual assignment operation. |
|
IOReadFileFromDisk |
value=5136 |
package=server |
The alarm is raised when NFM-P cannot read a file from disk. |
|
IOWriteFileToDisk |
value=5137 |
package=server |
The alarm is raised when NFM-P cannot write a file to disk. |
|
SSLKeystoreCertificateExpired |
value=5138 |
package=server |
The alarm is raised when the SSL Keystore certificate for NFM-P has expired. |
|
SSLKeystoreCertificateExpiring |
value=5139 |
package=server |
This alarm is raised when the NFM-P SSL Keystore certificate is expiring soon. |
|
PersistenceRestoreProblem |
value=5141 |
package=sw |
The alarm is raised when an error is detected while processing a persistence record. |
|
PersistencyFileSysThresRaised |
value=5142 |
package=sw |
The alarm is raised when the filesystem reaches 90 percent usage. |
|
ManualCpaaSwitchover |
value=5143 |
package=topology |
The alarm is raised when an operator has manually initiated a switchover. This alarm is not self clearing. Another switchover will not be permitted for 10 mins. |
|
MgwPeerGtpMismatchAlarm |
value=5144 |
package=wlangw |
This alarm is raised when the Negotiated QoS profile RADIUS attribute contains a release indicator either for GGSN or PGW that does not correspond to the interface type actually used in GTP. e.g. the release indicator is for GGSN and the interface type used in GTP is S2a/S2b while it should be Gn. |
|
PowerCapacityExceeded |
value=5146 |
package=equipment |
The PowerCapacityExceeded alarm is generated when a device needs power to boot, but there is not enough power capacity to support the device. |
|
PowerLostCapacity |
value=5147 |
package=equipment |
The PowerLostCapacity alarm is generated when a power supply fails or is removed which puts the system in an overloaded situation. |
|
PowerOverloadState |
value=5148 |
package=equipment |
The PowerOverloadState alarm is generated when the overloaded power capacity can not support the power requirements and there are no further devices that can be powered off. |
|
PowerSafetyAlertThreshold |
value=5149 |
package=equipment |
The PowerSafetyAlertThreshold notification is generated when the system power capacity drops below the configured safety alert threshold. |
|
PowerSafetyLevelThreshold |
value=5150 |
package=equipment |
The PowerSafetyLevelThreshold notification is generated when the peak nodal power consumption exceeds the configured safety level threshold. |
|
PowerSupplyInputFeedDownAlarm |
value=5154 |
package=equipment |
This alarm is generated if any one of the input feeds for a given power supply is not supplying power. |
|
SubnetFailCtrlError |
value=5156 |
package=dhcp |
The alarm is raised each time a lease is created in a subnet with an inconsistent failover configuration |
|
SubscriberSystemNextHopUsageHigh |
value=5157 |
package=netw |
The alarm is raised when the IP next-hop usage by subscriber managed routes reaches its high watermark, cleared when it reaches its low watermark again; the watermarks are derived from the limit specified with the property subSysNextHopLimit. |
|
SasResultCollectionThresholdExceeded |
value=5158 |
package=sas |
The alarm is raised if test result count exceeds maximum allowed Limit. |
|
DHCPPFoLeaseUpdateFailedAddressConflict |
value=5159 |
package=dhcp |
This alarm is raised when a address conflict lease update received from the failover peer cannot be processed successfully. This DHCP pool instance has already leased another address to this host. |
|
DHCPPFoLeaseUpdateFailedHostConflict |
value=5160 |
package=dhcp |
This alarm is raised when a host conflict lease update received from the failover peer cannot be processed successfully. This DHCP pool instance has already leased this address to another host. |
|
DHCPPFoLeaseUpdateFailedLeaseExpired |
value=5161 |
package=dhcp |
This alarm is raised when a lease expired lease update received from the failover peer cannot be processed successfully. The lease received from the peer has expired. |
|
DHCPPFoLeaseUpdateFailedMaxLeaseReached |
value=5162 |
package=dhcp |
This alarm is raised when a maximum reached lease update received from the failover peer cannot be processed successfully. The maximum number of leases is already reached. |
|
DHCPPFoLeaseUpdateFailedPeerConflict |
value=5163 |
package=dhcp |
This alarm is raised when a peer conflict lease update received from the failover peer cannot be processed successfully. The failover peer has leased an address within a subnet range of which the failover control is set to 'local' on this local DHCP pool instance. |
|
DHCPPFoLeaseUpdateFailedPersistenceCongested |
value=5164 |
package=dhcp |
This alarm is raised when a persistence congested lease update received from the failover peer cannot be processed successfully. The lease received from the peer can not be persistently stored because the persistence subsystem is in overload. |
|
DHCPPFoLeaseUpdateFailedRangeNotFound |
value=5165 |
package=dhcp |
This alarm is raised when a range not found lease update received from the failover peer cannot be processed successfully. No valid include range for this lease could be found. |
|
DHCPPFoLeaseUpdateFailedSubnetNotFound |
value=5166 |
package=dhcp |
This alarm is raised when a subnet not found lease update received from the failover peer cannot be processed successfully. No valid subnet for this lease could be found. |
|
DHCPPFoLeaseUpdateFailedfoShutdown |
value=5167 |
package=dhcp |
This alarm is raised when a shutdown lease update received from the failover peer cannot be processed successfully. The failover state of this DHCP Pool instance is 'shutdown'. |
|
DHCPPoolFailoverStateChange |
value=5168 |
package=dhcp |
The alarm is raised when the Local DHCP Pool Failover has a state other than Normal. |
|
HistCorrDbSizeThresholdExceeded |
value=5169 |
package=histcorr |
The alarm is raised when the actual DB size consumed by Correlation Events exceeds the threshold. |
|
AuxiliaryDatabaseStatus |
value=5173 |
package=db |
This informative alarm is raised when a NFM-P server detects that an auxiliary database server is down. The alarm clears when the node is restored. |
|
DatabaseServerErrors |
value=5174 |
package=db |
The alarm is raised when when a critical Oracle error occurs. |
|
DiamAppMessageDropped |
value=5175 |
package=diameter |
The alarm is raised when the Diameter protocol has dropped a message |
|
LowSwitchFabricCap |
value=5178 |
package=equipment |
The alarm is raised when the total switch fabric capacity becomes less than the line card capacity due to link failures. At least one of the taps on the Card is below 100% capacity. |
|
PowerSupplyACRectifierFailure |
value=5181 |
package=equipment |
This alarm is generated if any one of the AC rectifiers for a given power supply is in a failed state or is missing. When the alarm is raised during device discovery, one or both AC Rectifiers of the Power Supply Tray may be not equipped. When the alarm is raised while the device is in the managed state, one or both AC Rectifiers of the Power Supply Tray might be removed or they have a fault condition. The alarm clears when the status changes to OK. |
|
ProvPowerCapacity |
value=5182 |
package=equipment |
The ProvisionedPowerCapacity alarm is generated if a power zone's provisioned power capacity can no longer support configured devices. |
|
TChipMemoryError |
value=5183 |
package=equipment |
This Alarm is raised when a T-chip experiences an occurrence of an internal memory parity error. |
|
unsupportedPortUsage |
value=5184 |
package=equipment |
The alarm is raised in case unsupported port type is configured |
|
IPSecRUSAFailToAddRoute |
value=5185 |
package=ipsec |
The trap tIPsecRUSAFailToAddRoute is sent when adding route to tIPsecRUSARemAddr for the remote-user tunnel fails with reason indicated by tIPsecNotifReason. |
|
IPsecRUTnlFailToCreate |
value=5186 |
package=ipsec |
This alarm is sent when creation of a remote-user tunnel fails with reason indicated by notifReason. |
|
AuthKeyConflict |
value=5188 |
package=ldp |
The alarm is raised when both Authentication Key and LDP Peer Keychain are configured. LDP Peer Keychain will be used. |
|
AuthKeyConflict |
value=5188 |
package=rsvp |
The alarm is raised when both Authentication Key and RSVP Keychain are configured. RSVP Keychain will be used. |
|
MldGrpIfSapCModeRxQueryMism |
value=5390 |
package=mld |
The alarm is raised when there is a mismatch between the compatible mode of the MLD SAP and the version of the received query. It is generated when the SAP is in MLDv1 compatible mode but it receives an MLDv2. It will include information on the configured version of the compatibility mode of the SAP, and the version of the received query. |
|
MldGrpIfSapMaxGroupsLimitExceeded |
value=5391 |
package=mld |
'This alarm is raised when an attempt is made to configure a group when the number of groups configured on the SAP, is equal to the 'Maximum Number of Groups' supported on the SAP.' |
|
MldGrpIfSapMaxGrpSrcLimExcd |
value=5392 |
package=mld |
This alarm is raised when an attempt is made to configure a group source for a group when the number of group sources is equal to the 'Maximum Number of Group Sources' per group supported on the SAP. |
|
MldGrpIfSapMaxSourcesLimitExceeded |
value=5393 |
package=mld |
'This alarm is raised when an attempt is made to configure a source for a group when the number of sources for this group is equal to the 'Maximum Number of Sources' per group supported on the SAP.' |
|
MldGrpIfSapRxQueryVerMism |
value=5394 |
package=mld |
The alarm is raised when the MLD host SAP is configured as MLDv2 but receives an MLDv1 Query. It will include information on the configured version of the SAP, and the version of the received query. |
|
MldMaxGrpSrcsLimitExceeded |
value=5395 |
package=mld |
The alarm is raised when an attempt is made to configure an MLD group source for a group when the number of group sources for this group is equal to 'maxGrpSources', the maximum number of group sources per group supported on the interface. |
|
MldMaxSrcsLimitExceeded |
value=5396 |
package=mld |
The alarm is raised when an attempt is made to configure an MLD source for a group when the number of sources for this group is equal to 'maxSources', the Maximum Number of Sources per group supported on the interface. |
|
NatLsnSubscriberIcmpPortUsgHigh |
value=5397 |
package=nat |
The alarm is raised when the ICMP port usage of a large-scale NAT subscriber reaches the high or low watermark. |
|
NatLsnSubscriberSessionUsgHigh |
value=5398 |
package=nat |
The alarm is raised when the session usage of a large-scale NAT subscriber reaches the high watermark. The alarm will be cleared when the session usage of a large-scale NAT subscriber reaches its low watermark again. |
|
NatLsnSubscriberTcpPortUsgHigh |
value=5399 |
package=nat |
The alarm is raised when the TCP port usage of a large-scale NAT subscriber reaches the high or low watermark. |
|
NatLsnSubscriberUdpPortUsgHigh |
value=5400 |
package=nat |
The alarm is raised when the UDP port usage of a large-scale NAT subscriber reaches the high or low watermark. |
|
ConcurrentSessionExceedsHigh |
value=5401 |
package=netw |
This alarm is raised when the concurrent security session count exceeds its high watermark. Cleared when it reaches its low watermark again; the watermarks are derived from the limit specified in hi-water-mark and low-water-mark. |
|
ConcurrentSessionExhausted |
value=5402 |
package=netw |
This alarm is raised when the concurrent security session count reaches the system limit. The concurrent session limit can be read in 'Concurrent Active Session Limit'. |
|
StatsPollerProblem |
value=5404 |
package=netw |
The alarm is raised when the NFM-P is unable to poll a network stats object, for example, because of intermittent or no IP connectivity to an NE, incorrect SNMP or Netconf security parameters, or disabled SNMP on the NE. |
|
OFFlowEntryDeploymentCreateFailed |
value=5405 |
package=openflow |
The notification alarm is raised when the flow entry deployment create has failed. |
|
OFFlowEntryDeploymentDeleteFailed |
value=5406 |
package=openflow |
The notification alarm is raised when the flow entry deployment create has failed. |
|
OFLogicalPortStatusMplsTpNotSet |
value=5407 |
package=openflow |
The alarm is raised when the MPLS-TP flag is not set in the Logical Port Status. |
|
OFLogicalPortStatusRsvpTeNotSet |
value=5408 |
package=openflow |
The alarm is raised when the RSVP-TE flag is not set in the Logical Port Status. |
|
OFSwitchDown |
value=5409 |
package=openflow |
The alarm is raised when the Operational State of an OFSwitch is Down and the Administrative State is Up. |
|
DiamAppSessionFailure |
value=5410 |
package=ressubscr |
The alarm is raised when the Diameter protocol has a session failure. |
|
SubVirtualSubnetHostsDeleted |
value=5411 |
package=ressubscr |
This alarm is raised when the NE deletes all existing hosts for a subscriber associated with a virtual subnet because a new default router and/or subnet were assigned. This is the consequence of a configuration change on the server that assigns the subnet. |
|
SasPmBinStatThresholdExceeded |
value=5412 |
package=sas |
The alarm is raised if sas pm bin stats count exceeds threshold limit. This Alarm has to be cleared Manually. |
|
SasPmBinAlarmLimitReached |
value=5413 |
package=server |
The alarm is raised when PM Bin Statistics has exceeded the limit of alarms for an interval. |
|
SubSlaacOverride |
value=5414 |
package=service |
The alarm is raised when an NE notifies the NFM-P that an IPv6 client requests a DHCPv6 non-temporary address (IA_NA) which overrides an existing SLAAC prefix that is assigned to a host. This configuration causes the SLAAC host to be removed from the system. |
|
CpmProtectionViolationSDPEntry |
value=5415 |
package=sitesec |
The alarm is raised when the overall packet arrival rate limit at the SDP is violated. |
|
sdpPbbActvPwWithNonActvCtrlPwChg |
value=5416 |
package=svt |
The alarm is raised when last pseudo-wire (PW) goes standby or down and when first PW becomes active on the Backbone Edge Bridge (BEB) where control PW is standby or down on that SDP. |
|
AllBgpPeerConnectionsDown |
value=5417 |
package=topology |
The alarm is raised when all CPAA's BGP peers went down. |
|
CpaaAreaUnreachableThroughISIS |
value=5418 |
package=topology |
The alarm is raised when all links from CPAA to an area are down. |
|
CpaaAreaUnreachableThroughOSPF |
value=5419 |
package=topology |
The alarm is raised when all links from CPAA to OSPF area are down. |
|
CpaaAreaUnreachableThroughOSPFv3 |
value=5420 |
package=topology |
The alarm is raised when all links from CPAA to OSPFv3 area are down. |
|
WppPortalUnreachable |
value=5421 |
package=wpp |
This alarm is raised when WPP protocol messages are sent out after a node is restarted but no route to the web portal is available. This notification is sent every minute while the portal remains unreachable up to a certain time. After that, all WPP messages to that portal are dropped. |
|
PowerSupplyInputFeedDown |
value=5422 |
package=equipment |
This alarm is generated if any one of the input feeds for a given power supply is not supplying power. |
|
FanCommunicationProblem |
value=5424 |
package=mpr |
The alarm is raised when a communication problem with fan is detected. |
|
RFSwitchFail |
value=5425 |
package=equipment |
The alarm is raised when a RF switch failure is detected. |
|
RFSwitchFail |
value=5425 |
package=mwa |
The alarm is raised when a MPT detects a Radio Frame Switch Failure. |
|
RFSwitchFail |
value=5425 |
package=mpr |
The alarm is raised when a RF switch failure is detected. |
|
SubRackBatteryFail |
value=5426 |
package=mpr |
The alarm is raised when the battery fails or is missing on SubRack. |
|
SubRackSecondaryBatteryFail |
value=5427 |
package=mpr |
The alarm is raised when a secondary battery failure is detected on SubRack. |
|
VSiteServiceImpacted |
value=5430 |
package=dctr |
The alarm is raised on the VSite object when there is an alarm on VPort that affects service. |
|
VirtVpnBGPPrefixConflict |
value=5431 |
package=dctr |
The alarm is raised when routes or service context could be stuck in compute or the network. |
|
VirtVpnBGPPrefixUnreachable |
value=5432 |
package=dctr |
The alarm is raised when there is no route for the VPN regardless of routing on the virtual port. |
|
VirtVpnBGPPrefixWithdrawnNotReceived |
value=5433 |
package=dctr |
The alarm is raised when there is no route on virtual port whereas BGP RIB has a route or routes which do not match. |
|
VirtualPortDown |
value=5434 |
package=dctr |
The alarm is raised when VP is shutdown. |
|
VirtualSwitchIpAddressDuplicated |
value=5435 |
package=dctr |
The alarm is raised when more than one virtual switches in the same domain have the same ip address. Virtual switches that are not belong or have not been associated to any domain are considered to be in 'undefined' domain. |
|
AggregatedVFLPortDown |
value=5436 |
package=equipment |
The alarm is generated when the aggregated virtual fabric link on the virtual chassis slot is down. |
|
CombinerLossOfAlignment |
value=5604 |
package=mpr |
The alarm is raised when there is no alignment between Main and Diversity signal. |
|
CombinerLossOfAlignment |
value=5604 |
package=equipment |
The alarm is raised when there is no alignment between Main and Diversity signal. |
|
CombinerLossOfAlignment |
value=5604 |
package=mwa |
The alarm is raised when a MPT detects a combiner loss of alignment. |
|
FanFail |
value=5609 |
package=equipment |
The alarm is raised when there is fan fail for MPTHLC. |
|
IOMEventOverflow |
value=5617 |
package=equipment |
The alarm is generated when tmnxIomResStateClr, tmnxIomResExhausted and tmnxIomResHighLimitReached occur more than 200 times because of resource usage fluctuation. The IOM raises the final trap to indicate overflow and stops logging traps. |
|
IOMResUtilizationLimit |
value=5618 |
package=equipment |
The alarm is generated when the type of resources on IOM as specified by tmnxIomResourceType has reached the value of tmnxIomResourceLimitPct. |
|
InterConnectPortDDMFailure |
value=5621 |
package=equipment |
The InterConnectPortDDMFailure alarm is generated by 7950 XRS-40 when a small form factor (SFF) connector in a inter connect port that supports Digital Diagnostic Monitoring (DDM) enters failed state. |
|
InterConnectPortLinkDown |
value=5622 |
package=equipment |
The InterConnectPortLinkDown alarm is generated by 7950 XRS-40 when the interconnect port is not operational. The reason may be a cable connected incorrectly, a disconnected cable, a faulty cable, or a misbehaving interconnect port. |
|
InterConnectPortMisconnected |
value=5623 |
package=equipment |
The InterConnectPortMisconnected alarm is generated by 7950 XRS-40 when interconnect ports are misconnected, master chassis interconnect ports should always be connected to appropriate extended chassis interconnect port, there is a misconnection hence this alarm has been raised. |
|
InterConnectPortSFFFailure |
value=5624 |
package=equipment |
The SFFFailure alarm is generated by 7950 XRS-40 when SFF of the interconnect port has failed, this is has been indicated by the field SFFStatus having value read-error. |
|
PlcyAcctStatsEventOvrflw |
value=5640 |
package=equipment |
The alarm is raised because of resource usage fluctuation that happens when the number of in-use stats resource usage exceeds 95 percent and deprecates below 85 percent of the specified stats pool limit more than 200 times. |
|
DataPathFailureProtocolImpact |
value=5642 |
package=equipment |
The alarm is raised when a slot experienced a data path failure which impacted a protocol. |
|
RxDivMissing |
value=5646 |
package=equipment |
The alarm is raised when an MPT is attached with combiner enabled and Rx Diversity module is missing. |
|
SFMInterconnectPortDegraded |
value=5647 |
package=equipment |
The SFMInterconnectPortDegraded alarm is generated by 7950 XRS-40 when the system has detected a reduction in switch fabric capacity because of degrade in a particular SFM interconnect port associated to the switch fabric. This is indicated through the field SfmIcPortDegradeState, the value of the field would not be None in this condition. The value degraded indicates switch fabric capacity on this port is reduced, but SFM interconnect port can still carry some traffic but not all the full capacity of the interconnect port. |
|
SubSysChassMemoryUsageHi |
value=5656 |
package=equipment |
This alarm is raised when the memory usage by subscriber management on this system or chassis reaches its high watermark ('true'). |
|
UnsupportedSFFinInterConnectPort |
value=5659 |
package=equipment |
The UnsupportedSFFinIntetrConnectPort alarm is generated by 7950 XRS-40 when SFF is not recognized by the system or wrong SFF model different from which ALU has recommended is used. The SFF device is not operational and the associated interconnect port cannot be used. |
|
VwmShelfCardIdMismatch |
value=5660 |
package=equipment |
The alarm is raised when the configured vwm card id is different than the equipped vwm card. |
|
VwmShelfCardRemoved |
value=5661 |
package=equipment |
The alarm is raised when a vwm card is removed. |
|
PortEtherSymMonSDAlarm |
value=5662 |
package=ethernetequipment |
The alarm is raised when an Ethernet port Symbol Monitor Failure alarm condition is detected (Signal Degradation Threshold exceeded). |
|
PortEtherSymMonSFAlarm |
value=5663 |
package=ethernetequipment |
