|
Properties |
|
decryptBytes |
Indicates the number of bytes decrypted by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
decryptBytesPeriodic |
Indicates the number of bytes decrypted by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
decryptPackets |
Indicates the number of packets decrypted by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
decryptPacketsPeriodic |
Indicates the number of packets decrypted by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
dropTooBigDfSetPackets |
Indicates the number of packets with DF bit set dropped in this Tunnel exceeding MTU size and
with clear tunnel DF bit not set.
type=UInt128
access=read-only
default=0
|
|
dropTooBigDfSetPacketsPeriodic |
Indicates the number of packets with DF bit set dropped in this Tunnel exceeding MTU size and
with clear tunnel DF bit not set.
type=UInt128
access=read-only
default=0
|
|
dynamicIPsecTunnels |
Indicates number of dynamic IPsec tunnels in use on the MDA.
type=long
access=read-only
default=0
rollover=false
|
|
dynamicIPsecTunnelsPeriodic |
Indicates number of dynamic IPsec tunnels in use on the MDA.
type=long
access=read-only
default=0
|
|
encryptBytes |
Indicates the number of bytes encrypted by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
encryptBytesPeriodic |
Indicates the number of bytes encrypted by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
encryptPackets |
Indicates the number of packets encrypted by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
encryptPacketsPeriodic |
Indicates the number of packets encrypted by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
fragmentTimeOutDrops |
Indicates the number of fragments dropped due to time-out by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
fragmentTimeOutDropsPeriodic |
Indicates the number of fragments dropped due to time-out by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
fragmentTotalDrops |
Indicates the number of total fragments dropped by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
fragmentTotalDropsPeriodic |
Indicates the number of total fragments dropped by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
greTnlRxBytes |
Indicates the number of bytes received by the GRE tunnel data path.
type=UInt128
access=read-only
default=0
|
|
greTnlRxBytesPeriodic |
Indicates the number of bytes received by the GRE tunnel data path.
type=UInt128
access=read-only
default=0
|
|
greTnlRxErrors |
Indicates the number of packets dropped while receiving by the GRE tunnel data path.
type=UInt128
access=read-only
default=0
|
|
greTnlRxErrorsPeriodic |
Indicates the number of packets dropped while receiving by the GRE tunnel data path.
type=UInt128
access=read-only
default=0
|
|
greTnlRxPkts |
Indicates the number of packets received by the GRE tunnel data path.
type=UInt128
access=read-only
default=0
|
|
greTnlRxPktsPeriodic |
Indicates the number of packets received by the GRE tunnel data path.
type=UInt128
access=read-only
default=0
|
|
greTnlTxBytes |
Indicates the number of bytes transmitted by the GRE tunnel data path.
type=UInt128
access=read-only
default=0
|
|
greTnlTxBytesPeriodic |
Indicates the number of bytes transmitted by the GRE tunnel data path.
type=UInt128
access=read-only
default=0
|
|
greTnlTxErrors |
Indicates the number of packets dropped while transmitting by the GRE tunnel data path.
type=UInt128
access=read-only
default=0
|
|
greTnlTxErrorsPeriodic |
Indicates the number of packets dropped while transmitting by the GRE tunnel data path.
type=UInt128
access=read-only
default=0
|
|
greTnlTxPkts |
Indicates the number of packets transmitted by the GRE tunnel data path.
type=UInt128
access=read-only
default=0
|
|
greTnlTxPktsPeriodic |
Indicates the number of packets transmitted by the GRE tunnel data path.
type=UInt128
access=read-only
default=0
|
|
inboundIPDropPackets |
Indicates the number of packets dropped before and during inbound (decryption) processing by
the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
inboundIPDropPacketsPeriodic |
Indicates the number of packets dropped before and during inbound (decryption) processing by
the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
inboundIPDstSrcMismatches |
Indicates the number of packets dropped before inbound (decryption) processing by
the IPsec data path due to the received packet's outer IP destination
or source address does not match the Tunnel's local or peer gateway address.
type=long
access=read-only
default=0
|
|
inboundIPDstSrcMismatchesPeriodic |
Indicates the number of packets dropped before inbound (decryption) processing by
the IPsec data path due to the received packet's outer IP destination
or source address does not match the Tunnel's local or peer gateway address.
type=long
access=read-only
default=0
|
|
inboundSaMisses |
Indicates the number of packets dropped before inbound (decryption) processing by the IPsec
data path due to no SA (security association) present.
type=UInt128
access=read-only
default=0
|
|
inboundSaMissesPeriodic |
Indicates the number of packets dropped before inbound (decryption) processing by the IPsec
data path due to no SA (security association) present.
type=UInt128
access=read-only
default=0
|
|
ipGreTunnels |
Indicates number of configured IP tunnels (with GRE headers) on the MDA.
