| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| atmvci |
type=int default=0 minimum=0 maximum=65535 Displayed(tab/group)=ATM VCI (/Match Criteria - ATM) |
| destinationMacAddress |
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Destination MAC (/Match Criteria) |
| destinationMacAddressMask |
Specifies the mask that is associated with the Destination MAC parameter. The Destination MAC
address and the associated mask are used to specify a range of MAC addresses as the MAC match
criteria for mapping packets to a forwarding class and priority. Specify a mask for the Mask
parameter in the format xx-xx-xx-xx-xx-xx.
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Mask (/Match Criteria) |
| dot1pMask |
Specifies the 3-bit mask that is associated with the Dot1p parameter . The Dot1p value and the
associated mask are used to specify a range of dot1p values as the MAC match criterion for
mapping packets to a forwarding class and priority.
type=qos.Dot1pPriority default=priority_0 Displayed(tab/group)=Mask (/Match Criteria) |
| dot1pValue |
Specifies the dot1p value to be used as the MAC match criterion for mapping packets to a
forwarding class and priority. When a packet is marked with the value specified by the Dot1p
parameter, the packet is mapped to the forwarding class specified by the Forwarding Class
parameter and the priority specified by the Priority parameter.
type=qos.Dot1pPriority default=default Displayed(tab/group)=Dot1p (/Match Criteria) |
| dsap |
Specifies an Ethernet 802.2 LLC DSAP value or range as the match criterion. You must enable the
parameter to specify a value. A value of -1 means that filtering for this parameter is disabled.
This parameter is configurable when the Frame Type parameter is set to e802dot2LLC.
type=int default=-1 minimum=-1 maximum=255 Displayed(tab/group)=DSAP (/Match Criteria - Dsap Ssap) |
| dsapMask |
type=int default=-1 minimum=-1 maximum=255 Displayed(tab/group)=Mask (/Match Criteria - Dsap Ssap) |
| ethernetType |
The Ether Type parameter specifies an Ethernet type II value as the match criterion. Deselect
the check box to set the parameter to the default value and select the check box to enter a
value. The range is 1536 to 65 535, or -1. The default is -1, indicating that filtering for this
parameter is disabled.
type=int default=-1 minimum=-1 maximum=65535 Displayed(tab/group)=Ether Type (/Match Criteria - Ethernet II) |
| frameType |
type=acl.FrameType default=e802dot3 Displayed(tab/group)=Frame Type |
| innerTagMask |
It is applied as a mask to VID of the inner VLAN tag of the packet prior to comparing it
with innerTagValue.
This object can only be set to a non-default value if macCritType on the policy is set to 'vid(3)
type=long default=4095 minimum=1 maximum=4095 Displayed(tab/group)=Inner Tag VID Mask (/Match Criteria/VID) |
| innerTagValue |
Specifies the value to match against the VID of the second VLAN tag in the packet
that is carried transparently through the service (the second vlan tag after the
service delimiting tags).
This object can only be set to a non-default value if macCritType on the policy is set to 'vid(3)'.
The (default) value of '-1' indicates no inner VLAN tag matching will be performed.
type=int default=-1 minimum=-1 maximum=4095 Displayed(tab/group)=Inner Tag Value (/Match Criteria/VID) |
| outerTagMask |
It is applied as a mask to VID of the outer VLAN tag of the packet prior to comparing it
with outerTagMask.
This object can only be set to a non-default value if macCritType on the policy is set to 'vid(3)'.
type=long default=4095 minimum=1 maximum=4095 Displayed(tab/group)=Outer Tag VID Mask (/Match Criteria/VID) |
| outerTagValue |
Specifies the value to match against the VID of the first VLAN tag in the packet
that is carried transparently through the service (the first vlan tag after the
service delimiting tags).
This object can only be set to a non-default value if macCritType on the policy is set to 'vid(3)'.
The (default) value of '-1' indicates no outer VLAN tag matching will be performed.
type=int default=-1 minimum=-1 maximum=4095 Displayed(tab/group)=Outer Tag Value (/Match Criteria/VID) |
| snapOui |
Specifies an IEEE 802.3 LLC SNAP Ethernet frame OUI value as a match criterion. The SNAP OUI
parameter is available when the Frame Type parameter is set to e802dot2SNAP. Select the check
box to enable the parameter.
type=acl.SnapOuiValue default=off Displayed(tab/group)=SNAP OUI (/Match Criteria - Snap) |
| snapPid |
Specifies an IEEE 802.3 LLC SNAP Ethernet frame PID value as a match criterion. The SNAP PID
parameter is available when the Frame Type parameter is set to e802dot2SNAP. Select the check
box to enable the parameter.
type=int default=-1 minimum=-1 maximum=65535 Displayed(tab/group)=SNAP PID (/Match Criteria - Snap) |
| sourceMacAddress |
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Source MAC (/Match Criteria) |
| sourceMacAddressMask |
Specifies the mask that is associated with the Source MAC parameter. The Source MAC address and
the associated mask are used to specify a range of MAC addresses as the MAC match criterion for
mapping packets to a forwarding class and priority. Specify a mask for the Mask parameter in
the format xx-xx-xx-xx-xx-xx.
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Mask (/Match Criteria) |
| ssap |
type=int default=-1 minimum=-1 maximum=255 Displayed(tab/group)=SSAP (/Match Criteria - Dsap Ssap) |
| ssapMask |
type=int default=-1 minimum=-1 maximum=255 Displayed(tab/group)=Mask (/Match Criteria - Dsap Ssap) |
| Properties inherited from aingr.Match |
|---|
| id, policerId |
| Properties inherited from aingr.QueueClassificationObject |
|---|
| forwardingClass, forwardingFullClass, forwardingSubClass, priority |
| Properties inherited from policy.PolicyItemDefinition |
|---|
| containingPolicyDisplayedName, containingPolicyId |
| Properties inherited from policy.PolicyObject |
|---|
| description, displayedName, globalPolicy, id, isLocal, policyType, siteId, siteName, templateObject |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from aingr.Match |
|---|
| renum |
| Supported Network Elements | |
|---|---|
| 7450 ESS | |
| 7750 SR |
Supported until 16.0.R1Supported from 16.0.R1 until 23.7.R1
|
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7950 XRS | |
| 7250 IXR |
Supported from 19.5.R1
|
| Product Specifics | |
| 7250 IXR 20.0 | |
| 7250 IXR 21.0 | |
| 7250 IXR 22.0 | |
| 7250 IXR 23.0 | |
| 7250 IXR 24.0 | |
| 7250 IXR 25.0 | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 25.0 | |
| 7705 SAR Hm 20.0 | |
| 7705 SAR Hm 21.0 | |
| 7705 SAR Hm 22.0 | |
| 7705 SAR Hm 23.0 | |
| 7705 SAR Hm 24.0 | |
| 7705 SAR Hm 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |
| 7950 XRS 20.0 | |
| 7950 XRS 21.0 | |
| 7950 XRS 22.0 | |
| 7950 XRS 23.0 | |
| 7950 XRS 24.0 | |
| 7950 XRS 25.0 | |