The alarm is raised when an Ethernet port Symbol Monitor Failure alarm condition is detected (Signal Failure Threshold exceeded). |
|
ReservedRouteTargetMismatch |
value=6446 |
package=l3fwd |
The alarm is raised when the NFM-P detects a pre-assigned route target on this VPRN has been modified. The alarm information includes the source, i.e., import or export, and the conflict reserved VPRN RT entry distinguished name. |
|
RouteTargetConflict |
value=6447 |
package=l3fwd |
The alarm is raised when the NFM-P detects a conflict between the configured route target on VPRN and the Reserved VPRN Table. The alarm information includes the source, i.e., import or export, and the conflict reserved VPRN RT entry distinguished name. |
|
MaxFecLimitReached |
value=6448 |
package=ldp |
The alarm is raised when the number of FECs accepted from the peer has reached the value specified by fecLimit. The alarm is cleared when a new MaxFecThresholdChange notification is received. |
|
MaxFecThresholdChange |
value=6449 |
package=ldp |
The alarm is raised when the number of FECs accepted from the peer has exceeded the threshold percent of the value specified by fecLimit. The alarm is cleared when the number of FECs received drops below the threshold percent of the value specified by fecLimit. |
|
MldHostCModeRxQueryMismatch |
value=8051 |
package=mld |
The alarm is raised when there is a mismatch between the compatible mode of the MLD Host and the version of the received query, i.e. the Host is in MLDv1 compatible mode but it receives a MLDv2 Query. |
|
MldHostInstantiationFail |
value=8052 |
package=mld |
This alarm is generated when a host is eligible for running MLD, but MLD cannot be started on the host. |
|
MldHostMaxGroupsLimitExceeded |
value=8053 |
package=mld |
This alarm is generated when an attempt is made to configure a group when the number of groups configured on the PIM interface is equal to the maximum number of groups supported on the host. |
|
MldHostMaxGrpSrcsLimitExceeded |
value=8054 |
package=mld |
The alarm is generated when an attempt is made to configure a source for a group when the number of group sources is equal to the maximum number of group sources per group supported on the host. |
|
MldHostMaxSrcsLimitExceeded |
value=8055 |
package=mld |
The alarm is generated when an attempt is made to configure a source for a group when the number of sources for this group is equal to the maximum number of sources per group supported on the host. |
|
MldHostRxQueryVerMismatch |
value=8056 |
package=mld |
The alarm is raised when the MLD host is configured as MLDv2 but receives an MLDv1 Query. It will include information on the configured version of MLD Host, and the version of the received query. |
|
McOmcrClientNumEntriesHigh |
value=8057 |
package=multichassis |
The alarm is raised when the system is configured as an OMCR warm standby system, and the total number of entries in the MCS database for a particular application becomes high. When the 80% and 90% threshold is crossed, there is no effect. When the 100% threshold is exceeded, the peer indicated by the values of tmnxMcPeerIpType and tmnxMcPeerIpAddr is shut down automatically by this system. |
|
McOmcrStatFailedChanged |
value=8058 |
package=multichassis |
The alarm is raised when the value of the object tmnxMcOmcrStatFailed changes from 'notAct' to any of the other values. The alarm is cleared when the value of the object tmnxMcOmcrStatFailed changes to 'notAct' from any of the other values. A transition from 'notAct' or 'no' to 'yes' means that the traffic of some or all associated client application entries' is being dropped. For example, all traffic from some or all of the IPOE subscriber hosts protected by a failed SRRP instance is dropped by this system. A transition to 'no' means that the system has successfully allocated resources for the traffic of all associated client application entries. A transition to 'notAct' means that this system is not performing the active role anymore for this access protection instance. For example, the value of the object tmnxSrrpOperState has become different from 'master' for the corresponding instance. |
|
NatIsaGrpDegraded |
value=8059 |
package=nat |
The alarm is raised when the NAT ISA group is degraded, while operationally still in service. |
|
UnrecommendedNAT64DestinationPrefix |
value=8060 |
package=nat |
This alarm is raised when the bits [64-71] of NAT64 destination prefix are non-zero for prefix length of 96. |
|
CPMALocalInterConnectPortNotAvailable |
value=8061 |
package=netw |
The CPMALocalInterConnectPortNotAvailable alarm is generated by 7950 XRS-40 when the CPM A of Master chassis cannot reach the Extended chassis through local CPM interconnect ports. |
|
CPMBLocalInterConnectPortNotAvailable |
value=8062 |
package=netw |
The CPMBLocalInterConnectPortNotAvailable alarm is generated by 7950 XRS-40 when the CPM B of Master chassis cannot reach the Extended chassis through local CPM interconnect ports. |
|
InterChassisCommunicationDown |
value=8067 |
package=netw |
The InterChassisCommunicationDown alarm is generated by 7950 XRS-40 when the active CPM of Master chassis cannot reach the Extended (far-end) chassis. The resources on the far-end chassis are not available, this event indicates that the CPM, SFM and XCM cards in the far-end chassis will reboot and remain operationally down Until communications are re-established. |
|
TimeRefDisqualified |
value=8072 |
package=netw |
The alarm is raised when a system time input reference is disqualified. |
|
TimeRefSelect |
value=8073 |
package=netw |
The alarm is raised when a system time input reference is selected. |
|
RPSPathFail |
value=8133 |
package=equipment |
The alarm is raised when a receiver protection switchover fails. |
|
RPSPathFail |
value=8133 |
package=radioequipment |
The alarm is raised when a receiver protection switchover fails. |
|
AddressAttachFailed |
value=8134 |
package=rtr |
The alarm is raised when an IP address could not be attached to an interface. |
|
AddressAttachFailed |
value=8134 |
package=service |
The alarm is raised when an IP address could not be attached to an interface. |
|
RPKISessionNotEstablished |
value=8136 |
package=rtr |
The notification alarm is raised when the RPKI Session is not established. |
|
SasResyncWorkerQueueOverflow |
value=8137 |
package=sas |
The alarm is raised when incoming OAM traps can not be handled because the number of tasks that await processing on the SasResyncWorkerPool queue by the NFM-P surpasses the servers capacity to process them. The trap tasks mainly include incoming test results and threshold crossing events. |
|
TwampReflectorAlarm |
value=8138 |
package=sas |
This alarm is raised when a Twamp-Light Session is configured without a matching Reflector Prefix. |
|
RouteTargetMisConfigured |
value=8139 |
package=service |
This alarm is raised when the configured route targets associated with this Reserved Route Target entry has been misconfigured; i.e. the route target RT1 or RT2 is not configured when they are needed for associated VPRN service site creation. The affected route target's relative distinguished name is included in the alarm. |
|
ServiceMisConfigured |
value=8140 |
package=service |
This alarm is raised when the VPRN service associated with a route target reservation entry has been modified, i.e., the service name is changed, or the service is deleted, or there is duplicate VPRN service with the same service and customer name detected. The associated service manager ID is attached with the alarm. |
|
SubscriberMisConfigured |
value=8141 |
package=service |
This alarm is raised when the customer associated with a route target reservation entry has been modified, i.e., the customer name can be changed, or the customer is deleted. |
|
SflowCpEntrySampling |
value=8142 |
package=sflow |
The alarm is raised when the sampling of an sFlow counter poller is interrupted or started. |
|
SflowPacketTransmisionFailure |
value=8143 |
package=sflow |
The alarm is raised when an sFlow packet fails to transmit from an active sFlow receiver. |
|
OperDownInvalidMac |
value=8144 |
package=srrp |
This Alarm is generated when the operational virtual MAC of an SRRP instance conflicts with the MAC of the parent interface. |
|
OperDownInvalidMacClear |
value=8145 |
package=srrp |
The Alarm is generated when a previously occurring OperDownInvalidMac notification has been cleared. Operational virtual MAC of an IPv4 SRRP instance does not have any conflict with the MAC of the parent interface. |
|
MonitoredObjectsCrossThreshold |
value=8146 |
package=sup |
This alarm is raised when total monitored objects count cross certain threshold. It is in warning when the total count exceeds 90% of the limit, and in critical when the total count reaches the limit. It is automatically cleared when the total count is back under the limit and threshold. |
|
UnmanagedMplsTpSDPTunnelSite |
value=8147 |
package=svt |
The alarm is raised when the MPLS-TP SDP Tunnel has configured with a non-managed site. |
|
BgpProfilePrefixUnreachable |
value=8148 |
package=topology |
The alarm is raised when the prefix on BGP profile is unreachable. |
|
VprnTypeMismatched |
value=8149 |
package=vprn |
The alarm is raised when the newly created VPRN Site has a VPRN type that is of a different topology from existing VPRN Sites of the service, i.e, mesh vs hub/spoke, or vice versa. |
|
WlanGwIsaGrpDegraded |
value=8150 |
package=wlangw |
The alarm is raised when the WLAN GW ISA group is degraded, while operationally still in service. |
|
EMSystemTimeOut |
value=8151 |
package=hip |
The alarm is raised when the time out is raised (the NFM-P to EMS request take too long time) |
|
FileTransferFailure |
value=8152 |
package=netw |
The alarm is raised when NFM-P cannot transfer a file from a Network Element due to one or more of the following causes: unreachable NE, remote file not found, authentication failure, file transfer interrupted, or lack of available local storage space. |
|
AuxiliaryDatabaseClusterUnavailable |
value=8154 |
package=db |
This informative alarm is raised when the auxiliary database cluster is not available. |
|
FlashCardFailure |
value=8161 |
package=equipment |
The alarm is raised when there is Flash card failure. |
|
FlashCardRealignmentInProgress |
value=8162 |
package=equipment |
The alarm is raised when MPR Flash card realignment is in progress. |
|
PowerSupplyWrongFanDir |
value=8166 |
package=equipment |
This alarm is generated when the airflow direction of the power supply's fan is incorrect. |
|
rxDivMissing |
value=8372 |
package=mpr |
The alarm is raised when an MPT is attached with combiner enabled and Rx Diversity module is missing. |
|
TmnxBsxUrlListFailure |
value=8374 |
package=aapolicy |
This alarm is generated when a URL list has failed. |
|
TmnxBsxUrlListUpdate |
value=8375 |
package=aapolicy |
This alarm is generated when a URL list has been updated. |
|
APSSwitchover |
value=8376 |
package=aps |
The alarm is raised when APS Switchover happens either from the working channel to the protection or from the protection channel to the working. |
|
DhcpSvrNoSubnetFixAddr |
value=8378 |
package=dhcp |
This alarm can be generated for hosts configured with a fixed IP address in the local user database. If such a host requests an ip-address and the system cannot find a matching subnet in this server instance for this IP address, then this alarm is generated, and the request is dropped. |
|
DiamSessionEventFailure |
value=8379 |
package=diameter |
This alarm is raised when something unusual happens while handling a Diameter session. |
|
XplIngrError |
value=8382 |
package=equipment |
The alarm is raised when an MDA reports persistent Ingress XPL Errors. |
|
GmplsLspDown |
value=8383 |
package=gmplsuni |
The alarm is raised when the GMPLS LSP's Administrative State is Up and the Operational State is Down. The alarm clears when the GMPLS LSP's Operational State changes to Up or the Administrative State changes to Down. |
|
GmplsLspPathBindingDown |
value=8384 |
package=gmplsuni |
The alarm is raised when the GMPLS LSP-path binding's Administrative State is Up and the Operational State is Down. The alarm clears when the GMPLS LSP-path binding's Operational State changes to Up or the Administrative State changes to Down. |
|
MemberDown |
value=8385 |
package=gmplsuni |
The alarm is raised when the GMPLS tunnel group endpoint member's Administrative State is Up and the Operational State is Down. The alarm clears when the GMPLS tunnel group endpoint member's Operational State changes to Up or the Administrative State changes to Down. |
|
TeLinkDown |
value=8386 |
package=gmplsuni |
The alarm is raised when the GMPLS TE link's Administrative State is Up and the Operational State is Down. The alarm clears when the GMPLS TE link's Operational State changes to Up or the Administrative State changes to Down. |
|
TeLinkDown |
value=8386 |
package=lmp |
The alarm is raised when a Traffic-Engineering Link has an Operational State other than Up, and the Administrative State is Up. |
|
SubscriberAuthError |
value=8387 |
package=ies |
This alarm indicates that the system encountered a problem while trying to authenticate a subscriber. |
|
SubscriberAuthError |
value=8387 |
package=vprn |
This alarm indicates that the system encountered a problem while trying to authenticate a subscriber. |
|
DnsIpCacheFull |
value=8388 |
package=isa |
The alarm is raised when the number of entries in a DNS IP Cache is greater than or equal to the percentage value tmnxBsxDnsIpCacheHighWatermark of its tmnxBsxDnsIpCacheSize and the previous percentage value was less than this threshold. And it is clear when the number of entries in a DNS IP Cache is less than or equal to the percentage value tmnxBsxDnsIpCacheLowWatermark of its tmnxBsxDnsIpCacheSize and the previous percentage value was greater than this threshold. |
|
AuthKeyFailure |
value=8389 |
package=ldp |
The alarm is raised when both Authentication Key and LDP Peer Keychain are configured. LDP PeerTransport Keychain will be used. |
|
ControlChannelDown |
value=8390 |
package=lmp |
The alarm is raised when a Control Channel has an Operational State other than Up, and the Administrative State is Up. |
|
DataBearerPropertyMismatch |
value=8391 |
package=lmp |
The alarm is raised when a Data Bearer property mismatch is detected on the node. This notification is only generated the first time a mismatch is detected. |
|
TeLinkPropertyMismatch |
value=8392 |
package=lmp |
The alarm is raised when a Traffic-Engineering Link property mismatch is detected on the node. This notification is only generated the first time a mismatch is detected. |
|
TrafficElectricalEthernetLinkDown |
value=8401 |
package=mwa |
The alarm is raised when the electrical ethernet link goes down. |
|
DhcpLseStateRestoreProblem |
value=8402 |
package=netw |
This alarm is raised when an error is detected while processing a persistency record. |
|
DhcpMiscellaneousProblem |
value=8403 |
package=netw |
This alarm is raised when a miscellaneous DHCP problem occurs. |
|
SubMcsRelatedProblem |
value=8404 |
package=netw |
This alarm is raised when a subscriber management specific problem occurs during Multi Chassis Syncing, e.g. of DHCP lease states. |
|
PTPPortNoTimestamping |
value=8405 |
package=ptp |
The PtpPortNoTimestamping notification is generated when a PTP port is created and the associated Ethernet port does not support IEEE 1588-2008 port-based timestamping. The PTP port is created but the performance may be degraded due to timestamping at the CPM. For optimal performance, ensure PTP is enabled on ports with IEEE 1588-2008 port-based timestamping capability. |
|
radiusServerOutOfService |
value=8406 |
package=subscrauth |
The alarm is raised when the RADIUS server is out of service. |
|
radiusServerOutOfService |
value=8406 |
package=radiusaccounting |
The alarm is raised when the RADIUS server is out of service. |
|
ThresholdCrossingAlert |
value=8407 |
package=sas |
The alarm is raised when a TCA is generated by the node. |
|
PeerToAuxAddressMismatch |
value=8408 |
package=server |
The alarm is raised when standbyAddress in cluster in a NFM-P main server configuration does not match the same property on standby configuration. |
|
DhcpLseStateMobilityError |
value=8409 |
package=service |
This alarm indicates that the system was unable to perform a mobility check for this lease state. |
|
DhcpLseStateMobilityError |
value=8409 |
package=vprn |
This alarm indicates that the system was unable to perform a mobility check for this lease state. |
|
DhcpLseStateMobilityError |
value=8409 |
package=ies |
This alarm indicates that the system was unable to perform a mobility check for this lease state. |
|
PppoeNcpFailure |
value=8410 |
package=service |
This alarm indicates there is a NCP phase setup problem. |
|
SapSubAuthError |
value=8411 |
package=service |
This alarm indicates that the system encountered a problem while trying to authenticate a subscriber. |
|
SubIpoeInvalidCidRidChange |
value=8412 |
package=service |
The alarm is raised when this system fails to create an IPoE session due to an invalid Circuit ID or Remote ID change. |
|
SubIpoeInvalidCidRidChange |
value=8412 |
package=vpls |
The alarm is raised when this system fails to create an IPoE session due to an invalid Circuit ID or Remote ID change. |
|
SubIpoeInvalidSessionKey |
value=8413 |
package=service |
The alarm is raised when this system fails to create an IPoE session due to an invalid session key. |
|
SubIpoeInvalidSessionKey |
value=8413 |
package=vpls |
The alarm is raised when this system fails to create an IPoE session due to an invalid session key. |
|
SubIpoePersistenceRecovery |
value=8414 |
package=service |
The alarm is raised when the NE fails to initialize an IPoE session because it is busy re-initiating objects from persistence files. |
|
SubIpoePersistenceRecovery |
value=8414 |
package=vpls |
The alarm is raised when the NE fails to initialize an IPoE session because it is busy re-initiating objects from persistence files. |
|
SubIpoeSessionLimitReached |
value=8415 |
package=service |
The alarm is raised when this system fails to create an IPoE session because the IPoE session limit is reached. |
|
SubIpoeSessionLimitReached |
value=8415 |
package=vpls |
The alarm is raised when this system fails to create an IPoE session because the IPoE session limit is reached. |
|
SubRadSapCoAError |
value=8416 |
package=service |
This alarm indicates that system was unable to process a Change of Authorization (CoA) request from a Radius server. |
|
CAProfileUpDueToRevokeChkCrlOpt |
value=8417 |
package=sitesec |
This alarm is raised when Certificate Authority profile state changes to 'up' even when there are other alarms, due to revocationCheck is set to 'crlOptional'. |
|
NEBackupRecoveryFailed |
value=8418 |
package=sw |
The alarm is raised when an unexpected directory was found during NE backup recovery. The alarm is cleared when all NE backups located on the file system are already in the NFM-P database or they are recovered successfully in the NFM-P database. |
|
DiamProxyOperationalStateChange |
value=8427 |
package=diameter |
The alarm is raised when the Operational State of a Diameter Peer Proxy is Out Of Service. |
|
PrefixUnreachable |
value=8428 |
package=dctr |
The alarm is raised when the Prefix is unreachable i.e. all the advertising routers are down. |
|
PrimaryVirtualServicesControllerFailed |
value=8429 |
package=dctr |
The alarm is raised when communication between the virtual switch to the primary controller has failed. |
|
VirtualServicesControllerDown |
value=8430 |
package=dctr |
The alarm is raised when Virtual Services Controller is not operationally up. |
|
LinkCle |
value=8437 |
package=equipment |
This alarm is raised when at least one of the Critical Link Event flags is received. |
|
LinkOdnc |
value=8438 |
package=equipment |
This alarm is raised when a OAM Discovery is not completed. |
|
EthernetPortRateMismatchAlarm |
value=8463 |
package=ethernetequipment |
The alarm is raised when an Ethernet port rate selected is not supported by SFP plugged. |
|
StaticLabelMapValueInUse |
value=8965 |
package=mpls |
The alarm is raised when a static LSP configured with a label-map value that is identical to Group Encryption Label, is detected. |
|
RadioEncryptionMismatch |
value=8969 |
package=radioequipment |
The alarm is raised when an AES encryption is diffrent between local and remote NE facing on Radio link. |
|
RadioEncryptionMismatch |
value=8969 |
package=equipment |
The alarm is raised when an AES encryption is different between local and remote NE facing on Radio link. |
|
RadioEncryptionMismatch |
value=8969 |
package=mwa |
The alarm is raised when a MPT detects a radio encryption mismatch. |
|
RxDiversityMissing |
value=8970 |
package=mwa |
The alarm is raised when a MPT detects missing diversity on receiver card. |
|
TrafficOpticalEthernetLinkDown |
value=8971 |
package=mwa |
The alarm is raised when the optical ethernet link goes down. |
|
TrafficPortSFPCardFail |
value=8972 |
package=mwa |
The alarm is raised when a MPT detects a traffic port SFP card failure. |
|
TrafficPortSFPMissing |
value=8973 |
package=mwa |
This alarm is raised when traffic port SFP is missing. |
|
UnknownGroupEncryptLabelDetected |
value=8975 |
package=netw |
The alarm is raised when a Group Encryption label is detected that was not created by NGE Manager. |
|
UnknownKeyGroupDetected |
value=8976 |
package=netw |
The alarm is raised when a Key Group is detected that was not created by NGE Manager. |
