Overview Package Class Deprecated Help

adp
DomainSubnet

It defines IP range for a SAR-Hm that can be discovered. The parent domain can discover a SAR-Hm node which is in this subnet. A Domain can have multiple subnets. A subnet is expected to be added to a domain only after the domain has been created already to avoid any misconfiguration during dynamic peer prefix creation on the head-end nodes of the domain.

public class DomainSubnet

Properties
carrierId Subnet is applicable only for this carrier. Carrier will be chosen from the available list of carriers.

type=long
access=read-create
default=0
minimum=0
maximum=2
Displayed(tab/group)=Carrier (/Cellular Carrier Details)
domainId It indicates the id of the Domain to which this Subnet belongs.

type=int
access=read-only
default=0
minimum=1
maximum=1000
enableAdp ADP current state.

type=adp.ADPOperation
default=off
Displayed(tab/group)=ADP Enable (/ADP)
sites Number of Domain Sites entries with their SIM1 IP address in this subnet range. The maximum is the number of hosts in a subnet with a /16 range.

DEPRECATED: 20.6 - Support of adp.DomainSubnet.Sites will be removed in a future release.
type=int
access=read-only
default=0
minimum=0
maximum=65550
Displayed(tab/group)=Matching Sites
subnetAddress It indicates the IP address of the subnet. For example: 10.10.3.0

type=InetAddress
access=read-create
Mandatory on create
Displayed(tab/group)=Subnet Address
subnetAddressType Specifies the address type of the Subnet IP Address.

type=rtr.InetAddressType
default=ipv4
subnetPrefix It indicates the bitmask of the subnet IP Address. For example: 24 Supported mask range is 16 to 32 for IPv4 and 112 to 128 for IPv6 type addresses.

type=int
access=read-create
default=16
minimum=16
maximum=128
Displayed(tab/group)=Subnet Prefix
  
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed