| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| adp.ImsiPrefix-Set |
type=Children-Set |
| bgpConnectRetryTime |
Specifies the value (in seconds) of the BGP Connect Retry timer.
type=int default=120 minimum=1 maximum=65535 units=seconds Displayed(tab/group)=Connect Retry Time (/BGP Configuration) |
| bgpDampOscErrorInterval |
Specifies the time in minutes after a session reset, during which the session must be error-free
in order to reset the penalty counter and return idle-hold-time to dampOscInitialWaitTime.
type=long default=5 minimum=0 maximum=2048 units=minutes Displayed(tab/group)=Damp Error Interval (/BGP Configuration) |
| bgpDampOscInitialWaitTime |
Specifies the time in minutes, that a session remains in the idle-state after it has been stable for a while.
type=long default=0 minimum=0 maximum=2048 units=minutes Displayed(tab/group)=Damp Initial Wait Time (/BGP Configuration) |
| bgpDampOscMaxWaitTime |
Specifies the maximum amount of time in minutes, that the session remains
in the idle-state after it has experienced repeated instability.
type=long default=10 minimum=1 maximum=2048 units=minutes Displayed(tab/group)=Damp Max Wait Time (/BGP Configuration) |
| bgpDampOscSecondWaitTime |
Specifies the time in minutes, that is doubled after each repeated
session failure that occurs within a relatively short span of time.
type=long default=3 minimum=1 maximum=2048 units=minutes Displayed(tab/group)=Damp Second Wait Time (/BGP Configuration) |
| bgpDampPeerOscillations |
Specifies whether damping peer oscillations is enabled for this BGP instance or not.
type=generic.TruthValue default=true |
| bgpGroupName |
It indicates the name of the BGP group.
type=string minimum=0 maximum=32 Displayed(tab/group)=BGP Group Name (/BGP Configuration) |
| bgpHoldTime |
Specifies the value (in seconds) of the BGP Hold Time."
type=int default=90 minimum=0 maximum=65535 units=seconds Displayed(tab/group)=Hold Time (/BGP Configuration) |
| bgpKeepAlive |
Specifies the value (in seconds) of the BGP Keep-alive timer. A keep-alive message is sent every time this timer expires.
A value of 0 means the timer is off.
type=int default=30 minimum=0 maximum=21845 units=seconds Displayed(tab/group)=Keep-Alive (/BGP Configuration) |
| bgpLoopDetect |
Determines how the peer session should deal with loop detection in the AS Path.
type=int default=discardRoute Displayed(tab/group)=Loop Detect (/BGP Configuration) enums= 1: drop - Drop 2: ignore - Ignore 3: off - Off 4: discardRoute - Discard Route |
| carrierName |
The name to associate with this Carrier.
type=string minimum=1 maximum=32 Displayed(tab/group)=Name |
| cellularCurrentPin |
This is NFMP only attribute used validate the current PIN configured for
the domain is same as the previously entered value for New PIN
configuration.
type=string default=0000 minimum=0 maximum=8 Displayed(tab/group)=Current PIN (/PIN Security) |
| cellularNewPin |
The value of cellularNewPin specifies the PIN (Personal Identification
Number) used to secure/access 7705 SR-Hm nodes.
type=string default= minimum=0 maximum=8 Displayed(tab/group)=New PIN (/PIN Security) |
| description |
A user provided description for this Carrier.
type=string default= minimum=0 maximum=255 Displayed(tab/group)=Description |
| domainAdpSystemIP |
Specifies the domain setting how the system IP will be allocated to the node getting discovered.
When the type of Domain is cellularInterface or cellularDynamic, the valid value is useXML.
Otherwise this value can be either verify or learn only.
type=adp.IpAllocation access=read-only default=verify |
| firmwareVersion |
Specifies expected SAR-Hm firmware version.
type=string minimum=0 maximum=64 Displayed(tab/group)=SAR-Hm Firmware Version (/Firmware) |
| id |
The ID of the Carrier.
type=int access=read-create default=0 minimum=1 maximum=2 Displayed(tab/group)=ID |
| mtuSize |
Specifies the MTU size to be configured on the PDN interfaces of SAR-Hm NEs.
type=int access=read-create default=1430 minimum=512 maximum=1486 units=bytes Displayed(tab/group)=MTU Size |
| pdnProfileId |
The ID of the PDN Profile.
PDN Profile with Id greater than 2 is applicable on SAR-Hm/Hmc nodes from version TiMOS 20.7.R1 onwards
type=long access=read-create default=-1 Displayed(tab/group)=PDN Profile (/PDN Profile) |
| sarHmcFirmwareVersion |
Specifies expected SAR-Hmc firmware version.
type=string minimum=0 maximum=64 Displayed(tab/group)=SAR-Hmc Firmware Version (/Firmware) |
| type |
The type of Mode supported by this Carrier.
type=adp.DomainType access=read-only default=cellularSystem |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7705 SAR Hm | |