|
UnknownKeyGroupKeysDetected |
value=8977 |
package=nge |
The alarm is raised when Key Group Keys are detected that were not created by NGE Manager. |
|
UnknownKeyGroupKeysDetected |
value=8977 |
package=netw |
The alarm is raised when Key Group Keys are detected that were not created by NGE Manager. |
|
UnknownSDPKeyGroupIdDetected |
value=8978 |
package=svt |
The alarm is raised when a Key Group Id is configured on an SDP which was not configured by NGE manager. |
|
UnknownSDPKeyGroupIdDetected |
value=8978 |
package=netw |
The alarm is raised when a Key Group Id is configured on an SDP which was not configured by NGE manager. |
|
UnknownVPRNKeyGroupIdDetected |
value=8979 |
package=vprn |
The alarm is raised when a Key Group Id is configured on an VPRN site which was not configured by NGE manager. |
|
UnknownVPRNKeyGroupIdDetected |
value=8979 |
package=netw |
The alarm is raised when a Key Group Id is configured on an VPRN site which was not configured by NGE manager. |
|
GroupEncryptLabelConfigMismatch |
value=8980 |
package=nge |
The alarm is raised when the Group Encryption Label configuration mismatch is detected. |
|
GroupEncryptLabelCreationFailed |
value=8981 |
package=nge |
The alarm is raised when the Group Encryption Label distribution fails on a site. |
|
GroupEncryptLabelDeletionFailed |
value=8982 |
package=nge |
The alarm is raised when the Group Encryption Label deletion fails on a site. |
|
KeyGroupActiveOutboundSAConfigPending |
value=8983 |
package=nge |
The alarm is raised when the activeOutboundSA configuration stage fails during the encryption process. This alarm is cleared once the encryption process is successful. |
|
KeyGroupConfigMismatch |
value=8984 |
package=nge |
The alarm is raised when a Key Group configuration mismatch is detected. |
|
KeyGroupCreationFailed |
value=8985 |
package=nge |
The alarm is raised when a Key Group distribution fails on a site. |
|
KeyGroupDeletionFailed |
value=8986 |
package=nge |
The alarm is raised when a Key Group deletion fails on a site. |
|
KeyGroupEgressActivationFailed |
value=8987 |
package=nge |
The alarm is raised when activation fails during key distribution. |
|
KeyGroupKeysConfigMismatch |
value=8988 |
package=nge |
The alarm is raised when Key Group Keys configuration mismatch is detected. |
|
KeyGroupKeysCreationFailed |
value=8989 |
package=nge |
The alarm is raised when Key Group Keys distribution fails for a site. |
|
KeyGroupKeysDeletionFailed |
value=8990 |
package=nge |
The alarm is raised when Key Group Keys deletion fails for a site. |
|
KeyGroupKeysVerificationPending |
value=8991 |
package=nge |
The alarm is raised when Key Group Keys verification is failed. This alarm is cleared once the encryption process is successful. |
|
PartialVPRNEncryption |
value=8992 |
package=nge |
The alarm is raised when one or more sites are not encryption enabled in a VPRN service. |
|
RekeyFailed |
value=8993 |
package=nge |
The alarm is raised when Re-key fails during key distribution or activation. |
|
SDPDisableEncryptionFailed |
value=8994 |
package=nge |
The alarm is raised when disabling SDP encryption fails on a site. |
|
SDPEncryptionConfigMismatch |
value=8995 |
package=nge |
The alarm is raised when a SDP Key Group Id mismatch is detected on a site. |
|
SDPEncryptionFailed |
value=8996 |
package=nge |
The alarm is raised when enabling SDP encryption fails on a site. |
|
VPRNDisableEncryptionFailed |
value=8998 |
package=nge |
The alarm is raised when disabling VPRN encryption fails on a site. |
|
VPRNEncryptionConfigMismatch |
value=8999 |
package=nge |
The alarm is raised when a VPRN Key Group Id mismatch is detected on a site. |
|
VPRNEncryptionFailed |
value=9000 |
package=nge |
The alarm is raised when enabling VPRN encryption fails on a site. |
|
BITS2ReferenceLossOfSignal |
value=9002 |
package=sonet |
The alarm is raised when the BITS2 reference on an NE is not qualified due to Loss of Signal. |
|
BITS2ReferenceOutOfFrequency |
value=9003 |
package=sonet |
The alarm is raised when the BITS2 Reference on an NE is not qualified due to Out of frequency. |
|
BITS2ReferenceOutOfPollInRange |
value=9004 |
package=sonet |
The alarm is raised when the BITS2 Reference on an NE is not qualified state due to Out of poll in range. |
|
VirtVpnBGPPrefixUnstable |
value=9010 |
package=vpls |
The alarm is raised when BGP Prefix defined in Service Scope BGP Profile has been matched and Alarm requested by user. The alarm is raised based on 1 min accumulation interval: if during this interval any appropriate BGP Prefix went unreachable OR flapped OR lost redundancy the alarm shall be raised. |
|
VirtVpnBGPPrefixUnstable |
value=9010 |
package=vprn |
The alarm is raised when BGP Prefix defined in Service Scope BGP Profile has been matched and Alarm requested by user. The alarm is raised based on 1 min accumulation interval: if during this interval any appropriate BGP Prefix went unreachable OR flapped OR lost redundancy the alarm shall be raised. |
|
NGEUnsupportedVPRNSiteDetected |
value=9011 |
package=vprn |
The alarm is raised when the VPRN site does not support Network Group Encryption, and auto bind LDP option is enabled. |
|
RekeyCleanupFailed |
value=9013 |
package=nge |
The alarm is raised when Re-key fails during key cleanup. |
|
SapStaticHost6DynamicMacConflict |
value=9021 |
package=antispoof |
The alarm is generated when the system was unable to update the MAC address of a static IPv6 host. |
|
virtualChassisGroupStatusChange |
value=9022 |
package=aosredundancy |
The alarm is raised when VirtualChassis status is changed from UP to Down. |
|
virtualChassisHelloIntervalStatusChange |
value=9023 |
package=aosredundancy |
The alarm is raised when VirtualChassis status is changed from UP to Down. |
|
virtualChassisIdStatusChange |
value=9024 |
package=aosredundancy |
The alarm is raised when VirtualChassis status is changed from UP to Down. |
|
virtualChassisIpcVlanStatusChange |
value=9025 |
package=aosredundancy |
The alarm is raised when VirtualChassis status is changed from UP to Down. |
|
virtualChassisLicenseStatusChange |
value=9026 |
package=aosredundancy |
The alarm is raised when VirtualChassis status is changed from UP to Down. |
|
virtualChassisRoleChange |
value=9027 |
package=aosredundancy |
The alarm is raised when VirtualChassisRole is changed from Master to Slave or Slave to Master. |
|
virtualChassisTypeStatusChange |
value=9028 |
package=aosredundancy |
The alarm is raised when VirtualChassis status is changed from UP to Down. |
|
AssuranceEventLoggingTurnedOff |
value=9029 |
package=assurance |
This alarm is raised when database disk space used to log Assurance Events grows above pre-defined threshold and the internal defense mechanism turns off Assurance Event logging to protect the database disk space. |
|
DynamicPeerLimitReached |
value=9030 |
package=bgp |
The alarm is raised when the dynamic peer limit for this BGP instance is reached. |
|
PeerGroupDynamicPeerLimitReached |
value=9031 |
package=bgp |
The alarm is raised when the dynamic peer limit for this BGP Group is reached. |
|
MinFreePfxThDepleted |
value=9032 |
package=dhcp |
This Alarm is generated when the actual number of free prefixes with minimum free threshold length available in the considered prefix becomes zero. |
|
MinFreePfxThTooLow |
value=9033 |
package=dhcp |
This Alarm is generated when the actual number of free prefixes with minimum free threshold length available in the considered prefix is becoming too low. |
|
MinFreePoolThDepleted |
value=9034 |
package=dhcp |
This Alarm is generated when the actual number of free prefixes with minimum free threshold length available in the pool becomes zero. |
|
MinFreePoolThTooLow |
value=9035 |
package=dhcp |
This Alarm is generated when the actual number of free prefixes with minimum free threshold length available in the pool is becoming too low. |
|
PoolManagerCreateInternalObjectFailed |
value=9036 |
package=dhcp |
This notification is sent when the creation of an internal node object for a pool is failing. [CAUSE] Failed to create an internal object for a pool. [EFFECT] Forwarding will not work for UEs having an address/prefix from this pool. [RECOVERY] No recovery is needed. Retry periodically.' |
|
PoolManagerPoolTimeout |
value=9037 |
package=dhcp |
This notification is sent when a pool is timing out unexpectedly. [CAUSE] Pool timed out unexpectedly. [EFFECT] The pool is removed from the ISA-BB together with all associated UEs. [RECOVERY] No recovery possible. |
|
PoolManagerPoolUsageLow |
value=9038 |
package=dhcp |
This notification is sent when the usage of a pool drops below 1%. [CAUSE] Pool usage dropped below 1%. [EFFECT] The pool has become stale. [RECOVERY] Manually clear the pool. |
|
ProxyMcLocalStateChange |
value=9039 |
package=diameter |
The alarm is raised when proxyMcLocalState of a Diameter Peer Proxy is changed. The states 'active' and 'standby' are normal states. |
|
OESECSwitchOver |
value=9042 |
package=equipment |
The alarm is raised when a OES EC Switch over happens. |
|
OesCtlCardPortDown |
value=9043 |
package=equipment |
This alarm is generated when a port (e.g. ES 1 or AUX) on an OES Control Card is not operational. |
|
OesFan32HReqd |
value=9044 |
package=equipment |
The alarm is raised when the OES chassis in a PSS32 shelf requires high speed fan (FAN32H), but the fan inserted is not the right type. |
|
OesFanFailure |
value=9045 |
package=equipment |
The alarm is raised when the associated fan in the OES chassis is not operationally Up. |
|
OesPortError |
value=9046 |
package=equipment |
This alarm is generated when there is a failure on the device or the transmission of the OES port. |
|
OesPowerSupplyFailure |
value=9047 |
package=equipment |
The alarm is raised when a power filter card reports a failure. |
|
OesUsrpnlPortDown |
value=9048 |
package=equipment |
This alarm is generated when a port (E1 or E2) on an OES USRPNL card is not operational. |
|
SysLicenseExpiresSoon |
value=9049 |
package=equipment |
The alarm is raised when the license is due to expire soon. |
|
SysLicenseInvalid |
value=9050 |
package=equipment |
The alarm is raised when the license becomes invalid for the reason specified in Additional Text. |
|
DuplicateNodeSegmentId |
value=9053 |
package=isis |
The alarm is raised when a duplicate node segment id value is found on two or more different NEs. |
|
DuplicateNodeSegmentId |
value=9053 |
package=ospf |
The alarm is raised when a duplicate node segment id value is found on two or more different NEs. |
|
IsisRejectedAdjacencySID |
value=9054 |
package=isis |
The notification is sent when node do not establish an adjacency SID due to a lack of resources. |
|
IsisSIDError |
value=9055 |
package=isis |
This notification is generated when ISIS receives an IOM or CPM failure (system exhausted ILM, NHLFE, duplicate SID) while resolving and programming a received prefix SID. |
|
IsisSIDNotInLabelRange |
value=9056 |
package=isis |
This notification is generated when ISIS receives a SID which is not within the label range of the next hop router |
|
liMirrorLiNatL2awSubOperStateDown |
value=9567 |
package=mirrorli |
The alarm is raised when the Operational State of the NAT L2 Aware subscriber is Down. |
|
liMirrorLiNatLsnSubOperStateDown |
value=9568 |
package=mirrorli |
The alarm is raised when the Operational State of the NAT LSN subscriber is Down. |
|
McPeerOutOfSync |
value=9569 |
package=multichassis |
The alarm is raised when the sync status of peer is OutOfSync |
|
DeterministicNatMapOperDown |
value=9570 |
package=nat |
The alarm is raised when the Operational State of a Deterministic NAT Map is Down. |
|
DeterministicNatPrefixOperDown |
value=9571 |
package=nat |
The alarm is raised when the Operational State of a Deterministic NAT Prefix is Down and the Administrative State is Up. |
|
ActiveCPMMgmtEthernetPortDown |
value=9572 |
package=netw |
The alarm is raised when the active CPM's management Ethernet port goes operationally down and the standby CPM's management Ethernet port is operationally up and now serving as the system's management Ethernet port. |
|
ArpHostOverride |
value=9573 |
package=netw |
The system generates an svcArpHostOverride notification when it overrides the MAC address of an ARP host. The new MAC address is in svcArpHostMacAddr, while the old MAC address is in svcNotifyMacAddress. [CAUSE] The system overrides the MAC address of an ARP host, because an ARP host with the same IP address as a known ARP host has appeared with a different MAC address. [EFFECT] The MAC address of the known ARP host has changed. [RECOVERY] No recovery required. |
|
NatResourceProblem |
value=9575 |
package=netw |
The alarm is raised when resource problem is detected while attempting to activate some part of the NAT configuration of a system |
|
OesControlCommunicationDown |
value=9576 |
package=netw |
This alarm generated when the active CPM of SR Chassis can not reach the OES master chassis. |
|
OesDbInvalid |
value=9577 |
package=equipment |
During installation,if the OES is not properly commissioned. A downgrade of OES software has occurred. A serial number in the database does not match that of the OES either because the controller was replaced or the alarm card was replaced. Equipment Controller is removed/reseated during a system process, causing file corruption. The database audit failed indicating some type of corruption of the database. |
|
OesDbSyncFailure |
value=9578 |
package=equipment |
This alarm is generated when an active Equipment Controller of OES is unable to synchronize its database with the inactive Equipment Controller. This could be because of incorrectly seated Equipment Controller or the software versions on the active and inactive Equipment Controllers are not compatible or A hardware problem with one or both controllers. |
|
OesDbUnsync |
value=9579 |
package=equipment |
This alarm is generated when the active and standby Equipment Controllers are not in sync. This could be because of the OES does not have redundancy protection between the two Equipment Controller cards. |
|
ProxyArpSysHiUsgSet |
value=9580 |
package=netw |
This alarm is generated when the number of proxy ARP entries in the system exceeds 95% of the system limit. |
|
ProxyNdSysHiUsgSet |
value=9581 |
package=netw |
This alarm is generated when the number of proxy ND entries in the system exceeds 95% of the system limit. |
|
SystemCorruption |
value=9582 |
package=netw |
The alarm is raised when a client-specific persistence event occurs (e.g. the start and completion of a recover action after system startup). |
|
VNFCDown |
value=9583 |
package=nfv |
The alarm is raised when Virtual Network Function VM is not active. |
|
OspfAdvRtrLsaLimitWarning |
value=9585 |
package=ospf |
The alarm is raised when when OSPF reaches Advertise Router LSA limit value or warning limit. |
|
OspfSIDError |
value=9586 |
package=ospf |
This notification is generated when OSPF receives a SID label which is already in use for another prefix. |
|
OspfSIDNotInLabelRange |
value=9587 |
package=ospf |
This notification is generated when OSPF receives a SID which is not within the label range of the next hop router. |
|
ArpEntriesExceededLimit |
value=9588 |
package=rtr |
The alarm is raised when the number of IPv4 ARP entries learned on an IP interface has exceeded the configured maximum. |
|
ArpEntriesExceededLimit |
value=9588 |
package=service |
The alarm is raised when the number of IPv4 ARP entries learned on an IP interface has exceeded the configured maximum. |
|
ArpEntriesExceededThresholdLimit |
value=9589 |
package=rtr |
The alarm is raised when the number of IPv4 ARP entries learned on an IP interface has exceeded vRtrIfArpThreshold percent of the configured maximum as specified by vRtrIfArpLimit. |
|
ArpEntriesExceededThresholdLimit |
value=9589 |
package=service |
The alarm is raised when the number of IPv4 ARP entries learned on an IP interface has exceeded vRtrIfArpThreshold percent of the configured maximum as specified by vRtrIfArpLimit. |
|
NeighborEntriesExceededLimit |
value=9590 |
package=rtr |
The alarm is raised when the maximum amount of IPv6 neighbor entries learned on an IP interface has exceeded the configured maximum. |
|
NeighborEntriesExceededLimit |
value=9590 |
package=service |
The alarm is raised when the maximum amount of IPv6 neighbor entries learned on an IP interface has exceeded the configured maximum. |
|
NeighborEntriesExceededThresholdLimit |
value=9591 |
package=rtr |
The alarm is raised when the number of IPv6 neighbor entries learned on an IP interface has exceeded vRtrIfIpv6NbrThreshold percent of the configured maximum as specified by vRtrIfIpv6NbrLimit. |
|
NeighborEntriesExceededThresholdLimit |
value=9591 |
package=service |
The alarm is raised when the number of IPv6 neighbor entries learned on an IP interface has exceeded vRtrIfIpv6NbrThreshold percent of the configured maximum as specified by vRtrIfIpv6NbrLimit. |
|
HostBGPPeeringSetupFailed |
value=9592 |
package=service |
The alarm indicates that the system was unable to create a BGP neighbor and set up BGP peering for the given host. This alarm is related to the NE trap sapHostBGPPeeringSetupFailed. |
|
PoolManagerAddNewPoolFailed |
value=9593 |
package=service |
This notification is sent when adding a new pool, given by the DHCPv6 server, is failing. (Examples : conflict with existing pool, subnet too small, maximum number of pools reached, out of memory, etc.) [CAUSE] Failed to add a new pool given by the server. [EFFECT] The ISA-BB may run out of free DHCPv6 addresses or SLAAC prefixes. [RECOVERY] No recovery is needed. Retry periodically. |
|
PoolManagerDHCPv6ClientStartFailed |
value=9594 |
package=service |
This notification is sent when a DHCPv6 client of the Pool Manager failed to start. [CAUSE] Failed to start a DHCPv6 client. [EFFECT] No pools can be requested for this ISA-BB. [RECOVERY] Perform a shutdown/no shutdown of the DHCPv6 client. |
|
PoolManagerNewPoolRequestFailed |
value=9595 |
package=service |
This notification is sent when sending a request for a new pool is failing. (For example, when a DHCPv6 server is unreachable.) [CAUSE] Failed to send a request for a new pool. [EFFECT] The ISA-BB may run out of free DHCPv6 addresses or SLAAC prefixes. [RECOVERY] No recovery is needed. Retry periodically. |
|
SubIPoEMigrationHostDelete |
value=9596 |
package=service |
The alarm is raised when system deletes a host for IPoE session migration. |
|
SubIPoEMigrationHostDelete |
value=9596 |
package=vpls |
The alarm is raised when system deletes a host for IPoE session migration. |
|
CRLAfterExpWarning |
value=9597 |
package=sitesec |
The alarm is raised when the CRL file indicated in Certificate Authority profile is expired. |
|
CRLBeforeExpWarning |
value=9598 |
package=sitesec |
The alarm is raised when the CRL file indicated in Certificate Authority profile will expire in the time period as indicated. |
|
CRLUpdateFailureonAllURL |
value=9599 |
package=sitesec |
The alarm is raised when the CRL update operation failed after attempting all URLs for an existing CA Profile. |
|
CRLUpdateFailureonURL |
value=9600 |
package=sitesec |
The alarm is raised when the CRL update operation has failed after attempting the indicated URL for an existing CA Profile. |
|
CertAfterExpWarning |
value=9601 |
package=ipsec |
The alarm is raised when the certificate file indicated in Certificate Profile Entry is expired. |
|
CertAfterExpWarning |
value=9601 |
package=sitesec |
The alarm is raised when the certificate file indicated in Certificate Authority profile is expired. |
|
CertBeforeExpWarning |
value=9602 |
package=ipsec |
The alarm is raised when the certificate file indicated in Certificate Profile Entry will expire in the time period as indicated. |
|
CertBeforeExpWarning |
value=9602 |
package=sitesec |
The alarm is raised when the certificate file indicated in Certificate Authority profile will expire in the time period as indicated. |
|
ProxyArpDupDetect |
value=9604 |
package=vpls |
This alarm is generated when duplicate detection criteria is met when a new mac address overwrites the existing mac address for the proxy arp entry. A traffic disruption may occur if both systems are active. Identify and correct configuration of one of the systems. |
|
ProxyArpSvcHiUsgSet |
value=9605 |
package=vpls |
This alarm is generated when the number of proxy ARP entries in a VPLS service exceeds 95% of the per-service limit. |
|
ProxyNdDupDetect |
value=9606 |
package=vpls |
This alarm is generated when duplicate detection criteria is met when a new mac address overwrites the existing mac address for the proxy ND entry. A traffic disruption may occur if both systems are active. Identify and correct configuration of one of the systems. |
|
ProxyNdSvcHiUsgSet |
value=9607 |
package=vpls |
This alarm is generated when the number of proxy ND entries in a VPLS service exceeds 95% of the per-service limit. |
|
GneInterfaceAlarm |
value=9610 |
package=genericne |
This user-definable alarm is raised against a generic NE when the NFM-P receives a trap from the generic NE that is mapped to the alarm in a generic NE alarm catalogue. The alarm mapping defines the Probable cause, Severity, and Implicitly cleared values, and optionally contains an extension that is appended to the Name value. |
|
IPsecRUTnlRemoved |
value=9611 |
package=ipsec |
This alarm is sent when creation of a remote-user tunnel is removed under certain reasons, which are indicated by notifReason (e.g., failed to renew private address lease with DHCP server) |
