| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| destinationIpAddress |
type=InetAddress default=0:0:0:0:0:0:0:0 Displayed(tab/group)=Destination IP (/IP Properties) |
| destinationIpAddressFullMask |
Specifies bitmasking functionality to allow an operator to configure a destination IP
address match based on arbitrary bits set in the IP address. You cannot configure the
Dst Net Mask if you configure the Dst Mask parameter.
type=InetAddress default=0:0:0:0:0:0:0:0 Displayed(tab/group)=Dst Net Mask (/IP Properties) |
| destinationIpAddressMask |
type=int default=0 minimum=0 maximum=128 Displayed(tab/group)=Dst Mask (/IP Properties) |
| destinationOperator |
Specifies match criteria for TCP or UDP packets. Select the check box to enable the
parameter, and configure values according to the option selected. When packets match,
the Forwarding Class and Profile specified in the match entry are assigned to the packets.
type=acl.Operator default=NONE Displayed(tab/group)=Destination Port (/Port Properties) |
| destinationPort1 |
type=int default=0 minimum=0 maximum=65535 Displayed(tab/group)=From Port Dst (/Port Properties) |
| destinationPort2 |
type=int default=0 minimum=0 maximum=65535 Displayed(tab/group)=To Port Dst (/Port Properties) |
| dscp |
type=qos.DscpEnum default=default Displayed(tab/group)=DSCP (/Dscp) |
| dscpMask |
type=int default=0 minimum=0 maximum=63 |
| dstIpPrefixListPointer |
type=Pointer default= Displayed(tab/group)=Destination IPv6 Prefix (/IP Properties) |
| fragment |
Specifies whether fragmented or non-fragmented packets are used as a packet match criterion.
When the off option is selected, no match criterion is specified. When the true option is
selected, the parameter specifies a match on all fragmented IP packets. A match occurs for
each packet that has a non-zero value in the MF bit or the Fragment Offset field of the
IP header. When the false option is selected, the parameter specifies a match on all
non-fragmented IP packets. Non-fragmented IP packets have the MF bit and the Fragment Offset
field set to zero.
type=acl.FragmentItemMatch default=off Displayed(tab/group)=Fragment |
| ipAddressType |
type=rtr.InetAddressType access=read-create default=ipv6 |
| protocol |
type=acl.Protocol default=ALL minimum=-1 maximum=255 Displayed(tab/group)=Protocol |
| sourceIpAddress |
type=InetAddress default=0:0:0:0:0:0:0:0 Displayed(tab/group)=Source IP (/IP Properties) |
| sourceIpAddressFullMask |
type=InetAddress default=0:0:0:0:0:0:0:0 Displayed(tab/group)=Src Net Mask (/IP Properties) |
| sourceIpAddressMask |
type=int default=0 minimum=0 maximum=128 Displayed(tab/group)=Src Mask (/IP Properties) |
| sourceOperator |
Specifies match criteria for TCP or UDP packets. Select the check box to enable the
parameter, and configure values according to the option selected. When packets match,
the Forwarding Class and Profile specified in the match entry are assigned to the packets.
type=acl.Operator default=NONE Displayed(tab/group)=Source Port (/Port Properties) |
| sourcePort1 |
type=int default=0 minimum=0 maximum=65535 Displayed(tab/group)=From Port Src (/Port Properties) |
| sourcePort2 |
type=int default=0 minimum=0 maximum=65535 Displayed(tab/group)=To Port Src (/Port Properties) |
| srcIpPrefixListPointer |
type=Pointer default= Displayed(tab/group)=Source IPv6 Prefix (/IP Properties) |
| tagId |
This value specifies tag identification associatied with the entry.
type=long default=0 minimum=0 maximum=255 Displayed(tab/group)=Tag ID |
| vxlanVniOperator |
The value specifies the manner in which vxlanVniValue1 and vxlanVniValue2 are to be used.
type=aingr.VniOperator default=none Displayed(tab/group)=Operator (/VXLAN-VNI Properties) |
| vxlanVniValue1 |
The value specifies the first part of VNI identifier of the VXLAN to be used for the traffic matching.
type=int default=0 minimum=0 maximum=16777215 Displayed(tab/group)=Value1 (/VXLAN-VNI Properties) |
| vxlanVniValue2 |
The value specifies the second part of VNI identifier of the VXLAN to be used for the traffic matching.
type=int default=0 minimum=0 maximum=16777215 Displayed(tab/group)=Value2 (/VXLAN-VNI Properties) |
| Properties inherited from aingr.Match |
|---|
| id, policerId |
| Properties inherited from aingr.QueueClassificationObject |
|---|
| forwardingClass, forwardingFullClass, forwardingSubClass, priority |
| Properties inherited from policy.PolicyItemDefinition |
|---|
| containingPolicyDisplayedName, containingPolicyId |
| Properties inherited from policy.PolicyObject |
|---|
| description, displayedName, globalPolicy, id, isLocal, policyType, siteId, siteName, templateObject |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from aingr.Match |
|---|
| renum |
| Supported Network Elements | |
|---|---|
| 7750 SR | |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7450 ESS |
Supported from 8.0.R1 until 10.0.R1
|
| 7950 XRS | |
| 7250 IXR |
Supported from 19.5.R1
|
| Product Specifics | |
| 7250 IXR 20.0 | |
| 7250 IXR 21.0 | |
| 7250 IXR 22.0 | |
| 7250 IXR 23.0 | |
| 7250 IXR 24.0 | |
| 7250 IXR 25.0 | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 25.0 | |
| 7705 SAR Hm 20.0 | |
| 7705 SAR Hm 21.0 | |
| 7705 SAR Hm 22.0 | |
| 7705 SAR Hm 23.0 | |
| 7705 SAR Hm 24.0 | |
| 7705 SAR Hm 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |
| 7950 XRS 20.0 | |
| 7950 XRS 21.0 | |
| 7950 XRS 22.0 | |
| 7950 XRS 23.0 | |
| 7950 XRS 24.0 | |
| 7950 XRS 25.0 | |