type=long
access=read-only
default=0
rollover=false
|
|
ipGreTunnelsPeriodic |
Indicates number of configured IP tunnels (with GRE headers) on the MDA.
type=long
access=read-only
default=0
|
|
ipv4Tunnels |
Indicates number of configured IPv4 tunnels on the MDA.
type=long
access=read-only
default=0
rollover=false
|
|
ipv4TunnelsPeriodic |
Indicates number of configured IPv4 tunnels on the MDA.
type=long
access=read-only
default=0
|
|
l2tpv3TnlRxBytes |
Indicates the number of bytes received by the L2TPv3 tunnel data path.
type=UInt128
access=read-only
default=0
|
|
l2tpv3TnlRxBytesPeriodic |
Indicates the number of bytes received by the L2TPv3 tunnel data path.
type=UInt128
access=read-only
default=0
|
|
l2tpv3TnlRxErrors |
Indicates the number of packets dropped while receiving by the L2TPv3 tunnel data path.
type=UInt128
access=read-only
default=0
|
|
l2tpv3TnlRxErrorsPeriodic |
Indicates the number of packets dropped while receiving by the L2TPv3 tunnel data path.
type=UInt128
access=read-only
default=0
|
|
l2tpv3TnlRxPkts |
Indicates the number of packets received by the L2TPv3 tunnel data path.
type=UInt128
access=read-only
default=0
|
|
l2tpv3TnlRxPktsPeriodic |
Indicates the number of packets received by the L2TPv3 tunnel data path.
type=UInt128
access=read-only
default=0
|
|
l2tpv3TnlTxBytes |
Indicates the number of bytes transmitted by the L2TPv3 tunnel data path.
type=UInt128
access=read-only
default=0
|
|
l2tpv3TnlTxBytesPeriodic |
Indicates the number of bytes transmitted by the L2TPv3 tunnel data path.
type=UInt128
access=read-only
default=0
|
|
l2tpv3TnlTxErrors |
Indicates the number of packets dropped while transmitting by the L2TPv3 tunnel data path.
type=UInt128
access=read-only
default=0
|
|
l2tpv3TnlTxErrorsPeriodic |
Indicates the number of packets dropped while transmitting by the L2TPv3 tunnel data path.
type=UInt128
access=read-only
default=0
|
|
l2tpv3TnlTxPkts |
Indicates the number of packets transmitted by the L2TPv3 tunnel data path.
type=UInt128
access=read-only
default=0
|
|
l2tpv3TnlTxPktsPeriodic |
Indicates the number of packets transmitted by the L2TPv3 tunnel data path.
type=UInt128
access=read-only
default=0
|
|
l2tpv3Tunnels |
Indicates number of configured L2TPv3 tunnels on the MDA.
type=long
access=read-only
default=0
rollover=false
|
|
l2tpv3TunnelsPeriodic |
Indicates number of configured L2TPv3 tunnels on the MDA.
type=long
access=read-only
default=0
|
|
numberOfFragmentsReceived |
Indicates the number of fragments received by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
numberOfFragmentsReceivedPeriodic |
Indicates the number of fragments received by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
numberOfPktsReassembled |
Indicates the number of packets reassembled by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
numberOfPktsReassembledPeriodic |
Indicates the number of packets reassembled by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
outboundIPDropPackets |
Indicates the number of packets dropped before and during outbound (encryption) processing by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
outboundIPDropPacketsPeriodic |
Indicates the number of packets dropped before and during outbound (encryption) processing by the IPsec data path.
type=UInt128
access=read-only
default=0
|
|
outboundPolicyEntryMisses |
Indicates the number of packets dropped before outbound (encryption) processing by
the IPsec data path due to no matching Policy Entry.
type=long
access=read-only
default=0
|
|
outboundPolicyEntryMissesPeriodic |
Indicates the number of packets dropped before outbound (encryption) processing by
the IPsec data path due to no matching Policy Entry.
type=long
access=read-only
default=0
|
|
outboundSaMisses |
Indicates the number of packets dropped before outbound (encryption) processing by the IPsec
data path due to no SA (security association) present.
type=UInt128
access=read-only
default=0
|
|
outboundSaMissesPeriodic |
Indicates the number of packets dropped before outbound (encryption) processing by the IPsec
data path due to no SA (security association) present.
type=UInt128
access=read-only
default=0
|
|
staticIPsecTunnels |
Indicates number of configured static IPsec tunnels on the MDA.
type=long
access=read-only
default=0
rollover=false
|
|
staticIPsecTunnelsPeriodic |
Indicates number of configured static IPsec tunnels on the MDA.
type=long
access=read-only
default=0
|
|
transmitPacketErrors |
Indicates the number of packets transmit failures by the IPsec data path.
type=long
access=read-only
default=0
|
|
transmitPacketErrorsPeriodic |
Indicates the number of packets transmit failures by the IPsec data path.
type=long
access=read-only
default=0
|