|
VnfResourceOperationFailed |
value=9612 |
package=nfv |
The alarm is raised when Virtual Network Function resource is not operationally up. |
|
AuxDatabaseBackupFailed |
value=9613 |
package=db |
The alarm is raised when the auxiliary database backup files cannot be created because of, for example, a lack of disk space or insufficient file permissions. |
|
AuxiliaryDatabaseConnectivityStatus |
value=9614 |
package=db |
This informative alarm is raised when a NFM-P server cannot communicate with an auxiliary database server. The alarm clears when communication is restored. |
|
AuxiliaryDatabaseNodeFailed |
value=9615 |
package=db |
This informative alarm is raised when the auxiliary database node failed and was stopped. |
|
CurrentDataMergeTableCountThresholdExceeded |
value=9616 |
package=db |
This alarm indicated that the auxiliary database is unable to keep up with the update rate for current data during stats collection. The number of pending merges is above the threshold. It is a sign that stats collection is falling behind. Your auxiliary database cluster capacity might not be capable of handling the stats collection load. |
|
CurrentDataMergeTableCountTooHigh |
value=9617 |
package=db |
This alarm indicated that the auxiliary database is unable to keep up with the update rate for current data during stats collection. The number of pending merges is above expected with respect to the number of routers/stats types being collected. It is a sign that stats collection is falling behind. Your auxiliary database cluster capacity might not be capable of handling the stats collection load. |
|
CurrentDataMergeTableTooOld |
value=9618 |
package=db |
This alarm indicated that the auxiliary database is unable to keep up with the update rate for current data during stats collection. Some merge tables stayed in the system longer than the allowed time threshold. It is a sign that stats collection is falling behind. Your auxiliary database cluster capacity might not be capable of handling the stats collection load. |
|
LowInputVoltage |
value=9619 |
package=equipment |
The alarm is raised when Low input voltage is detected. |
|
MdaRuntimeEvent |
value=9620 |
package=equipment |
The alarm is generated when the MDA has experienced a runtime status event worthy of reporting. |
|
PTP1588TCFail |
value=9621 |
package=equipment |
The alarm is raised when ptp failure is detected. |
|
PowerSupplyInputFailure |
value=9622 |
package=equipment |
Generated when one of the chassis's power source supplies fails. |
|
PowerSupplyOutputFailure |
value=9623 |
package=equipment |
Generated when one of the chassis's power output fails. |
|
LocalAccessRequested |
value=9631 |
package=mpr |
The alarm is raised when the Local access is requested by CT |
|
VNFCAutoHealFailed |
value=9632 |
package=nfv |
The alarm is raised when the Auto Heal operation on a given VNF Component fails |
|
NTPMaxAssocTrap |
value=9633 |
package=ntp |
Notify the management entity on reaching the maximum allowable NTP client and peer associations. |
|
AaStatTcaCfgThrshCross |
value=9634 |
package=aapolicy |
The alarm is generated when the utilization matching a AaStatTcaCfg in the past minute is greater than or equal to the value of tcaHighWatermark and the notification is not currently raised for the same entry. |
|
AaStatTcaFilterThrshCross |
value=9635 |
package=aapolicy |
The alarm is generated when the utilization matching a AaStatTcaFilterCfg in the past minute is greater than or equal to the value of tcaHighWatermark and the notification is not currently raised for the same entry. |
|
AaStatTcaFltrEntryThrshCross |
value=9636 |
package=aapolicy |
The alarm is generated when the utilization matching a AaStatTcaFltrEntryCfg in the past minute is greater than or equal to the value of tcaHighWatermark and the notification is not currently raised for the same entry. |
|
AaStatTcaPolicerThrshCross |
value=9637 |
package=aapolicy |
The alarm is generated when the utilization matching a AaStatTcaPolicerCfg in the past minute is greater than or equal to the value of tcaHighWatermark and the notification is not currently raised for the same entry. |
|
AuxDbCannotRollbackToLastGoodEpoch |
value=9638 |
package=db |
This informative alarm is raised when the auxiliary database is corrupted and cannot be started nor rolled back to the last good epoch. |
|
DiamMessageDropped |
value=9639 |
package=diameter |
The alarm is raised when the Diameter protocol has dropped a message. |
|
PowerSupplyAcFailure |
value=9644 |
package=equipment |
This notification is generated when an AC failure occurs on the power supply. |
|
PowerSupplyDcFailure |
value=9645 |
package=equipment |
This notification is generated when a DC failure occurs on the power supply. |
|
PowerSupplyOverTemperature |
value=9646 |
package=equipment |
This notification is generated when a power supply temperature surpasses the threshold of the particular physical chassis. |
|
IsisPrefixLimitWarning |
value=9647 |
package=isis |
The alarm is raised when number of prefixes in the system reaches the PrefixLimitThreshold or the PrefixLimit |
|
FTPLoginMaxAttempts |
value=10267 |
package=netw |
The alarm is raised when the number of ftp login failures due to incorrect user name or password using SSH session exceeds the configured value. |
|
SubMngdHostOverride |
value=10269 |
package=service |
[CAUSE] The alarm indicates a new managed host replaces an existing host with the same IP address. [EFFECT] The existing host is removed from the system. [RECOVERY] None. |
|
SubMngdHostCreationFail |
value=10270 |
package=service |
The alarm indicates an attempt to create a managed host has failed. [CAUSE] A failure occurs while trying to create a managed host. [EFFECT] The context for the managed host is not created. The system cannot provide network connectivity to the host. [RECOVERY] The recovery action depends on the root cause of the failure. The root cause may be a misconfiguration in the client device, the access network, in this system, or in the AAA server configuration. |
|
AuxDbCannotStart |
value=10271 |
package=db |
This informative alarm is raised when the auxiliary database cannot be automatically started. |
|
BareMetalReachabilityDown |
value=10273 |
package=dctr |
The alarm is raised when Bare Metal server is reachability down. |
|
LagPortDown |
value=10275 |
package=equipment |
The alarm is raised when the lag port is down. |
|
LagPortDown |
value=10275 |
package=lag |
The alarm is raised when the lag port is down. |
|
RxProblem |
value=10276 |
package=equipment |
The alarm is raised when Receiver of a lag has problem. |
|
TrafficDown |
value=10277 |
package=equipment |
This alarm is raised when Traffic is down. |
|
TrafficLoss |
value=10278 |
package=equipment |
This alarm is raised when a loss is detected in traffic. |
|
TxProblem |
value=10279 |
package=equipment |
The alarm is raised when Trasmitter of a lag has problem. |
|
BofSaveFailed |
value=11056 |
package=sw |
The alarm is raised when the bof save failed |
|
AaTcpValTcaCrossed |
value=11057 |
package=aapolicy |
The alarm is generated when the utilization matching a tmnxBsxTcpValTcaEntry in the past minute is greater than or equal to the value of tmnxBsxTcpValTcaHighWatermark and the notification is not currently raised for the same entry. |
|
PccRuleInsertSpaceThresholdAlarm |
value=11058 |
package=aclfilter |
The alarm is raised when the utilization of a filter entry range that is reserved for filter entry insertion increases to the configured maximum value for a PCC rule application insert range. |
|
PccRuleInsertedFltrEntryDropped |
value=11059 |
package=aclfilter |
The alarm is raised when a request to insert a filter entry is not successful for a PCC rule application. |
|
NsgVirtualSwitchDown |
value=11060 |
package=dctr |
The alarm is raised when all Uplinks of the NSG are down. |
|
NsgVirtualSwitchPartiallyDown |
value=11061 |
package=dctr |
The alarm is raised when some Uplinks of the NSG are down. |
|
UplinkDown |
value=11062 |
package=dctr |
The alarm is raised when all connections of the Uplink are down. |
|
DhcpServerAddrAllocationFailure |
value=11064 |
package=dhcp |
This alarm is raised when a DHCP server instance could not allocate an address for a client. [CAUSE] A failure occurs when a DHCP server instance could not allocate an address for a client. The reason could be that the DHCP server instance could not find a free address, or it could be a configuration issue. [EFFECT] The client does not get an IP address lease this time. The client will have to try again if it needs a lease from this system. [RECOVERY] The recovery action, if any, will depend on the reason. |
|
DhcpServerHostConflict |
value=11065 |
package=dhcp |
This alarm is raised when when a host requests an fixed IP address in the local user database and the system detects that this IP address has already been handed out to another (dynamic) host. [RECOVERY] The recovery action, if any, will depend on the reason. |
|
DhcpServerIntLseConflict |
value=11066 |
package=dhcp |
This alarm is raised when DHCP hosts trying to acquire an IP address that was handed through the local address assignment infrastructure, or the local address assignment infrastructure tries to use an IP address that was handed out to a DHCP client. [RECOVERY] The recovery action, if any, will depend on the reason. |
|
DhcpServerLeaseNotOwner |
value=11067 |
package=dhcp |
This alarm is raised when a DHCP message is received from a DHCP client that does not own the lease indicated by the IP address from the message. [RECOVERY] The recovery action, if any, will depend on the reason. |
|
DhcpServerLeaseOfferedExpired |
value=11068 |
package=dhcp |
This alarm is raised when an offered DHCP lease expires in the 'offered' state. [CAUSE] A failure occurs when a DHCP lease that this system had offered to a client, expires while it is still in the 'offered' state, because this system did not receive a DHCP request message from the client. [EFFECT] The client does not get a lease this time. The client will have to try again if it needs a lease from this system. [RECOVERY] The recovery action, if any, will depend on the reason of the expiry. |
|
DhcpServerPoolUnknown |
value=11069 |
package=dhcp |
This alarm is raised when when the lookup in the local user database for a host returns a poolname which is not defined within the local DHCP server. [RECOVERY] The recovery action, if any, will depend on the reason. |
|
PacketDropped |
value=11070 |
package=dhcp |
The alarm is generated when a DHCP or DHCPv6 server instance dropped a DHCP packet it received. |
|
FirmwareErrorAlarm |
value=11087 |
package=equipment |
The alarm is raised when the device installed in the shelf has an EEPROM that does not contain the correct or recognizable information. |
|
IPSecIsaMemoryHigh |
value=11089 |
package=equipment |
The Alarm is generated when the ISA card memory usage ratio has reached the high watermark ,which is measured by the number of phase 1 and phase 2 security associations (SAs). |
|
IPSecIsaMemoryMax |
value=11090 |
package=equipment |
The Alarm is generated when the ISA card memory usage ratio has reached the Maximum which is measured by the number of phase 1 and phase 2 security associations (SAs). |
|
InventoryErrMod |
value=11095 |
package=equipment |
The alarm is raised when Pluggable Module Inventory Error . |
|
MepFacilityFault |
value=11101 |
package=equipment |
[CAUSE] The tmnxDot1agCfmMepFcltyFaultRaise notification is generated when the associated facility MEP dot1agCfmMepHighestPrDefect has increased. [EFFECT] This notification can be used to correlate the ETH_CFM dot1agCfmFaultAlarm event and the related IF-MIB::linkDown notification caused by the failure of the facility MEP. [RECOVERY] Follow the recovery for the dot1agCfmFaultAlarm and the related IF-MIB::linkDown caused by the failure of the facility MEP. |
|
MepFacilityFault |
value=11101 |
package=service |
[CAUSE] The tmnxDot1agCfmMepFcltyFaultRaise notification is generated when the associated facility MEP dot1agCfmMepHighestPrDefect has increased. [EFFECT] This notification can be used to correlate the ETH_CFM dot1agCfmFaultAlarm event and the related IF-MIB::linkDown notification caused by the failure of the facility MEP. [RECOVERY] Follow the recovery for the dot1agCfmFaultAlarm and the related IF-MIB::linkDown caused by the failure of the facility MEP. |
|
MepFacilityFault |
value=11101 |
package=lag |
[CAUSE] The tmnxDot1agCfmMepFcltyFaultRaise notification is generated when the associated facility MEP dot1agCfmMepHighestPrDefect has increased. [EFFECT] This notification can be used to correlate the ETH_CFM dot1agCfmFaultAlarm event and the related IF-MIB::linkDown notification caused by the failure of the facility MEP. [RECOVERY] Follow the recovery for the dot1agCfmFaultAlarm and the related IF-MIB::linkDown caused by the failure of the facility MEP. |
|
MepFacilityFault |
value=11101 |
package=rtr |
[CAUSE] The tmnxDot1agCfmMepFcltyFaultRaise notification is generated when the associated facility MEP dot1agCfmMepHighestPrDefect has increased. [EFFECT] This notification can be used to correlate the ETH_CFM dot1agCfmFaultAlarm event and the related IF-MIB::linkDown notification caused by the failure of the facility MEP. [RECOVERY] Follow the recovery for the dot1agCfmFaultAlarm and the related IF-MIB::linkDown caused by the failure of the facility MEP. |
|
OesFanSpeedHigh |
value=11106 |
package=equipment |
The alarm is raised when the fan speed of the OES chassis is too high. |
|
OesFanSpeedLow |
value=11107 |
package=equipment |
The alarm is raised when the fan speed of the OES chassis is too low. |
|
OesFirmwareCondition |
value=11108 |
package=equipment |
The OesFirmwareCondition alarm is generated when the firmware on the card has a condition that needs to be notified. |
|
OesNtpOutOfSync |
value=11109 |
package=equipment |
This alarm is generated when NTP time on the OES is not synchronized to the host router. |
|
OesOpticalTrnspndrMiscFailAlarm |
value=11110 |
package=equipment |
The alarm is raised when a non-service affecting hardware defect was detected on the card. |
|
OesRedundancyFail |
value=11111 |
package=equipment |
The alarm is raised when when the inactive equipment controller card in the OES is not providing redundancy protection. |
|
osuCardUnknown |
value=11134 |
package=equipment |
The alarm is raised when Card unknown is detected. |
|
osuInMaintenance |
value=11135 |
package=equipment |
The alarm is raised when Manually caused abnormal condition - in maintenance is detected. |
|
osuIntTempHigh |
value=11136 |
package=equipment |
The alarm is raised when over temperature is detected. |
|
osuSoftwareUpgradeFailure |
value=11137 |
package=equipment |
The alarm is raised when Software upgrade failed is detected. |
|
osuSoftwareVersionMismatch |
value=11138 |
package=equipment |
The alarm is raised when Software version mismatch is detected. |
|
IsaDatapathCpuUsage |
value=11174 |
package=isa |
The alarm is raised when the current datapath CPU usage on the MDA in the ISA-AA group is greater than or equal to the tmnxBsxDatapathCpuHighWatermark and the prior usage was less than this threshold. |
|
DuplicateNodeIPv6SegmentId |
value=11175 |
package=isis |
The alarm is raised when a duplicate node segment id value is found on two or more different NEs. |
|
liMirrorLiNat64SubOperStateDown |
value=11176 |
package=mirrorli |
The alarm is raised when the Operational State of the NAT64 subscriber is Down. |
|
AlarmDebouncingThresholdReached |
value=11177 |
package=netw |
The alarm is raised when the cache that handles alarm debouncing is at capacity with excess bouncing alarms. When this happens, Alarm Debouncing is disabled and all alarm clear events that are being debounced are processed immediately. Alarm Debouncing is re-enabled after the processing of cached events completes. |
|
NoSFMConfigured |
value=11179 |
package=netw |
The alarm is raised when none of the SFM are configured. |
|
oesCfgBlocked |
value=11180 |
package=netw |
CAUSE This alarm is generated when a configuration being made in the OES was blocked. EFFECT The configuration is not active in the OES. |
|
oesCfgFailNoMemory |
value=11181 |
package=netw |
[CAUSE] The oesCfgFailNoMemory notification is generated when a request to obtain dynamic memory to download a configuration to the OES has failed. [EFFECT] The configuration is not active in the OES. |
|
oesSwBelowMinRev |
value=11182 |
package=netw |
This alarm is generated when the version of the running OES software image is below the minimum expected version. |
|
oesSwUpgdCleanupFailed |
value=11183 |
package=netw |
This alarm is generated when the operation to clean-up a failed software upgrade fails. |
|
oesSwUpgdFailed |
value=11184 |
package=netw |
This alarm is generated when a failure occurs in upgrading a component in the OES. |
|
PXCAdministrativelyDown |
value=11185 |
package=pxc |
The alarm is raised when the PXC AdministrativelyDown. |
|
PXCDown |
value=11186 |
package=pxc |
The alarm is raised when the PXC is OperationallyDown. |
|
RipInterfaceDown |
value=11187 |
package=rip |
The alarm is raised when an RIP interface is operationally down. |
|
CpmProtectionViolationVdoSvcEntry |
value=11188 |
package=sitesec |
The alarm is raised when a per-source rate limit violation is detected for a client address of a Real-time Control Protocol (RTCP) control traffic in VPLS Service. |
|
CpmProtectionViolationVdoVrtrClientEntry |
value=11189 |
package=sitesec |
The alarm is raised when a per-source rate limit violation is detected for a client address of a Real-time Control Protocol (RTCP) control traffic in router context. |
|
KPIThresholdCrossingAlarm |
value=11190 |
package=sup |
This alarm is raised on a monitored object when the monitored object has a KPI TCA policy associated with it and the KPI values for KPIs specified in the TCA policy cross the threshold values defined in the TCA policy. KPI TCA Policy is available as a BETA feature for network supervision web application. |
|
SerialControlLeadsSignalChange |
value=11191 |
package=tdmequipment |
The alarm is generated when there is a change in the status of a serial control lead signal. |
|
CabinAlarm1 |
value=11192 |
package=vwm |
Raised by an SMM unit in case an external cabin alarm input 1 triggers |
|
CabinAlarm2 |
value=11193 |
package=vwm |
Raised by an SMM unit in case an external cabin alarm input 2 triggers |
|
CabinAlarm3 |
value=11194 |
package=vwm |
Raised by an SMM unit in case an external cabin alarm input 3 triggers |
|
CabinAlarm4 |
value=11195 |
package=vwm |
Raised by an SMM unit in case an external cabin alarm input 4 triggers |
|
FrameAlarm1 |
value=11196 |
package=vwm |
Raised by an SMM unit in case an external frame alarm 1 triggers |
|
FrameAlarm10 |
value=11197 |
package=vwm |
Raised by an SMM unit in case an external frame alarm 10 triggers |
|
FrameAlarm11 |
value=11198 |
package=vwm |
Raised by an SMM unit in case an external frame alarm 11 triggers |
|
FrameAlarm12 |
value=11199 |
package=vwm |
Raised by an SMM unit in case an external frame alarm 12triggers |
|
FrameAlarm2 |
value=11200 |
package=vwm |
Raised by an SMM unit in case an external frame alarm 2 triggers |
|
FrameAlarm3 |
value=11201 |
package=vwm |
Raised by an SMM unit in case an external frame alarm 3 triggers |
|
FrameAlarm4 |
value=11202 |
package=vwm |
Raised by an SMM unit in case an external frame alarm 4 triggers |
|
FrameAlarm5 |
value=11203 |
package=vwm |
Raised by an SMM unit in case an external frame alarm 5 triggers |
|
FrameAlarm6 |
value=11204 |
package=vwm |
Raised by an SMM unit in case an external frame alarm 6 triggers |
|
FrameAlarm7 |
value=11205 |
package=vwm |
Raised by an SMM unit in case an external frame alarm 7 triggers |
|
FrameAlarm8 |
value=11206 |
package=vwm |
Raised by an SMM unit in case an external frame alarm 8 triggers |
|
FrameAlarm9 |
value=11207 |
package=vwm |
Raised by an SMM unit in case an external frame alarm 9 triggers |
|
UserAlarm1 |
value=11208 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 1 triggers |
|
UserAlarm10 |
value=11209 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 10 triggers |
|
UserAlarm11 |
value=11210 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 11 triggers |
|
UserAlarm12 |
value=11211 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 12 triggers |
|
UserAlarm13 |
value=11212 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 13 triggers |
|
UserAlarm14 |
value=11213 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 14 triggers |
|
UserAlarm15 |
value=11214 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 15 triggers |
|
UserAlarm16 |
value=11215 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 16 triggers |
|
UserAlarm17 |
value=11216 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 17 triggers |
|
UserAlarm18 |
value=11217 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 18 triggers |
|
UserAlarm19 |
value=11218 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 19 triggers |
|
UserAlarm2 |
value=11219 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 2 triggers |
|
UserAlarm20 |
value=11220 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 20 triggers |
|
UserAlarm21 |
value=11221 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 21 triggers |
|
UserAlarm22 |
value=11222 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 22 triggers |
|
UserAlarm23 |
