anysec
AnySecPeer

Specifies information for one ANYsec encryption group peer. A peer of an encryption group identifies a remote LSP tunnel sending ANYsec encrypted traffic.



public class AnySecPeer

Stats:
anysec.ANYSecRxSCStats anysec.ANYSecTxSCStats anysec.AnySecPeerStats

Properties
administrativeState Specifies the Admin state of traffic going to this peer of the encryption group.

type=anysec.AdminState
default=down
Displayed(tab/group)=Administrative State

anysec.MkaSession-Set type=Children-Set
groupName

type=string
access=read-only

lastInconsistentRxSci Indicates the last inconsistent Rx SCI received from this peer.

type=string
access=read-only
Displayed(tab/group)=Last Inconsistent Rx SCI

operDownReason Indicates the reason for why the operational state is down for this peer. If the operational state is up, this will be set to a value of 'none'.

type=int
access=read-only
Displayed(tab/group)=Oper Down Reason
enums=
    0: none - None
    1: peerAdminDown - Peer Admin Down
    2: encryptGrpAdminDown - Encryption Group Admin Down
    3: termPolicyAdminDown - Termination Policy Admin Down
    4: caAdminDown - CA Admin Down
    5: mkaDown - MKA Down
    6: inconsistentRxSci - Inconsistent Rx SCI
    7: missingRxTunnel - Missing Rx Tunnel
    8: missingTxTunnel - Missing Tx Tunnel

operationalState Indicates the operational state of this peer.

type=netw.OperationalState
access=read-only
Displayed(tab/group)=Operational State

peerAddress Specifies the IPv4 or IPv6 address that uniquely identifies this peer of the encryption group.

type=InetAddress
access=read-create
default=0.0.0.0
Displayed(tab/group)=Address

peerAddressType Specifies the address type of peerAddress

type=rtr.InetAddressType
access=read-create
default=ipv4

peerEncryptionLabel Indicates the MPLS label that uniquely identifies the peer encryption group. This label allows for egress packets to be decrypted according to the MKA associated with this peer.

type=long
access=read-only
Displayed(tab/group)=Peer Encryption Label

receiveSecureChannelIdentifier Indicates the SCI for identifying the receiving SC.

type=string
access=read-only
Displayed(tab/group)=Receive SCI

siteId

type=string
access=read-only
default=

transmitSecureChannelIdentifier Indicates the Secure Channel Identifier (SCI) information for transmitting ANYsec packets. This is the same value as MkaSession.outboundSci.

type=string
access=read-only
Displayed(tab/group)=Transmit SCI

tunnelId Indicates the tunnel ID used by this peer.

type=long
access=read-only
Displayed(tab/group)=Tunnel Id

  
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed
 
Supported Network Elements
7750 SR Supported from 23.10.R1
  • Excluded chassis types: 7750 SR-2se, 7750-SRc12, 7750-SR12, 7750-SRc4, 7750-SR12e, 7750-SRa4, 7750-SRa8, 7750 SR-1e, 7750 SR-2e, 7750 SR-3e, 7750-SR1 Fixed CFM, 7750 SR-14s, 7750 SR-7s, 7750 SR-1s, 7750 SR-2s
Product Specifics
7705 SAR Gen 2 (all versions)
7750 SR (all versions)