value=11223 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 23 triggers |
|
UserAlarm24 |
value=11224 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 24 triggers |
|
UserAlarm25 |
value=11225 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 25 triggers |
|
UserAlarm26 |
value=11226 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 26 triggers |
|
UserAlarm27 |
value=11227 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 27 triggers |
|
UserAlarm28 |
value=11228 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 28 triggers |
|
UserAlarm29 |
value=11229 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 29 triggers |
|
UserAlarm3 |
value=11230 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 3 triggers |
|
UserAlarm30 |
value=11231 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 30 triggers |
|
UserAlarm31 |
value=11232 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 31 triggers |
|
UserAlarm32 |
value=11233 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 32 triggers |
|
UserAlarm4 |
value=11234 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 4 triggers |
|
UserAlarm5 |
value=11235 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 5 triggers |
|
UserAlarm6 |
value=11236 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 6 triggers |
|
UserAlarm7 |
value=11237 |
package=vwm |
U Raised by an SMM unit in case an external user alarm input 7 triggers |
|
UserAlarm8 |
value=11238 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 8 triggers |
|
UserAlarm9 |
value=11239 |
package=vwm |
Raised by an SMM unit in case an external user alarm input 9 triggers |
|
ScadaBranchSquelched |
value=11240 |
package=equipment |
This alarm is raised when a Scada branch is squelched. |
|
McLagGatewayPortDown |
value=11241 |
package=dctr |
The alarm is raised when McLagGatewayPort is down. |
|
McLagGatewayPortRedundancyLost |
value=11242 |
package=dctr |
The alarm is raised when VP is shutdown. |
|
RadioLinkStatusDown |
value=11262 |
package=mpr |
This alarm is raised when the Radio Link status changes. |
|
AesFipsFail |
value=11279 |
package=equipment |
The alarm is raised when AES FIPS Failure occurs. |
|
KeyUnavailable |
value=11291 |
package=equipment |
The alarm is raised when Key Unavailable is there for secure certified mode. |
|
adjacencyDown |
value=11462 |
package=mpr |
The alarm is raised when the Operational State of a adjacency is Down, for example, because of one of the following conditions: The Operational State of local port pointer is Down. |
|
backhaulServiceDown |
value=11463 |
package=mpr |
The alarm is raised when the service is down. |
|
inSufficientBandwidth |
value=11464 |
package=mpr |
The alarm is raised when a deployed adjacency doesn't have sufficient bandwidth. |
|
nonDeployedAdjacencyExists |
value=11465 |
package=mpr |
The alarm is raised when a deployed adjacency is deleted on the site. |
|
serviceModified |
value=11466 |
package=mpr |
The alarm is raised when any modification is done post deployment of the service. |
|
topologyMisconfigured |
value=11467 |
package=mpr |
The alarm is raised when any configuration mismatch are present in a service. |
|
RSLHistoryUploadFailure |
value=11468 |
package=mwa |
This alarm is raised when microwave radio RSL History upload fails. |
|
MptSwReconcileFailure |
value=11483 |
package=netw |
This alarm is generated when microwave MPT sw reconcile fails. |
|
PTPClockclassDEG |
value=11511 |
package=ptp |
The alarm is raised if PTP clockclass is smaller than the value of the specific threshold. |
|
PTPPeerDelayRespPkt |
value=11512 |
package=ptp |
The alarm is raised if the 1588 Delay_resp packet is not received. |
|
FailedStatsProcessing |
value=11696 |
package=netw |
PM Collection Issue while converting PM files. |
|
ContainerDown |
value=11825 |
package=dctr |
The alarm is raised when Container is shutdown. |
|
ContainerSuspended |
value=11826 |
package=dctr |
The alarm is raised when Container state changes to Paused on this object. |
|
ApsLOSync |
value=11831 |
package=equipment |
Protected Section Loss of Selector Synchronizations |
|
AuditBlock |
value=11839 |
package=equipment |
Audit Blocked |
|
CPMPChipFCSEvent |
value=11842 |
package=equipment |
The alarm is raised when a PChip detects a Ingress or Egress FCS error. |
|
UnknownNGEEthBindingsDetected |
value=11861 |
package=netw |
The alarm is raised when NGE Ethernet Port Bindings are detected that were not configured by NGE Manager. |
|
UnknownNGEEthBindingsDetected |
value=11861 |
package=equipment |
The alarm is raised when NGE Ethernet Port Bindings are detected that were not configured by NGE Manager. |
|
VNFCHealingRequired |
value=11862 |
package=equipment |
This Alarm is raised to indicate the VNF Assurance KPI engine to heal the specified VM. |
|
insufficientDiskSpace |
value=11865 |
package=mediation |
The alarm is raised when there is insufficient disk space for the image to be downloaded on to flash memory during upgrade |
|
NetworkFunctionMonitoringRuleTriggered |
value=11866 |
package=netw |
Raised when the KPI Policy Framework executes a rule. |
|
TacPlusOperStatusDown |
value=11867 |
package=netw |
The alarm is raised when all TACACS servers have gone down. |
|
UnknownNGERIBindingsDetected |
value=11868 |
package=rtr |
The alarm is raised when NGE Router Interface Bindings are detected that were not configured by NGE Manager. |
|
UnknownNGERIBindingsDetected |
value=11868 |
package=netw |
The alarm is raised when NGE Router Interface Bindings are detected that were not configured by NGE Manager. |
|
svcSysFdbTableHighUsgSet |
value=11869 |
package=netw |
This notification is generated when the system FDB table usage exceeds 95% of the system FDB table size. The system FDB table usage is above 95% of system FDB table size. Clearing notification is generated for the same when the system FDB table usage drops below 90% of the system FDB table size. The system FDB table usage is below 90% of system FDB table size. |
|
NgeEthPortBindingDeleted |
value=11870 |
package=nge |
The alarm is raised when a NGE Ethernet Port Binding is deleted on the site |
|
NgeRIBindingDeleted |
value=11871 |
package=nge |
The alarm is raised when a NGE Router Interface Binding is deleted on the site. |
|
NgeRIIpExceptionMismatch |
value=11872 |
package=nge |
The alarm is raised when a NGE Router Interface Binding IP exception mismatch is detected on a site. |
|
PortDisableEncryptionFailed |
value=11873 |
package=nge |
The alarm is raised when disabling Router Interface encryption fails on a site. |
|
PortEncryptionConfigMismatch |
value=11874 |
package=nge |
The alarm is raised when a Router Interface Key Group Id mismatch is detected on a site. |
|
PortEncryptionFailed |
value=11875 |
package=nge |
The alarm is raised when enabling Router Interface encryption fails on a site. |
|
RIDisableEncryptionFailed |
value=11876 |
package=nge |
The alarm is raised when disabling Router Interface encryption fails on a site. |
|
RIEncryptionConfigMismatch |
value=11877 |
package=nge |
The alarm is raised when a Router Interface Key Group Id mismatch is detected on a site. |
|
RIEncryptionFailed |
value=11878 |
package=nge |
The alarm is raised when enabling Router Interface encryption fails on a site. |
|
UnsupportedNGEDomainSite |
value=11879 |
package=nge |
The alarm is raised when specified Domain Site does not support NGE Domain. |
|
NatMapRuleChangeAlarm |
value=11880 |
package=rtr |
This alarm is raised with when a MAP-T Mapping Rule ceases to be operational. |
|
VdoChnlAnlyzrErrState |
value=11881 |
package=service |
The alarm is raised whenever a video channel analyzer's error state changes to one of these values - TNC (Tech Non-Conformance), QOS (Quality of Service), POA (Program off Air) |
|
ExtShelfSoftwareUpgradeFailed |
value=11882 |
package=sw |
The alarm is raised when an extension shelf software upgrade using the NFM-P fails. |
|
InstanceTransitionedToBackup |
value=11883 |
package=vrrp |
The alarm is raised when the NFM-P detects that a VRRP instance has transitioned to 'Backup' state. |
|
InstanceTransitionedToMaster |
value=11884 |
package=vrrp |
The alarm is raised when the NFM-P detects that a VRRP instance has transitioned to 'Master' state. |
|
ApsBlock |
value=11885 |
package=vwm |
Aps Block |
|
ApsLossOfService |
value=11886 |
package=vwm |
Aps Loss Of Service |
|
TxSquelch |
value=11887 |
package=vwm |
Transmit Squelched |
|
DroolsEngineFailToLoad |
value=11888 |
package=nfv |
The alarm is raised when Drools Engine fail to load the KPI templates. |
|
LcnSubscriptionFailed |
value=11889 |
package=nfv |
The alarm is raised when NFMP is unable to create LCN subscription in CBAM |
|
VnfcToCardCountMismatch |
value=11890 |
package=netw |
The alarm is raised when the number of VNFCs on the NE does not match with the number of cards on the corresponding NE. |
|
SessionManagerCommunicationFailure |
value=11891 |
package=server |
The alarm is raised when Session Manager is unreachable. |
|
NsgConnectionDown |
value=12193 |
package=dctr |
The alarm is raised when a connection of an NSG Uplink lost connectivity. |
|
MemoryCardForbiddenToUse |
value=12194 |
package=equipment |
The alarm is raised as a consequence of the Core-E to CorEvo Upgrade |
|
ServiceSelectiveDrop |
value=12195 |
package=lag |
The alarm is raised when SDH flow Dropped to cross-connected Radio Lag L1 |
|
CommunicationFailure |
value=12370 |
package=server |
The alarm is raised when NSPOS services are unreachable. |
|
SynchronizationSignalFail |
value=12371 |
package=ptp |
The alarm is raised when a synchronization signal failure is detected. |
|
ChassisProblem |
value=12374 |
package=equipment |
This alarm is raised when there is problem with overall chassis power supply. |
|
CriticalEvent |
value=12375 |
package=equipment |
Some sensor critical event asserted |
|
CriticalState |
value=12376 |
package=equipment |
Some equipment is in Critical state |
|
HddCriticalState |
value=12377 |
package=equipment |
Some equipment is in Critical state |
|
HddWarningState |
value=12378 |
package=equipment |
Some equipment is in Warning state |
|
NonRecoverableEvent |
value=12379 |
package=equipment |
Some sensor non recoverable event asserted |
|
PowerSupplyOneProblem |
value=12380 |
package=equipment |
This alarm is raised when there is problem with power supply 1 status |
|
PowerSupplyRedundancyLost |
value=12381 |
package=equipment |
This alarm is raised when the power supply redundancy is lost. |
|
PowerSupplyTwoProblem |
value=12382 |
package=equipment |
This alarm is raised when there is problem with power supply 2 status |
|
SystemEventLogAlmostFull |
value=12386 |
package=equipment |
This alarm is raised when the system event log usage is almost full. |
|
SystemEventLogFull |
value=12387 |
package=equipment |
This alarm is raised when the system event log usage is full. |
|
WarningEvent |
value=12392 |
package=equipment |
Some sensor warning event asserted |
|
WarningState |
value=12393 |
package=equipment |
Some equipment is in Warning state |
|
BackPlaneEPROMFailed |
value=12488 |
package=netw |
The alarm is raised when the active CPM is no longer able to access the backplane EPROM due to a hardware defect. |
|
BackPlaneEPROMWarning |
value=12489 |
package=netw |
The alarm is raised when the active CPM is no longer able to access one backplane EPROM due to a hardware defect but a redundant EPROM is present and accessible. |
|
SecurityViolation |
value=12492 |
package=netw |
The alarm is raised when a mismatch found for IMEI/IMSI/Serial Number. |
|
OspfAreaMaxAgeLsa |
value=12493 |
package=ospf |
This notification is generated when one of the area scope LSAs in the router's link-state database has aged to 'MaxAge'. |
|
OspfAsMaxAgeLsa |
value=12494 |
package=ospf |
This notification is generated when one of the autonomous system scope LSAs in the router's link-state database has aged to 'MaxAge'. |
|
IpTransportDown |
value=12497 |
package=service |
The alarm is raised when an IP Transport operational state is Down. |
|
RS232SquelchChanged |
value=12498 |
package=tdmequipment |
This alarm is raised when there is a change in the status of squelch on the respective port. |
|
RS232Squelched |
value=12499 |
package=tdmequipment |
This alarm is raised when there is a change in the status of squelch on the respective channel. |
|
SerialControlLeadsSignalChanged |
value=12500 |
package=tdmequipment |
The alarm is generated when there is a change in the status of a serial control lead signal. |
|
LastLCNOperationFailed |
value=12502 |
package=nfv |
The alarm is raised when the last LCN operation on the VNF has failed. |
|
MaxRetryReached |
value=12503 |
package=nfv |
Raised when the KPI Policy Framework executes a rule action whose fail count has reached/exceeded the maximum retries specified in the policy attached to the NE. |
|
VNFCOperationFailed |
value=12504 |
package=nfv |
The alarm is raised when the operation on a given VNF Component fails |
|
InvalidMacConfigured |
value=12505 |
package=vrrp |
The alarm is raised when the operational virtual MAC of an VRRP instance conflicts with the MAC of the parent interface, or with the operational virtual MAC addresses of other VRRP instances under the same interface. Due to this the VRRP virtual router instance is not allowed to become operationally 'up'. |
|
PathAttrDiscarded |
value=12508 |
package=bgp |
This alarm is raised when a path attribute is discarded from an UPDATE message. A path attribute may be discarded because it is malformed. The UPDATE message continues to be processed. |
|
PathAttrInvalid |
value=12509 |
package=bgp |
This alarm is raised when an error with a path attribute is detected. Further effect depends on fault-tolerance and graceful-restart settings. |
|
AccessRouteUnreachable |
value=12510 |
package=dctr |
The alarm is raised when there is one or more access route for the NSG virtual switch goes down. |
|
BrPortDown |
value=12511 |
package=dctr |
The alarm is raised when the BR port is unreachable. |
|
DLNextHopReachabilityDown |
value=12512 |
package=dctr |
The alarm is raised when the Domain Linking next hop is unreachable. |
|
DISCONNECTED_GATEWAY_HEAD_LESS |
value=12513 |
package=dctr |
The alarm is raised when NSG gateway was disconnected from the controller and is in controller-less local-and-remote operation mode. |
|
DISCONNECTED_GATEWAY_CONTROLLER_LESS |
value=12514 |
package=dctr |
The alarm is raised when NSG gateway was disconnected from the controller and is in controller-less local-only operation mode. |
|
DISCONNECTED_VRS |
value=12515 |
package=dctr |
The alarm is raised when VRS was disconnected from the controller. |
|
DomainLinkingFailure |
value=12516 |
package=dctr |
The alarm is raised when the BR port or Domain Linking next hop is unreachable. |
|
DUPLICATE_MAC_IN_SUBNET |
value=12517 |
package=dctr |
The alarm is raised when another interface in the network already uses mac-address. |
|
GatewayPortReachabilityDown |
value=12518 |
package=dctr |
The alarm is raised when Gateway VP is reachability down. |
|
INFRASTRUCTURE_PROFILE_NOT_ASSIGNED |
value=12519 |
package=dctr |
The alarm is raised when infrastructure profile not assigned to NSG being bootstrapped. |
|
INFRASTRUCTURE_VSC_PROFILE_ADDRESS_DUPLICATE |
value=12520 |
package=dctr |
The alarm is raised when VSC profiles uses has a duplicate, single, IP Address. |
|
INFRASTRUCTURE_VSC_PROFILE_NOT_ASSIGNED |
value=12521 |
package=dctr |
The alarm is raised when infrastructure VSC Profile not assigned. |
|
INVALID_DOMAIN_IN_VM_REQUEST |
value=12522 |
package=dctr |
The alarm is raised when domain under enterprise does not exist. |
|
INVALID_ENTERPRISE_IN_VM_REQUEST |
value=12523 |
package=dctr |
The alarm is raised when enterprise does not exist. |
|
INVALID_L2DOMAIN_IN_VM_REQUEST |
value=12524 |
package=dctr |
The alarm is raised when L2Domain under Enterprise does not exist. |
|
INVALID_USER_IN_VM_REQUEST |
value=12525 |
package=dctr |
The alarm is raised when user under enterprise does not exist. |
|
INVALID_ZONE_IN_VM_REQUEST |
value=12526 |
package=dctr |
The alarm is raised when zone under enterprise does not exist. |
|
MAINTENANCE_MODE_PARENT |
value=12527 |
package=dctr |
The alarm is raised when domain is currently in maintenance mode. |
|
McLagGatewayPortReachabilityDown |
value=12528 |
package=dctr |
The alarm is raised when Gateway VP is reachability down. |
|
NEW_VM_NO_LIBVIRT |
value=12529 |
package=dctr |
The alarm is raised when new VM event does not have interface information to process. |
|
NO_LICENSES_FOUND |
value=12530 |
package=dctr |
The alarm is raised when there are no license(s) available in the system. |
|
NODE_EXECUTION_FAILURE |
value=12531 |
package=dctr |
The alarm is raised when Virtual AP did not start or Master AP should be up to start virtual APs or Provisioning of vport associated with Virtual AP failed or Deprovisioning of vport associated with Virtual AP failed or Virtual AP cannot be started -> Trying to make Master AP as Virtual AP or Max. number of allowed virtual APs exceeded. |
|
NSG_PORT_DOWN |
value=12532 |
package=dctr |
The alarm is raised when port of gateway [ovs] is down. |
|
NSG_RELOAD_CONFIG_STILL_PENDING |
value=12533 |
package=dctr |
The alarm is raised when an existing reload config is still in progress. |
|
PUBLIC_SUBNET_NOT_ASSOCIATED_TO_SHARED_PUBLIC_SUBNET |
value=12534 |
package=dctr |
The alarm is raised when public subnet is not associated with any shared public subnet. |
|
STATIC_IP_ALREADY_ASSIGNED |
value=12535 |
package=dctr |
The alarm is raised when the IP Address is currently in use. |
|
STATIC_IP_OUT_OF_RANGE |
value=12536 |
package=dctr |
The alarm is raised when could not give static IP. |
|
SUBNET_FULL |
value=12537 |
package=dctr |
The alarm is raised when could not allocate a new IP address. IP addresses has been exhausted. |
|
VPORT_NOT_FOUND |
value=12538 |
package=dctr |
The alarm is raised when cannot find vPort named on server. |
|
VM_ASSOCIATION_WITH_ENTERPRISE_CANNOT_CHANGE |
value=12539 |
package=dctr |
The alarm is raised when vm is already associated with Enterprise. It cannot be associated with a different Enterprise. |
|
VM_ATTACH_TO_L2DOMAIN_PERMISSION |
value=12540 |
package=dctr |
The alarm is raised when user does not have permission to attach the VM to L2Domain. |
|
VM_ATTACH_TO_ZONE_PERMISSION |
value=12541 |
package=dctr |
The alarm is raised when the user does not have permission to attach the VM to Zone. |
|
VM_INTERFACE_LICENSE_VALIDATION |
value=12542 |
package=dctr |
The alarm is raised when max interfaces activation limit reached. |
|
VM_LICENSE_VALIDATION |
value=12543 |
package=dctr |
The alarm is raised when VMs activation license limit has been reached. |
|
VRS_DISCONNECTED_FROM_CONTROLLER |
value=12544 |
package=dctr |
The alarm is raised when VRS was disconnected from the controller. |
|
VRS_LICENSE_VALIDATION |
value=12545 |
package=dctr |
The alarm is raised when max VRSs activation limit reached. |
|
AIMreadFail |
value=12546 |
package=equipment |
The alarm is raised when reading AIM Unit Fails. |
|
DCAndPFoEbothPresent |
value=12547 |
package=equipment |
The alarm is raised when input power both from PoE and DC Cable Detected. |
|
EthOAMLossOfContinuity |
value=12548 |
package=equipment |
This alarm is raised to report (Ethernet OAM Continuity Check) Loss Of Continuity. |
|
EthOAMLossOfContinuity |
value=12548 |
package=ethring |
This alarm is raised to report (Ethernet OAM Continuity Check) Loss Of Continuity. |
|
EthOAMLossOfContinuity |
value=12548 |
package=ethernetoam |
This alarm is raised to report (Ethernet OAM Continuity Check) Loss Of Continuity. |
|
EthOAMMisMergeCondition |
value=12549 |
package=equipment |
This alarm is raised to report (Ethernet OAM Continuity Check) MisMerge Condition. |
|
EthOAMRemoteDefectIndication |
value=12550 |
package=equipment |
This alarm is raised to report (Ethernet OAM Continuity Check) Remote Defect Indication. |
|
EthOAMRemoteDefectIndication |
value=12550 |
package=ethernetoam |
This alarm is raised to report (Ethernet OAM Continuity Check) Remote Defect Indication. |
|
EthOAMUnexpectedLevel |
value=12551 |
package=equipment |
This alarm is raised to report (Ethernet OAM Continuity Check) Unexpected Level. |
|
EthOAMUnexpectedMepId |
value=12552 |
package=equipment |
This alarm is raised to report (Ethernet OAM Continuity Check) Unexpected Mep ID. |
|
EthOAMUnexpectedPeriod |
value=12553 |
package=equipment |
This alarm is raised to report (Ethernet OAM Continuity Check) Unexpected Period. |
|
InterRadioUnitCommunicationProblem |
value=12554 |
package=equipment |
The alarm is raised for a communication probem between radio Units. |
|
RateMismatch |
value=12555 |
package=equipment |
The alarm is raised when a port rate selected is not supported by SFP plugged. |
|
RateMismatch |
value=12555 |
package=vwm |
Remote Failure condition present raise notification. |
|
RxOverload |
value=12556 |
package=equipment |
The alarm is raised when Rx Overload on radio interface defect. |
|
RxOverload |
value=12556 |
package=radioequipment |
The alarm is raised when Rx Overload on radio interface defect. |
|
SatelliteLocalForwardAdministrativelyDown |
value=12557 |
package=localfwd |
The alarm is raised when the satellite local forward is AdministrativelyDown. |
|
SatelliteLocalForwardOperationalStateDown |
value=12558 |
package=localfwd |
The alarm is raised when the satellite local forward is OperationallyDown. |
|
SatelliteLocalForwardSapAdministrativelyDown |
value=12559 |
package=localfwd |
The alarm is raised when the satellite local forward sap is AdministrativelyDown. |
|
SatelliteLocalForwardSapOperationalStateDown |
value=12560 |
package=localfwd |
The alarm is raised when the satellite local forward sap is OperationallyDown. |
|
serviceDropPriorityMismatch |
value=12564 |
package=mpr |
The alarm is raised when the drop priority of the associated vll service is not in par with the inflow entry drop priority |
|
siteDropPriorityMismatch |
value=12565 |
package=mpr |
The alarm is raised when the drop priority of the associated vll service is not in par with the inflow entry drop priority |
|
WarmStart |
value=12566 |
package=netw |
The alarm is raised when the NFM-P receives a SNMPv2-MIB.warmStart trap from an NE. |
|
WlanGwGtpMessageDropped |
value=12567 |
package=netw |
The alarm is raised when the system drops a GTP message while attempting to receive or transmit it. |
|
SystemIpPoolsAreExhausted |
value=12573 |
package=adp |
This alarm is raised when all the System IP addresses are exhausted from the configured System IP Pools and the adpSystemIP field is either learnAlloc or verifyAlloc. |
|
AccessRouteRedundancyLost |
value=12574 |
package=dctr |
The alarm is raised when access route loses ECMP redundancy. |
|
NsgUbrGroupDown |
value=12576 |
package=dctr |
The alarm is raised when the all NSG UBRs in Group are down. |
|
NsgUbrRouteNextHopDown |
value=12577 |
package=dctr |
The alarm is raised when the route next hop is not reachable. |
|
VSAPVSDJMSConnectionDown |
value=12578 |
package=dctr |
The alarm is raised when the JMS Connection to VSD is down or the JMS Broker is not Master. |
|
VSAPVSDReSTConnectionDown |
value=12579 |
package=dctr |
The alarm is raised when the Rest Connection to VSD is not Successful. |
|
MonitorExc |
value=12611 |
package=equipment |
Hardware monitoring capabilities exceeded |
|
FirmwareUpgradeFailed |
value=12653 |
package=sw |
The alarm is raised when a firmware upgrade using the NFM-P fails. |
|
FirmwareUpgraded |
value=12654 |
package=sw |
The alarm is generated when a firmware version upgraded on the node. |
|
ApsSuspended |
value=12656 |
package=vwm |
APS Mechanism interruptedt |
|
Wtr |
value=12657 |
package=vwm |
Wait to restore |
|
PCMInputFeedDownAlarm |
value=12664 |
package=equipment |
This alarm is generated if any one of the input feeds for a given pcm is not supplying power. |
|
PCMRemoved |
value=12665 |
package=equipment |
The alarm is raised when a chassis power connection module is removed. |
|
PowerModuleInputFeedDown |
value=12666 |
package=equipment |
This alarm is generated if any one of the input feeds for a given power module is not supplying power. |
|
PowerModuleOutputFailure |
value=12667 |
package=equipment |
This alarm is generated when an output failure occurs on the power module. |
|
PowerShelfCommunicationDown |
value=12668 |
package=equipment |
This alarm is generated when there is a loss of communications with the power shelf controller. |
|
PowerShelfInputPowerSwitch |
value=12669 |
package=equipment |
This alarm is generated when Power Shelf Input Power Mode has changed value. |
|
NetworkElementDiscoveryFailure |
value=12713 |
package=netw |
The alarm is raised when an error occur during the discovery of the Network Element. The detail of the error is added in the additional information of the alarm with id of the Network Element. The alarm is automatically cleared when the Network Element is discovered or removed from the discovery rule. |
|
PersistencyClosed |
value=12716 |
package=sw |
The alarm is raised when the system is unable to store persistency data (e.g. because the device is inaccessible, or full). |
|
OfflineDuringAdpEncryption |
value=12717 |
package=adp |
The alarm is raised when the head node goes offline during the ADP process. User needs to manually clear the IP Exception filter entries on the node that might be added during the ADP encryption process. |
|
ServiceScopeBfdFailure |
value=12718 |
package=dctr |
The alarm is raised when one or more of BFD sessions are down or missing. |
|
PowerModuleDoorOpen |
value=12720 |
package=equipment |
This alarm is generated when the filter door is either open or not present. |
|
PowerShelfOutputStatusDown |
value=12721 |
package=equipment |
This alarm is generated when physical output switch on the power shelf is set to Standby. |
|
CASiteAdminDown |
value=12723 |
package=macsec |
The alarm is raised when NFM-P detects that the CASite is admin down. This alarm helps to remind the user to turn up the CASite, especially the CASite is associated with a MacsecInterface. The alarm will be cleared if the CASite is admin up. |
|
MacsecMaxPeerLimitExceeded |
value=12724 |
package=macsec |
This alarm is sent when an MKA session exceeds the maximum number of allowable peers. |
|
OutOfSyncWithGlobalCA |
value=12725 |
package=macsec |
The alarm is raised when NFM-P detects that the values of attributes, which are defined to be synced with the global ConnectivityAssociation configuration, are out of sync. |
|
OutOfSyncWithGlobalPSK |
value=12726 |
package=macsec |
The alarm is raised when NFM-P detects that the local PreSharedKey configuration (excluding 'cak') is out of sync with the global. |
|
OutOfSyncWithGlobalStaticCAK |
value=12727 |
package=macsec |
The alarm is raised when NFM-P detects that the values of attributes on local StaticCAK instance, which are defined to be synced with the global configuration, are out of sync. The additionalText contains out of sync attributes. |
|
PreSharedKeyMissing |
value=12728 |
package=macsec |
The alarm is raised when NFM-P detects that the local StaticCAK missed PreSharedKey configuration by comparing with the global StaticCAK. |
|
NatMaxNbrSubsOrHostsExceeded |
value=12729 |
package=nat |
This alarm is generated when the maximum number of LSN/DSM/L2-Aware subscribers or L2-Aware hosts on the member of the MDA has been exceeded. The system cannot process additional subscribers/hosts of that type on ISA member mentioned in the alarm info. |
|
SubBrgCvInitFailed |
value=12730 |
package=netw |
[CAUSE] This alarm is raised when it does not have enough resources to start connectivity verification for a Bridged Residential Gateway (BRG) identified by subBrgId, using the IP address ipAddress in the virtual router instance with identifier vRtrId. Some hardware configurations may have insufficient resources to start and maintain connectivity verification for a huge number of Bridged Residential Gateways. [EFFECT] The system can only relay on the BRG host activity to determine if the BRG is connected. [RECOVERY] Not recovery action required. |
|
SubBrgRadiusAuthError |
value=12731 |
package=netw |
[CAUSE] This alarm is raised when the system encountered a problem while trying to authenticate a Bridged Residential Gateway (BRG) with an Authentication, Authorization, and Accounting (AAA) management system. [EFFECT] No hosts associated with the BRG are reachable via this system. [RECOVERY] Depends on the details of the failure. |
|
SubBrgRadiusCoaError |
value=12732 |
package=netw |
[CAUSE] This alarm is raised when the system was unable to process a Radius Change of Authorization (CoA) request for a Bridged Residential Gateway (BRG). [EFFECT] All hosts associated with the BRG use outdated parameters. [RECOVERY] Depends on the details of the failure. |
|
SubBrgRadiusProxyAuthError |
value=12733 |
package=netw |
[CAUSE] This alarm is raised when the system encountered a problem while trying to authenticate a Bridged Residential Gateway (BRG) through a Radius proxy. [EFFECT] No hosts associated with the BRG are reachable via this system. [RECOVERY] Depends on the details of the failure. |
|
SubBrgRadiusUpdateIpoeSeFail |
value=12734 |
package=netw |
[CAUSE] This alarm is raised when it encounters a failure while processing a Radius update for a Bridged Residential Gateway (BRG), and a failure occurs for one of the associated IPoE sessions. The BRG is identified by subBrgId, the IPoE session by svcId, SAP, and macAddr. Please refer to Additional Text for more details about the failure. Note: If SAP is empty in Additional Text, it means this alarm is on Internal SAP. [EFFECT] A particular IPoE session has outdated parameters. [RECOVERY] Depends on the details of the failure. |
|
SubBrgSessionLimitReached |
value=12735 |
package=netw |
[CAUSE] This alarm is raised when this system fails to create an IPoE session associated with the Bridged Residential Gateway identified by tmnxSubBrgId because its IPoE session limit is exceeded. The IPoE session limit is 128 sessions per BRG. [EFFECT] The system can not set up the IPoE session. [RECOVERY] Not required. This notification is informational. |
|
XMPPConnectionDown |
value=12736 |
package=dctr |
The alarm is raised when XMPP server is not reachable. |
|
CflowdPacketTxFailure |
value=12757 |
package=cflowd |
The tmnxCflowdPacketTxFailure event is generated when a cflowd packet fails to transmit from an active collector host. |
|
UBTPowerSupplyFailure |
value=12758 |
package=equipment |
The alarm is raised when an UBT radio power source has a power supply failure. |
|
MissedStatsCatchUp |
value=12763 |
package=netw |
The alarm is raised when a NFM-P main server cannot communicate with the node to retrieve missed collections intervals. It is manually cleared. |
|
FilterDoorOpen |
value=12764 |
package=equipment |
This alarm is generated when the filter door is either open or not present. |
|
ReachabilityProblemDetails |
value=12765 |
package=netw |
The alarm is raised at the same time as the ReachabilityProblem alarm and gives additional information on the probable cause. The alarm clears at the same time as the ReachabilityProblem alarm. |
|
SimCardFirmwareUpgraded |
value=12811 |
package=cellularequipment |
The alarm is generated when a firmware version upgraded in cellular port. |
|
ReSTOperationFailed |
value=12812 |
package=dctr |
The alarm is raised when the ResT Operation returns error code (other than 2xx) |
|
EquipmentTemperatureTooHigh |
value=12813 |
package=equipment |
The alarm is raised when the equipment temperature is too high. |
|
SysLicenseActivated |
value=12814 |
package=equipment |
The tmnxSysLicenseActivated notification is generated each time a license is activated by the system. |
|
CPMMemorySizeMismatch |
value=12833 |
package=netw |
The alarm is raised when the RAM memory size of the standby CPM is different than the active CPM. |
|
CBAMConnectionFailure |
value=12834 |
package=nfv |
The alarm is raised when connection to CBAM fails. |
|
CpriLocalFault |
value=12835 |
package=vwm |
Remote Failure condition present raise notification. |
|
CpriLossOfFrame |
value=12836 |
package=vwm |
Remote Failure condition present raise notification. |
|
CpriLossOfSignal |
value=12837 |
package=vwm |
Remote Failure condition present raise notification. |
|
CpriRemoteAlarmIndication |
value=12838 |
package=vwm |
Remote Failure condition present raise notification. |
|
HiSer |
value=12839 |
package=vwm |
Remote Failure condition present raise notification. |
|
PumpLaserBiasCurrentHigh |
value=12840 |
package=vwm |
Pump Laser Bias Current High |
|
PumpLaserTempHigh |
value=12841 |
package=vwm |
Pump Laser Temp High |
|
BGP_NEIGHBOR_ALARM |
value=12842 |
package=dctr |
This alarm is raised when BGP Neighbor Alarm is present on gateway/port/vlan ID/neighbor IP |
|
DC_BGP_NEIGHBOR_ALARM |
value=12843 |
package=dctr |
This alarm is raised when the BGP Neighbor Alarm is present on the vport |
|
DISCONNECTED_GATEWAY |
value=12844 |
package=dctr |
This alarm is raised when the gateway was disconnected from the controller. |
|
ELASTIC_HEALTH_CHECK_FAILURE |
value=12845 |
package=dctr |
This alarm is raised when the health check for elastic cluster failed from VSD running on . Please check the health parameters of the elastic cluster or check if the elastic cluster is reachable from the VSD host. |
|
EXCESSIVE_MAC_MOVES |
value=12846 |
package=dctr |
This is a VSD generated alarm for EXCESSIVE_MAC_MOVES error state in vport mediation request |
|
GATEWAY_ATTRIBUTES_MIS_MATCH |
value=12847 |
package=dctr |
This alarm is raised when the gateway instance's attributes do not match. |
|
GATEWAY_DISCONNECTED_FROM_CONTROLLER |
value=12848 |
package=dctr |
This alarm is raised when the gateway with system-id is disconnected from controller |
|
GATEWAY_HAS_LESS_PORTS |
value=12849 |
package=dctr |
This alarm is raised when the gateway Instance is not using set of ports |
|
GATEWAY_HAS_LESS_SERVICES |
value=12850 |
package=dctr |
This alarm is raised when the gateway Instance is not using all configured services. |
|
HTTP_PROBE_FAILURE |
value=12851 |
package=dctr |
This alarm is raised when the IKE gateway connection with UUID is DOWN |
|
IKE_TUNNEL_FAILURE |
value=12852 |
package=dctr |
This alarm is raised when the IKE gateway connection with UUID is DOWN |
|
LICENSE_USAGE_ABOVE_THRESHOLD |
value=12853 |
package=dctr |
This alarm is raised when the license usage above threshold value |
|
MAC_LOOP_ERROR |
value=12854 |
package=dctr |
This alarm is raised when the Excessive MAC moves detected on SAP |
|
NSG_PORT_PHYSICAL_NAME_INVALID |
value=12855 |
package=dctr |
This alarm is raised when the NSG has invalid Physical Port name assigned |
|
NSG_WIFI_SSID_04 |
value=12856 |
package=dctr |
This alarm is raised when the Master AP cannot be attached to a VPort. |
|
NSG_WIFI_SSID_05 |
value=12857 |
package=dctr |
This alarm is raised when the WiFi card supports only 7 virtual APs. |
|
NSG_WIFI_SSID_06 |
value=12858 |
package=dctr |
This alarm is raised when there is no VPort mapping for Virtual AP in OVS DB. Virtual AP not up to be deleted. |
|
NSG_WIFI_VPORT_01 |
value=12859 |
package=dctr |
This alarm is raised when the provisioning of VPort associated with Virtual AP failed. |
|
NSG_WIFI_VPORT_02 |
value=12860 |
package=dctr |
This alarm is raised when the deprovisioning of VPort associated with Virtual AP failed. |
|
NSG_WIFI_VPORT_03 |
value=12861 |
package=dctr |
This alarm is raised when the addition of WiFi port to alubr0 failed. |
|
ONE_TO_ONE_VLAN_MAPPING |
value=12862 |
package=dctr |
This alarm is raised when VLAN and VNID cannot be associated , unique VLAN VNID association is required |
|
PORT_ATTRIBUTES_MIS_MATCH |
value=12863 |
package=dctr |
This alarm is raised when the port's attributes do not match. |
|
PORT_MISSING_IN_AUTO_DISC_GATEWAY |
value=12864 |
package=dctr |
This alarm is raised when the port is not found in gateway configured. |
|
ROUTING_POLICY_ALARM |
value=12865 |
package=dctr |
This alarm is raised when the Routing Policy Alarm on customer ID/ policy name or Routing Policy Alarm on service ID /policy name |
|
SERVICE_ATTRIBUTES_MISMATCH |
value=12866 |
package=dctr |
This alarm is raised when the service type does not match in gateway configured |
|
SERVICE_MISSING_IN_AUTO_DISC_GATEWAY |
value=12867 |
package=dctr |
This alarm is raised when the service is not found in gateway / configured Service is deleted on gateway. |
|
SYSMON_VSC_DOWN |
value=12868 |
package=dctr |
This alarm is raised when the VSC is down |
|
UNIQUE_CONSTRAINT_ADDITION_FAILURE_ERROR |
value=12869 |
package=dctr |
This alarm is raised when the unique constraint addition failed during upgrade |
|
RadiusServerOutOfService |
value=12917 |
package=aaa |
The alarm is raised when the RADIUS server is out of service. |
|
RadiusServerOverloaded |
value=12918 |
package=aaa |
The alarm is raised when the RADIUS server is overloaded. |
|
CallTraceLocSizeLimitReached |
value=12919 |
package=calltrace |
[CAUSE] This notification is triggered when the cumulative size of all call trace log files on a given cflash card on the active CPM has reached the limit specified by the size limit. [EFFECT] New call trace log file(s) cannot be created on the impacted cflash card. [RECOVERY] Operator may execute one of the following actions to restore the functionality: 1) Remove some call trace log files from the cflash card. 2) Increase the size limit for the given cflash card.' |
|
CallTraceMaxFilesNumReached |
value=12920 |
package=calltrace |
[CAUSE] This notification is triggered for the following reasons: 1) Cumulative number of call trace log files present on all cflash cards on the active CPM that are being used for local storage has reached the limit defined by the maximum number of log files. 2) The maximum number of log files has been changed to a value that is lower than the current cumulative number of all call trace log files present on all cflash cards on the active CPM that are being used for local storage. Details about cflash cards that are being used for the local storage of call trace log files can be found in the call trace location. [EFFECT] New call trace log file(s) cannot be created on any cflash card. [RECOVERY] Operator may execute one of the following actions to restore the functionality: 1) Remove some call trace log files from (a) cflash card(s). 2) Increase the maximum number of log files. |
|
ActiveSimChange |
value=12921 |
package=cellularequipment |
The alarm is generated when active SIM card is changed. |
|
AuxiliaryDatabaseReinstalled |
value=12922 |
package=db |
This informative alarm is raised when the auxiliary database was re-installed and the database schema does not exist. |
|
AuxiliaryDatabaseSchemaRecreated |
value=12923 |
package=db |
This informative alarm is raised when the auxiliary database was re-installed and the database schema does not exist, and the auxiliary database schema was successfully re-created by the server. |
|
ResourceExhausted |
value=12926 |
package=ldp |
This alarm is raised when CPM or data path resource required for FEC resolution is exhausted. The system may not be able to accept new request from peers once this happens. Appropriate configuration changes in LDP may be required. |
|
SubVlanStatsReachedMaximum |
value=12942 |
package=netw |
[CAUSE] This alarm is raised when the number of Subscriber VLAN (S-VLAN) statistics entries is at its maximum value. [EFFECT] For any additional subscriber traffic flows, no new entry will be created, and no such statistics will be available. [RECOVERY] No recovery required. |
|
SSLKeystoreCertificateExpiry |
value=12945 |
package=server |
This alarm is raised when the NFM-P SSL Keystore certificate will expire. |
|
SwQueueThresholdExceeded |
value=12946 |
package=sw |
The alarm is raised when the SW queue size exceeds the allowed maximum. |
|
IPMacFilterEgrNearFull |
value=12999 |
package=equipment |
The alarm is raised when an egress IPv4 or MAC ACL Filter policies are near full utilization on an FP. |
|
IPMacFilterEgrOverload |
value=13000 |
package=equipment |
The alarm is raised when an egress IPv4 or MAC ACL Filter policy is in overload on an FP. |
|
IPMacFilterIngNearFull |
value=13001 |
package=equipment |
The alarm is raised when an ingress IPv4 or MAC ACL Filter policies are near full utilization on an FP. |
|
IPMacFilterIngOverload |
value=13002 |
package=equipment |
The alarm is raised when an ingress IPv4 or MAC ACL Filter policy is in overload on an FP. |
|
IPv6FilterEgrNearFull |
value=13003 |
package=equipment |
The alarm is raised when an egress IPv6 ACL Filter policies are near full utilization on an FP. |
|
IPv6FilterEgrOverload |
value=13004 |
package=equipment |
The alarm is raised when an egress IPv6 ACL Filter policy is in overload on an FP. |
|
IPv6FilterIngNearFull |
value=13005 |
package=equipment |
The alarm is raised when an ingress IPv6 ACL Filter policies are near full utilization on an FP. |
|
IPv6FilterIngOverload |
value=13006 |
package=equipment |
The alarm is raised when an ingress IPv6 ACL Filter policy is in overload on a FP. |
|
PcieError |
value=13007 |
package=equipment |
This alarm is raised when there is problem with PCIE Bus Correctable Error. |
|
SyncEReferenceLossOfSignal |
value=13008 |
package=equipment |
The alarm is raised on the Standby CPM when the SyncE reference on an NE is not qualified due to Loss of Signal. |
|
SyncEReferenceLossOfSignal |
value=13008 |
package=sonet |
The alarm is raised when the SyncE reference on an NE is not qualified due to Loss of Signal. |
|
SyncEReferenceOutOfFrequency |
value=13009 |
package=equipment |
The alarm is raised on the Standby CPM when the SyncE Reference on an NE is not qualified due to Out of frequency. |
|
SyncEReferenceOutOfFrequency |
value=13009 |
package=sonet |
The alarm is raised when the SyncE Reference on an NE is not qualified due to Out of frequency. |
|
SyncEReferenceOutOfPollInRange |
value=13010 |
package=sonet |
The alarm is raised when the SyncE Reference on an NE is not qualified state due to Out of poll in range. |
|
SyncEReferenceOutOfPollInRange |
value=13010 |
package=equipment |
The alarm is raised on the Standby CPM when the SyncE Reference on an NE is not qualified state due to Out of poll in range. |
|
HsmKeyGenFailed |
value=13011 |
package=hsm |
The alarm is raised when NFM-P failed to generate a Key from the HSM. |
|
HsmKeyRetrieveFailed |
value=13012 |
package=hsm |
The alarm is raised when NFM-P failed to retrieve a Key from the HSM. |
|
IPSecDynamicTunnelProtocolFailed |
value=13013 |
package=ipsec |
The alarm is raised whenever there is abnormal event from protocol perspective to the dynamic tunnel (remote-user), with the message 'One or multiple remote user(s) under the gateway failed'. These abnormal events don't always necessarily cause the tunnel to change its operational state or to be removed. Only one of this alarm can be raised per IPSecGateway instance. If there are protocol failures for multiple remote users, the 'Number of Occurrences' will be increased to indicates how many times of this alarm is raised. The number also counts the failures for multiple retries. |
|
IPSecTunnelProtocolFailed |
value=13014 |
package=ipsec |
The alarm is raised whenever there is abnormal event from protocol perspective to the tunnel, which is indicated by the 'reasonFailed' (e.g., dpd-timeout, or no-proposal-chosen during rekey, etc). These abnormal events don't always necessarily cause the tunnel to change its operational state or to be removed (for dynamic tunnel). Due to above, the alarm can be cleared by:
-
the tunnel's operational state changed from down to up, if operational down is caused by the protocol failing
-
the user manually clear it
|
|
IPSecTunnelProtocolFailed |
value=13014 |
package=rtr |
The alarm is raised whenever there is abnormal event from protocol perspective to the tunnel, which is indicated by the 'reasonFailed' (e.g., dpd-timeout, or no-proposal-chosen during rekey, etc). These abnormal events don't always necessarily cause the tunnel to change its operational state or to be removed (for dynamic tunnel). Due to above, the alarm can be cleared by:
-
the tunnel's operational state changed from down to up, if operational down is caused by the protocol failing
-
the user manually clear it
|
|
MkaSessionDown |
value=13016 |
package=anysec |
The alarm is raised when NFM-P detects that the MKA Session is operationally down. The alarm will be cleared if the MKA session is operationally up. |
|
MkaSessionDown |
value=13016 |
package=macsec |
The alarm is raised when NFM-P detects that the MKA Session is operationally down. This alarm helps to remind the user to check the admin state of Macsec interface and physical port. The alarm will be cleared if the MKA session is operationally up. |
|
UnknownWLANGWKeyGroupIdDetected |
value=13017 |
package=netw |
The alarm is raised when a Key Group Id configured on an WLAN Gateway was not configured by NGE manager. |
|
UnknownWLANGWKeyGroupIdDetected |
value=13017 |
package=wlangw |
The alarm is raised when a Key Group Id configured on an WLAN Gateway was not configured by NGE manager. |
|
FmSubscriptionFailed |
value=13018 |
package=nfv |
The alarm is raised when NFMP is unable to create FM subscription in CBAM |
|
NgeWlanGwDeleted |
value=13024 |
package=nge |
The alarm is raised when a NGE WLAN Gateway Binding is deleted on the site from CLI. |
|
PWDisableEncryptionFailed |
value=13025 |
package=nge |
The alarm is raised when disabling encryption fails on a site. |
|
PWEncryptionConfigMismatch |
value=13026 |
package=nge |
The alarm is raised when a Key Group Id mismatch is detected on a site. |
|
PWEncryptionFailed |
value=13027 |
package=nge |
The alarm is raised when enabling encryption fails on a site. |
|
WlanGwDisableEncryptionFailed |
value=13028 |
package=nge |
The alarm is raised when disabling WLAN Gateway encryption fails on a site. |
|
WlanGwEncryptionConfigMismatch |
value=13029 |
package=nge |
The alarm is raised when a WLAN Gateway Key Group Id mismatch is detected on a site. |
|
WlanGwEncryptionFailed |
value=13030 |
package=nge |
The alarm is raised when enabling WLAN Gateway encryption fails on a site. |
|
EgrAggRateLimitLow |
value=13033 |
package=ressubscr |
The alarm is raised when the system has received a request to reduce the egress aggregate rate below the minimum reserved bandwidth (and it has set the egress aggregate rate to the minimum reserved bandwidth). |
|
SyncENotQualified |
value=13034 |
package=sonet |
The alarm is raised when SyncE on an NE is not in the Qualified state. |
|
SyncEQualityLevelChangedAlarm |
value=13035 |
package=sonet |
The alarm is raised when there is a change of the received quality level on the SyncE. |
|
InvalidSDPFarEndAssocNGEWlanGwDetected |
value=13036 |
package=svt |
The alarm is raised when SDP's far-end address modification lays in the situation that the SDP is already in NGE regular SDP and the new address is associated to a WLAN Gateway in NGE. This SDP is already in NGE regular SDPs and the new address is associated to a WLAN Gateway in NGE. In order to add the SDP with new address to NGE that is associated to a new NGE WLAN Gateway, the SDP in NGE should be deleted. Then, the far-end address need be deleted and then change it to the new address that is associated to a WLAN Gateway from CLI . An alternative way is to delete the SDP and create a new SDP with far-end address associated to an NGE WLAN Gateway. |
|
NgeNotSupported |
value=13037 |
package=svt |
The alarm is raised on a local PwTemplate when its global policy is added to NGE Key Group and this local PwTemplate is created on a site which is not applicable to NGE encryption. It will be cleared if the PwTemplate is removed from NGE. |
|
NgeServiceLimitExceeded |
value=13038 |
package=svt |
The alarm is raised when the number of applied services exceeds the NGE limit. It will be cleared if the number of applied service is reduced to or less than the limit. |
|
UnknownPWKeyGroupIdDetected |
value=13039 |
package=svt |
The alarm is raised when a Key Group Id is configured on an PW Template which was not configured by NGE manager. It will be cleared when the Key Group Id is set to 0. |
|
InvalidNGEWlanGwAddress |
value=13040 |
package=wlangw |
The alarm is raised when the WLAN Gateway of this newly added Gateway address configured in NGE Manager is detected as an invalid Gateway address. Case 1: This Gateway address is duplicated with a WLAN Gateway address in NGE, a System IP address or a Layer 3 Router Interface IP address of managed nodes. Case 2: A SDP with far-end address equals to this WLAN Gateway address, but the SDP is already in NGE. This alarm is cleared once this WLAN Gateway address was deleted. |
|
SystemMgmtInterfaceModeChanged |
value=13041 |
package=netw |
The alarm is raised when NFM-P detects a change in the system management interface mode. |
|
SSLClientKeystoreCertificateExpired |
value=13042 |
package=server |
The alarm is raised when the NSP Client (internal) SSL Keystore certificate for NFM-P has expired. |
|
SSLClientKeystoreCertificateExpiring |
value=13043 |
package=server |
This alarm is raised when the NSP Client (internal) SSL Keystore certificate is expiring soon. |
|
SSLClientKeystoreCertificateExpiry |
value=13044 |
package=server |
This alarm is raised when the NSP Client (internal) SSL Keystore certificate will expire. |
|
HsmKeyDeleteFailed |
value=13051 |
package=hsm |
The alarm is raised when NFM-P failed to delete a Key from the HSM. |
|
NatVappDetectsLoadSharingError |
value=13058 |
package=nat |
The alarm is raised when node is sending periodically at most every 10 seconds while a Virtual NAT application detects that it is receiving packets erroneously, due to incorrect load-balancing by the ingress IOM. The MDA drops all incorrectly load-balanced traffic. [CAUSE] The ingress IOM hardware does not support a particular NAT function's load-balancing, for example an IOM-2 does not support deterministic NAT. [EFFECT] The Virtual NAT Application drops all incorrectly load-balanced traffic. [RECOVERY] Upgrade the ingress IOM, or change the configuration.' |
|
UnsupportedNsgVirtualSwitch |
value=13059 |
package=dctr |
The alarm is raised when discovered NSG virtual switch is 6.0 and above versions. |
|
DuplicateSeamlessBfdDiscriminator |
value=13061 |
package=bfd |
The alarm is raised when a duplicate seamless bfd discriminator value is found on two or more different NEs. |
|
IPMacCpmFilterOverload |
value=13062 |
package=equipment |
The alarm is raised when an IPv4 or MAC CPM Filter policy is in overload on an FP. |
|
IPMacQosIngOverload |
value=13063 |
package=equipment |
The alarm is raised when an ingress QoS policy is in overload on an FP due to its configured IPv4 or MAC criteria entries. |
|
IPQosEgrOverload |
value=13064 |
package=equipment |
The alarm is raised when an egress QoS policy is in overload on an FP due to its configured IPv4 criteria entries. |
|
IPv6CpmFilterOverload |
value=13065 |
package=equipment |
The alarm is raised when an IPv6 CPM Filter policy is in overload on an FP. |
|
IPv6QosEgrOverload |
value=13066 |
package=equipment |
The alarm is raised when an egress QoS policy is in overload on an FP due to its configured IPv6 criteria entries. |
|
IPv6QosIngOverload |
value=13067 |
package=equipment |
The alarm is raised when an ingress QoS policy is in overload on an FP due to its configured IPv6 criteria entries. |
|
ESAAdministrativelyDown |
value=13068 |
package=esa |
The alarm is raised when the ESA AdministrativelyDown. |
|
ESADown |
value=13069 |
package=esa |
The alarm is raised when the ESA is OperationallyDown. |
|
ESAFailure |
value=13070 |
package=esa |
The alarm is raised when any failure happens in ESA. |
|
ESAVMAdministrativelyDown |
value=13071 |
package=esa |
The alarm is raised when the ESA VM AdministrativelyDown. |
|
ESAVMDown |
value=13072 |
package=esa |
The alarm is raised when the ESA VM is OperationallyDown. |
|
ESAVMFailure |
value=13073 |
package=esa |
The alarm is raised when any failure happens in ESA VM. |
|
IsisCorruptedLSPDetected |
value=13075 |
package=isis |
The alarm is raised when it is found that an LSP that was stored in memory has become corrupted. The corresponding LSP will be dropped. |
|
VmMigratedAlarm |
value=13138 |
package=nfv |
The host ID of the VM has changed.VNF lifecycle management operations and functionalities may fail. |
|
VnfAdditionalLiveVMAlarm |
value=13139 |
package=nfv |
The virtualized network function (VNF) has additional, unaccounted, powered on virtual machines (VMs) and the VNF is managed by OpenStack Heat |
|
VnfHeatConnectivityAlarm |
value=13140 |
package=nfv |
CBAM cannot connect to the Heat API of the Openstack virtualized infrastructure manager (VIM) where the (VNF) is deployed. |
|
VnfHeatStackExistenceAlarm |
value=13141 |
package=nfv |
CBAM cannot find the Heat stack on which the (VNF) has been deployed and the VNF is managed by OpenStack Heat. |
|
VnfHostAbnormalStateAlarm |
value=13142 |
package=nfv |
CBAM detects that the host of a virtual machine (VM) of this (VNF) is in abnormal state. |
|
VnfKeystoneConnectivityAlarm |
value=13143 |
package=nfv |
CBAM is unable to connect to the Keystone API of the Openstack virtualized infrastructure manager (VIM) where the VNF is deployed. |
|
VnfMonitoringSuspendedAlarm |
value=13144 |
package=nfv |
The last lifecycle management (LCM) operation executed on the instantiated VNF was unsuccessful.The VNF may be in inconsistent state and other LCM operations and functionalities may fail. The monitoring for this VNF is suspended. |
|
VnfNovaConnectivityAlarm |
value=13145 |
package=nfv |
CBAM cannot connect to the Nova API of the Openstack virtualized infrastructure manager (VIM) where the (VNF) is deployed |
|
VnfResourceAbnormalStateAlarm |
value=13146 |
package=nfv |
The state of a virtual machine (VM) of a virtualized network function (VNF) is not ACTIVE/RUNNING on OpenStack or Powered on on vCloud |
|
VnfResourceMissingAlarm |
value=13147 |
package=nfv |
CBAM cannot find a virtual machine (VM) of the (VNF) on the virtualized infrastructure manager (VIM). |
|
VnfVCloudConnectivityAlarm |
value=13148 |
package=nfv |
The vCloud connectivity alarm is triggered when CBAM cannot connect to the API of the vCloud where this VNF is deployed. |
|
VnfcHostAbnormalStateAlarm |
value=13149 |
package=nfv |
CBAM detects that the host of the virtual machine (VM) corresponding to this component (VNF) is in abnormal state. |
|
VnfcResourceAbnormalStateAlarm |
value=13150 |
package=nfv |
The state of the virtual machine (VM) corresponding to this component is not ACTIVE/RUNNING on OpenStack or Powered on on vCloud |
|
VnfcResourceMissingAlarm |
value=13151 |
package=nfv |
CBAM cannot find the virtual machine (VM) corresponding to this Component on the virtualized infrastructure manager (VIM). |
|
VnfvROPSConnectivityAlarm |
value=13152 |
package=nfv |
CBAM cannot connect to the vROPS API specified in the VIM connection info parameters of the VNF. |
|
EquipmentCRCErrorEvent |
value=13153 |
package=equipment |
The alarm is raised when the queuing chip experiences an occurrence of CRC memory error. The alarm is raised against 7210 SAS X NEs. |
|
CRNGConditionalSelfTestFail |
value=13155 |
package=equipment |
The alarm is raised when the NFM-P receives a notification reporting the raise of the Conditional Random Number Generator (CRNG) Self test defect trap from an NE. |
|
CRNGConditionalSelfTestFail |
value=13155 |
package=radioequipment |
The alarm is raised when the NFM-P receives a notification reporting the raise of the Conditional Random Number Generator (CRNG) Self test defect trap from an NE. |
|
EquipmentMMUParityErrorEvent |
value=13156 |
package=equipment |
The alarm is raised when the queuing chip experiences an occurrence of MMU parity error. The alarm is raised against 7210 SAS Mxp NEs. |
|
FPGASoftError |
value=13157 |
package=equipment |
The alarm is raised when an SEU event detected on the hardware. |
|
HardDiskDriveRemoved |
value=13158 |
package=equipment |
This alarm is raised when Hard Disk Drive is removed |
|
HardwareEventInternalFrameLossDetected |
value=13159 |
package=equipment |
The alarm is raised when the internal frame loss event is detected on the hardware. |
|
HardwareEventMemoryErrorDetected |
value=13160 |
package=equipment |
The alarm is raised when the memory error event is detected on the hardware. |
|
HardwareEventSoftErrorDetected |
value=13161 |
package=equipment |
The alarm is raised when the soft error event detected on the hardware. |
|
IpsecPskMissing |
value=13162 |
package=radioequipment |
The alarm is raised when the NFM-P receives a notification reporting raise of the IPSec PSK (Pre Secret Key) missing defect trap from an NE. |
|
IpsecPskMissing |
value=13162 |
package=equipment |
The alarm is raised when the NFM-P receives a notification reporting raise of the IPSec PSK (Pre Secret Key) missing defect trap from an NE. |
|
IpsecTunnelSetupFailure |
value=13163 |
package=equipment |
The alarm is raised when the NFM-P receives a notification reporting the raise of the IPSec tunnel set-up failure defect trap from an NE. |
|
IpsecTunnelSetupFailure |
value=13163 |
package=radioequipment |
The alarm is raised when the NFM-P receives a notification reporting the raise of the IPSec tunnel set-up failure defect trap from an NE. |
|
SecureModeMismatch |
value=13164 |
package=equipment |
The alarm is raised when the NFM-P receives a notification reporting the raise of the Secure mode mismatch defect trap from an NE. |
|
SecureModeMismatch |
value=13164 |
package=radioequipment |
The alarm is raised when the NFM-P receives a notification reporting the raise of the Secure mode mismatch defect trap from an NE. |
|
SecureSelfTestFailure |
value=13165 |
package=radioequipment |
The alarm is raised when the NFM-P receives a notification reporting the raise of the secure self-test failure defect trap from an NE. |
|
SecureSelfTestFailure |
value=13165 |
package=equipment |
The alarm is raised when the NFM-P receives a notification reporting the raise of the secure self-test failure defect trap from an NE. |
|
UpdateIPSecKeysFail |
value=13166 |
package=equipment |
The alarm is raised when the NFM-P receives a notification reporting the raise of the Update of IP Sec Key Fail alarm trap from an NE. |
|
UpdateIPSecKeysFail |
value=13166 |
package=radioequipment |
The alarm is raised when the NFM-P receives a notification reporting the raise of the Update of IP Sec Key Fail alarm trap from an NE. |
|
ZeroizeIPSecKeysFail |
value=13167 |
package=equipment |
The alarm is raised when the NFM-P receives a notification reporting the raise of the Zeroize of the IP Sec Key Fail alarm trap from an NE. |
|
ZeroizeIPSecKeysFail |
value=13167 |
package=radioequipment |
The alarm is raised when the NFM-P receives a notification reporting the raise of the Zeroize of the IP Sec Key Fail alarm trap from an NE. |
|
IPsecEsaVmMemoryHigh |
value=13168 |
package=esa |
The alarm is generated when the ESA VM memory usage ratio has almost reached the maximum value. |
|
EthOAMMACStatusDefect |
value=13169 |
package=ethernetoam |
This alarm is raised to report (Ethernet OAM Continuity Check) Unexpected Mep. |
|
EthOAMRUnexpectedCcmConnectivity |
value=13170 |
package=ethernetoam |
This alarm is raised to report (Ethernet OAM Continuity Check) Unexpected CCM Connectivity. |
|
EthOAMUnexpectedMep |
value=13171 |
package=ethernetoam |
This alarm is raised to report (Ethernet OAM Continuity Check) Unexpected Mep. |
|
LogUploadFailure |
value=13181 |
package=netw |
The alarm is raised when the NFM-P receives a notification reporting the raise of the Log Upload Failure defect trap from an NE. |
|
NEConfigurationValueMistmach |
value=13182 |
package=netw |
The configuration of the Network Element is not compatible with NSP and must be changed on the NSP supported values. |
|
SWDLConditionalSelfTestFail |
value=13183 |
package=netw |
The alarm is raised when the NFM-P receives a notification reporting the raise of the Sw Download Conditional Self test defect trap from an NE. |
|
SWDLConditionalSelfTestFail |
value=13183 |
package=equipment |
The alarm is raised when the NFM-P receives a notification reporting the raise of the Sw Download Conditional Self test defect trap from an NE. |
|
VirtualChassisDegraded |
value=13184 |
package=netw |
The alarm is raised when the NFM-P detects one or more chassis in VC setup are shutdown. |
|
KeyGroupCreationDetected |
value=13185 |
package=nge |
The alarm is raised when Key Group are detected that were not created by NGE Manager. |
|
SecurityAssociationCreationDetected |
value=13186 |
package=nge |
The alarm is raised when Security Association is detected that were not created by NGE Manager. |
|
GnssNotQualified |
value=13195 |
package=sonet |
The alarm is raised when GNSS on an NE is not in the Qualified state. |
|
GnssQualityLevelChangedAlarm |
value=13196 |
package=sonet |
The alarm is raised when there is a change of the received quality level on the GNSS. |
|
GnssReferenceLossOfSignal |
value=13197 |
package=equipment |
The alarm is raised when the GNSS reference on an NE is not qualified due to Loss of Signal. |
|
GnssReferenceLossOfSignal |
value=13197 |
package=sonet |
The alarm is raised when the GNSS reference on an NE is not qualified due to Loss of Signal. |
|
GnssReferenceOutOfFrequency |
value=13198 |
package=equipment |
The alarm is raised when the GNSS Reference on an NE is not qualified due to Out of frequency. |
|
GnssReferenceOutOfFrequency |
value=13198 |
package=sonet |
The alarm is raised when the GNSS Reference on an NE is not qualified due to Out of frequency. |
|
GnssReferenceOutOfPollInRange |
value=13199 |
package=equipment |
The alarm is raised when the GNSS Reference on an NE is not qualified state due to Out of poll in range. |
|
GnssReferenceOutOfPollInRange |
value=13199 |
package=sonet |
The alarm is raised when the GNSS Reference on an NE is not qualified state due to Out of poll in range. |
|
MacsecDataPathReplayAttempt |
value=13201 |
package=macsec |
With MACsec replay protection, each encrypted packet is assigned a unique sequence number and the sequence is verified at the remote end. Frames transmitted through a service provider network are highly susceptible to reordering due to prioritization and load balancing mechanisms used within the network. This alarm is raised every 10 seconds if the counter for detected replay attempts is different from the last time this notification was raised. |
|
MkaReplayAttemptDiscovered |
value=13202 |
package=macsec |
With MACsec replay protection, each encrypted packet is assigned a unique sequence number and the sequence is verified at the remote end. Frames transmitted through a service provider network are highly susceptible to reordering due to prioritization and load balancing mechanisms used within the network. The alarm is raised when the replay packet counter increments is discovered on the node. |
|
HPiLO2PowerThresholdTrap |
value=13214 |
package=netw |
'This trap notifies user of a power threshold breach Power threshold exceeded.' |
|
HPiLO3FltTolFanDegraded |
value=13215 |
package=netw |
'The Fault Tolerant Fan condition has been set to degraded for the specified chassis and fan.' |
|
HPiLO3FltTolFanFailed |
value=13216 |
package=netw |
'The Fault Tolerant Fan condition has been set to failed for the specified chassis and fan.' |
|
HPiLO3FltTolPowerSupplyRemoved |
value=13217 |
package=netw |
'A Fault Tolerant Power Supply has been removed from the specified chassis and bay location' |
|
HPiLO3TemperatureDegraded |
value=13218 |
package=netw |
'The temperature status has been set to degraded in the specified chassis and location' |
|
HPiLO3TemperatureFailed |
value=13219 |
package=netw |
'The system will be shutdown due to this condition' |
|
HPiLO5CorrMemReplaceMemModule |
value=13220 |
package=netw |
'The system will be shutdown due to this condition' |
|
HPiLOCTMemoryLogDisabled |
value=13221 |
package=netw |
'The frequency of errors is so high that the error tracking logic has been temporarily disabled. The cpqHeCorrMemLogStatus variable indicated the current tracking status.' |
|
HPiLOCpuStatusChange |
value=13222 |
package=netw |
'This trap is sent when CPU status changed. CPU can be brought down to Stop state and removed from O.S Active set or Brought back to Running state and made member of O.S Active set.' |
|
HPiLOFirmwareValidationScanFailed |
value=13223 |
package=netw |
'The firmware integrity scan or boot time validation detected an anomaly that requires the firmware to be updated.' |
|
HPiLOFltTolPowerSupplyDegraded |
value=13224 |
package=netw |
'The fault tolerant power supply condition has been set back to the OK state for the specified chassis and bay location.' |
|
HPiLOGenericTrap |
value=13225 |
package=netw |
'This trap notifies user of a power threshold breach Power threshold exceeded.' |
|
HPiLOInterlockFailureError |
value=13226 |
package=netw |
'This trap signifies a device missing or improperly seated on the system board' |
|
HPiLONVMeSecureEraseFailed |
value=13227 |
package=netw |
'Secure Erase of NVMe drive has failed' |
|
HPiLONvdimmConfigurationError |
value=13228 |
package=netw |
'One or more NVDIMM Configuration errors occurred.Details of the NVDIMM Configuration error messages can be found in Integrated Management Log' |
|
HPiLONvdimmControllerFirmwareError |
value=13229 |
package=netw |
'NVDIMM Error - Controller Firmware Error. The controller firmware has been corrupted. The OS will not use the NVDIMM' |
|
HPiLONvdimmErrorInterleaveOn |
value=13230 |
package=netw |
'NVDIMM Error - Controller Firmware Error. The controller firmware has been corrupted. The OS will not use the NVDIMM' |
|
HPiLONvdimmInterleaveOff |
value=13231 |
package=netw |
'NVDIMM Error - Controller Firmware Error. The controller firmware has been corrupted. The OS will not use the NVDIMM' |
|
HPiLONvdimmPersistantMemoryAddressError |
value=13232 |
package=netw |
'Persistent Memory Address Range Scrub has detected an error' |
|
HPiLONvdimmUncorrectableMemoryError |
value=13233 |
package=netw |
'NVDIMM Error -Uncorrectable Memory Error - This NVDIMM will not be available to the operating system' |
|
HPiLOPCIeDiskConditionChange |
value=13234 |
package=netw |
' change in condition of PCIe disk has been detected. The current PCIe disk condition is indicated in the cpqSePCIeDiskCondition variable' |
|
HPiLOPCIeDiskTemperatureFailed |
value=13235 |
package=netw |
'This trap is sent when he temperature of the disk has crossed the upper critical threshold' |
|
HPiLOPCIeDiskWearStatusChange |
value=13236 |
package=netw |
'This trap signifies that the agent has detected a change in the PCIe Disk wear status. The variable cpqSePCIeDiskWearStatus indicates the current wear status' |
|
HPiLOPciResetFail |
value=13237 |
package=netw |
'System is unable to perform a reset on the PCI controller in slot' |
|
HPiLOPcieTrainingFailed |
value=13238 |
package=netw |
'This trap is sent when a PCI Express slot failed to train' |
|
HPiLOPowerFuseDegraded |
value=13239 |
package=netw |
'A degraded power event has been detected and the server system board should be replaced' |
|
HPiLOPowerProtectionFault |
value=13240 |
package=netw |
'System Board Power Protection Fault.' |
|
HPiLOSelfTestError |
value=13241 |
package=netw |
'Remote Insight/ Integrated Lights-Out Self Test Error.' |
|
HPiLOServerPowerOnFailure |
value=13242 |
package=netw |
'Remote Insight/ Integrated Lights-Out Self Test Error.' |
|
HPiLOSysPwrAllocationNotOptimized |
value=13243 |
package=netw |
'The temperature status has been set to degraded in the specified chassis and location' |
|
HPiLOSysPwrOnDenied |
value=13244 |
package=netw |
'One of the Field Replacement Units(FRU) is not allowing the system to power on' |
|
TelemetryCollectionDeadlineMissed |
value=13245 |
package=netw |
Not all telemetry data was collected within the expected collection interval. This could be caused by one or more network elements being unavailable or experiencing processing delays, or by the system being overloaded by excessive telemetry data processing demands. |
|
TelemetryCollectionProblem |
value=13246 |
package=netw |
There was a problem collecting telemetry data from one or more network elements. |
|
switchoverOnSecondaryNode |
value=13247 |
package=netw |
The alarm is raised when the active node becomes the secondary node |
|
EquipmentAirflowDirMismatch |
value=13282 |
package=equipment |
The alarm is raised when the direction of all the fans and powersupplies in the chassis are not in same direction. |
|
PowerSupplyMismatch |
value=13283 |
package=equipment |
The alarm is raised when the equipped power supplies are not of same type. |
|
PowerSupplyUnsupported |
value=13284 |
package=equipment |
The alarm is raised when the equipped power supply is not supported by chassis |
|
interferenceDetected |
value=13297 |
package=radioequipment |
The alarm is raised when interference is detected. |
|
interferenceDetected |
value=13297 |
package=mwa |
The alarm is raised when interference is detected. |
|
ReplicationSegmentCpmDataPathResourceExhausted |
value=13298 |
package=rtr |
This alarm is generated when a CPM or data path resource specified by the Resource Type cannot be allocated for the Segment Routing Replication Segment. The Replication Segment will be operationally down. Configuration change may be required. May be cleared while retrying for the exhausted resource. |
|
ReplicationSegmentIncomingLabelFailure |
value=13299 |
package=rtr |
This alarm is generated when a failure is detected for the Replication Segment Incoming Label. Programming of the Replication Segment will fail. Configuration change, using a different Incoming Label. |
|
SegmentRoutingTreeIdAllocationFailure |
value=13300 |
package=rtr |
This alarm is generated when Segment Routing Tree resource cannot be allocated. System may not accept new Replication Segment configuration. Configuration change may be required. May also be cleared while retrying for the resource. |
|
SegmentRoutingTreeLabelRangeExhausted |
value=13301 |
package=rtr |
This alarm is generated when the Reserved Label range for segment routing tree is exhausted. System may not accept new Replication Segment configuration with Pop and Swap operation. Configuration change may be required. |
|
CpmProtExcdSapEcm |
value=13302 |
package=service |
The alarm is raised when the Eth-CFM packet stream arrives at a local SAP at a rate which exceeds the configured Eth-CFM rate limit for the stream. |
|
MediationSecurityViolation |
value=13303 |
package=sitesec |
The alarm is raised when NFMP is operating in Secure Mode and configuration violates the restrictions of that mode (eg SSH Version includes SSHv1). |
|
PasswordSecurityViolation |
value=13304 |
package=sitesec |
The alarm is raised when NFMP is operating in Secure Mode and configuration violates the restrictions of that mode (eg Minimum Length value is too low). |
|
TimingReferenceOneQualityLevelChanged |
value=13305 |
package=sonet |
The alarm is raised when there is a change of the received quality level on the Timing Reference One. |
|
TimingReferenceTwoQualityLevelChanged |
value=13306 |
package=sonet |
The alarm is raised when there is a change of the received quality level on the Timing Reference Two. |
|
ThresholdCrossedAlarm |
value=13307 |
package=sas |
The alarm is raised when node sends TCA trap. |
|
AUIResetAlarm |
value=13308 |
package=equipment |
The alarm is raised in case of AUI Reset on c10-10g connector breakouts. |
|
HardwareEventDataPathLinkErrorDetected |
value=13311 |
package=equipment |
The alarm is raised when the data path link error event is detected on the hardware. |
|
IOMRsrcEventOverflow |
value=13312 |
package=equipment |
The IOMRsrcEventOverflow alarm is generated when IOMRsrcUsageHighLimitReached, IOMRsrcUsageExhausted,IOMRsrcUsageRecovered, IOMRsrcUserOversubscribed or IOMRsrcUserOversubscribedClr occur more than 200 times because of resource usage fluctuation. The IOM raises the final trap to indicate overflow and stops logging traps. |
|
IOMRsrcUsageLimit |
value=13313 |
package=equipment |
The IOMRsrcUsageLimit alarm is raised when the utilization of the IOM resource based on the threshold \n a. IOMRsrcUsageHighLimitReached : IOMResourceType reaches or exceeds 90%. \n b. IOMRsrcUsageExhausted : IOMResourceType is exhausted. |
|
IOMRsrcUserOverSubscribed |
value=13314 |
package=equipment |
The IOMRsrcUserOverSubscribed alarm is generated when the IOM resource of type IOMResourceType has been exhausted for user IOMResourceUserType. |
|
MissingDiversityAlignConf |
value=13315 |
package=equipment |
The alarm is raised when combiner is enabled and not having a success state in calibration procedure |
|
ShelfFlashAboveThreshold |
value=13316 |
package=equipment |
The alarm is raised when shelf Flash usage exceeds the threshold value. |
|
AutoESIConflict |
value=13318 |
package=svr |
The alarm is raised when the Auto-ESI type-1 ESI generated from CE LACP PDUs for an ES conflicts with one already associated to another ES. |
|
BgpEvpnDuplicateRouteDistinguisher |
value=13319 |
package=vprn |
The alarm is raised if a duplicate Route Distinguisher is configured on two different NE's on different VPRN Service. |
|
BgpEvpnDuplicateVrfTarget |
value=13320 |
package=vprn |
The alarm is raised when the NFM-P detects a duplicate VRF target in a VPRN. The alarm information includes the VRF policy ID and type, and information about the service site. |
|
ACMDegrade |
value=13321 |
package=radioequipment |
The alarm is raised when the NFM-P receives a notification reporting the raise of the ACM Degrade alarm trap from an NE. |
|
ACMDegrade |
value=13321 |
package=equipment |
The alarm is raised when the NFM-P receives a notification reporting the raise of the ACM Degrade alarm trap from an NE. |
|
AutomaticTxMute |
value=13322 |
package=equipment |
The alarm is raised when the radio is automatically muted by the node. |
|
AutomaticTxMute |
value=13322 |
package=radioequipment |
The alarm is raised when the radio is automatically muted by the node. |
|
AirFrameTest |
value=13329 |
package=equipment |
This alarm is raised to check destination system can receive it. |
|
DuplicateFlexAlgoNodeIPv6SegmentId |
value=13330 |
package=isis |
The alarm is raised when a duplicate node segment id value is found on two or more different NEs. |
|
DuplicateFlexAlgoNodeSegmentId |
value=13331 |
package=ospf |
The alarm is raised when a duplicate node segment id value is found on two or more different NEs. |
|
DuplicateFlexAlgoNodeSegmentId |
value=13331 |
package=isis |
The alarm is raised when a duplicate node segment id value is found on two or more different NEs. |
|
MPLSManualSwitchPathDegradedStateTrue |
value=13336 |
package=mpls |
This alarm is raised to indicate that path degraded due to manual switch |
|
CPMRedundancyNotAvailable |
value=13338 |
package=netw |
This alarm indicates that one of the CPM has failed or removed and CPM redundancy is no more available. |
|
EndpointActiveMultipathChanged |
value=13340 |
package=cpipe |
This alarm is raised if aluSapCemStatsActiveMultipathStateChgCnt increased since the last poll. |
|
MplsManualSwitchPathFailed |
value=13341 |
package=mpls |
This alarm is raised to indicate that manual switch has failed with reason. |
|
CellularRSSIAlarm |
value=13344 |
package=equipment |
The alarm is generated when cellular signal strength is less than the RSSI threshold configured value |
|
FPResOversubscribed |
value=13345 |
package=equipment |
The FPResOversubscribed alarm is generated when one or more of the FP resources have been oversubscribed. |
|
ESAHWFanFailed |
value=13346 |
package=esa |
The alarm is raised when ESA's fault-tolerant fan condition was set to Failed. |
|
ESAHWFanPerformanceDegraded |
value=13348 |
package=esa |
The alarm is raised when one or more of the ESA server's fans are operating at reduced capacity. |
|
ESAHWPowerSupply1Degraded |
value=13350 |
package=esa |
The alarm is raised when the ESA server's power supply 1 is operating at reduced capacity. |
|
ESAHWPowerSupply1Failed |
value=13351 |
package=esa |
The alarm is raised when the ESA server's power supply 1 is not operational. |
|
ESAHWPowerSupply2Degraded |
value=13352 |
package=esa |
The alarm is raised when the ESA server's power supply 2 is operating at reduced capacity. |
|
ESAHWPowerSupply2Failed |
value=13353 |
package=esa |
The alarm is raised when the ESA server's power supply 2 is not operational. |
|
ESAHWPowerSupplyMismatch |
value=13354 |
package=esa |
The alarm is raised when power supply elements equipped to the ESA are not all of the same type. |
|
ESAHWStatusCritical |
value=13357 |
package=esa |
The alarm is raised when one or more hardware components of the ESA server are non-operational. |
|
ESAHWStatusDegraded |
value=13358 |
package=esa |
The alarm is raised when one or more hardware components of the ESA server are operating at reduced capacity. |
|
ESAHWTemperatureAlarm |
value=13359 |
package=esa |
The alarm is raised when the ESA's temperature status was set to Degraded, and its temperature is outside the normal operating range. |
|
ESAHWTemperatureAlert |
value=13360 |
package=esa |
The alarm is raised when the ESA's temperature status was set to Degraded, and its temperature is outside the normal operating range. |
|
connectNotAttemptedOnService |
value=13370 |
package=mpr |
The alarm is raised when connect operation is not yet attempted on the service which is deployed. |
|
HPiLOAccelStatusChange |
value=13371 |
package=netw |
'This trap signifies that the agent has detected a change in the status of a cache module board. ' |
|
HPiLOCntlrStatusChange |
value=13372 |
package=netw |
'This trap signifies that the agent has detected a change in the status of a drive array controller.' |
|
HPiLOFltTolPowerSupplyFailed |
value=13373 |
package=netw |
'The fault tolerant power supply condition has been set to failed for the specified chassis and bay location.' |
|
HPiLOLogDrvStatusChange |
value=13374 |
package=netw |
'This trap signifies that the agent has detected a change in the status of a drive array logical drive.' |
|
HPiLOOverallSecStatusChange |
value=13375 |
package=netw |
' The alarm is raised when Overall Security Status is changed' |
|
HPiLOPhyDrvSSDWearStatusChange |
value=13376 |
package=netw |
'This trap signifies that the agent has detected a change in the SSD wear status of a drive array physical drive.' |
|
HPiLOPhyDrvStatusChange |
value=13377 |
package=netw |
'This trap signifies that the agent has detected a change in the status of a drive array physical drive. ' |
|
HPiLOSasPhyDrvSSDWearStatusChange |
value=13378 |
package=netw |
' This trap signifies that the agent has detected a change in the SSD wear status of a SAS or SATA physical drive.' |
|
HPiLOSasPhyDrvStatusChange |
value=13379 |
package=netw |
'The alarm is raised when the agent has detected a change in the status of a SAS or SATA physical drive.' |
|
HPiLOSpareStatusChange |
value=13380 |
package=netw |
'This trap signifies that the agent has detected a change in the status of a drive array spare drive' |
|
HPiLOSysBatteryFailed |
value=13381 |
package=netw |
' The alarm is raised when the system battery has either failed or met a predictive failure condition for the specified chassis and index location.' |
|
ESAHWFanBankNonRedundant |
value=13382 |
package=esa |
The alarm is raised when the ESA server has reduced fan redundancy |
|
ESAHWFanBankRedundancyFailed |
value=13383 |
package=esa |
The alarm is raised when the ESA server's fan redundancy is non-operational. |
|
ESAHWPowerSupplyBankNonRedundant |
value=13384 |
package=esa |
The alarm is raised when one or more of the ESA server's power supply's are operating at reduced capacity. |
|
ESAHWPowerSupplyBankRedundancyFailed |
value=13385 |
package=esa |
The alarm is raised when one or more of the ESA server's power supply's equipped to the ESA are not all of the same type. |
|
IPSecTunnelFailure |
value=13386 |
package=ipsec |
The alarm is raised when there is an authentication failure to bring up an IPsec tunnel. |
|
LLDPMEDTopologyChangeDetected |
value=13402 |
package=equipment |
The alarm is raised when the local device sensing a change in the topology that indicates that a new remote device attached to a local port, or a remote device disconnected or moved from one port to another. |
|
LossOfContinuity |
value=13403 |
package=equipment |
The alarm is raised when no IDLE packets are received by reception side for 5 periods of 10ms. |
|
PortSfpStatusFailure |
value=13404 |
package=equipment |
This alarm is raised when the sfpStatus of the port is other than not-equipped /operational |
|
SyncE2ReferenceLossOfSignal |
value=13405 |
package=sonet |
The alarm is raised when the SyncE2 reference on an NE is not qualified due to Loss of Signal. |
|
SyncE2ReferenceLossOfSignal |
value=13405 |
package=equipment |
The alarm is raised on the Standby CPM when the SyncE2 reference on an NE is not qualified due to Loss of Signal. |
|
SyncE2ReferenceOutOfFrequency |
value=13406 |
package=equipment |
The alarm is raised on the Standby CPM when the SyncE2 Reference on an NE is not qualified due to Out of frequency. |
|
SyncE2ReferenceOutOfFrequency |
value=13406 |
package=sonet |
The alarm is raised when the SyncE Reference on an NE is not qualified due to Out of frequency. |
|
SyncE2ReferenceOutOfPollInRange |
value=13407 |
package=equipment |
The alarm is raised on the Standby CPM when the SyncE2 Reference on an NE is not qualified state due to Out of poll in range. |
|
SyncE2ReferenceOutOfPollInRange |
value=13407 |
package=sonet |
The alarm is raised when the SyncE2 Reference on an NE is not qualified state due to Out of poll in range. |
|
ModemDown |
value=13409 |
package=netw |
The alarm is raised when the NFM-P Data model and node is mismatched. |
|
RSLDeviationThresholdCrossed |
value=13410 |
package=netw |
The alarm is raised when RSL deviation occurs more than the times defined in system preference. |
|
SyncE2NotQualified |
value=13411 |
package=sonet |
The alarm is raised when SyncE2 on an NE is not in the Qualified state. |
|
SyncE2QualityLevelChangedAlarm |
value=13412 |
package=sonet |
The alarm is raised when there is a change of the received quality level on the SyncE. |
|
EquipmentCardMissing |
value=13420 |
package=equipment |
The alarm is raised when the card configuration is present but the card is not detected in the slot. |
|
PSUFanFailure |
value=13421 |
package=equipment |
This alarm is generated when a fan within a particular power-supply has ceased to function normally. |
|
UpdateSecuritySignedUEFI |
value=13422 |
package=equipment |
This alarm is raised when a CPM element reboots with UEFI variables which are out of date with the software image that CPM is configured to boot into. |
|
VCStackPort1Down |
value=13423 |
package=equipment |
This alarm is raised when the Port connected to when a VC Stack port status changes. |
|
VCStackPort2Down |
value=13424 |
package=equipment |
This alarm is raised when the Port connected to when a VC Stack port status changes. |
|
PortIngressCIROverloadAlarm |
value=13425 |
package=ethernetequipment |
This alarm is raised when the associated port rate limiter Ingress CIR is less than sum of all VLAN port rate limiter Ingress CIR OR when sum of all VLAN port rate limiter Ingress CIR is more than port interface speed (when Eth Port Rate limiter is not configured). |
|
IsisDatabaseOverload |
value=13426 |
package=isis |
The alarm is raised when the system enters the Overload state. |
|
PtpPeerNoRxTimestamping |
value=13427 |
package=ptp |
This alarm is generated on initial exchange of PTP event messages with a peer and whenever the location of the timestamping of the event messages received from the peer changes. |
|
PtpPeerNoTxTimestamping |
value=13428 |
package=ptp |
This alarm is generated on initial exchange of PTP event messages with a peer and whenever the location of the timestamping of the event messages transmitted to the peer changes |
|
ProbeFailedAlarm4 |
value=13429 |
package=rtr |
The alarm is raised when an OAM test on the object reports a probe failure. |
|
TestFailedAlarm4 |
value=13430 |
package=rtr |
The alarm is raised when an OAM test on the object fails. |
|
TestThresholdExceededAlarm4 |
value=13431 |
package=rtr |
The alarm is raised when an OAM test on the object reports that the test threshold has been exceeded. |
|
AutomaticDiscoveryFailed |
value=13432 |
package=adp |
The alarm is raised when the ADP process fails. |
|
InconsistentRxSciDetected |
value=13433 |
package=anysec |
The alarm is raised is generated when the peer sends an SCI that is not consistent with the local encryption SID label. |
|
CPMAFabricLinkDown |
value=13434 |
package=equipment |
The alarm is raised when a CPM-A fabric link is down on the corresponding NE. |
|
CPMAFabricLinkUp |
value=13435 |
package=equipment |
The alarm is raised when a CPM-A fabric link is up on the corresponding NE. |
|
CPMBFabricLinkDown |
value=13436 |
package=equipment |
The alarm is raised when a CPM-B fabric link is down on the corresponding NE. |
|
CPMBFabricLinkUp |
value=13437 |
package=equipment |
The alarm is raised when a CPM-B fabric link is up on the corresponding NE. |
|
ESAStolenTimeDetected |
value=13438 |
package=esa |
The alarm is raised when stolen time monitoring on the ESA detects periods of time that ESA-VMs are ready to run, but are unable to do so. |
|
CLA |
value=13439 |
package=equipment |
The alarm is raised when a radio interface CLA Failure is detected. |
|
PowerSavingActive |
value=13440 |
package=equipment |
The alarm is raised when the radio is put into Light Sleep or Deep Sleep(Power Saving is enabled). |
|
PowerSavingActive |
value=13440 |
package=radioequipment |
The alarm is raised when the radio is put into Light Sleep or Deep Sleep(Power Saving is enabled). |
|
MaintenanceModeAbnormalCondition |
value=13441 |
package=netw |
The alarm is raised when abnormal state resulted due to enabling Maintenance Mode. |